Swann SwannOne SWO-KEF1PA User manual

At a Glance
Thank you for choosing the SwannOne™ Key Fob. The SwannOne Key Fob
allows you to activate Home, Away and Night modes without the need for a
Smartphone.
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1)This device may not cause harmful interference, and (2) This device must accept any
interference received, including interference that may cause undesired operation.
Disposal and Recycling Information
Correct Disposal of this product. This marking indicates that this product should not be disposed
with other household wastes throughout the EU. To prevent possible harm to the environment or
human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable
reuse of material resources. To return your used device, please use the return and collection systems
or contact the retailer where the product was purchased. They can take this product for environment
safe recycling.
Battery Safety Information
• This product contains a coin/button cell battery. If the coin/button cell battery is swallowed, it
can cause severe internal burns in just 2 hours and can lead to death. Keep away from babies
and small children at all times.
• If battery is swallowed or placed inside any part of the body, immediately seek medical help.
• Risk of explosion if battery is replaced by an incorrect type.
• Dispose of used battery promptly. QSGKF211015E
Discover More SwannOne Smart Home Solutions
EN
Quick Start Guide
Key Fob
At a Glance Compliance Information
Status LED
Home Mode Button
Away Mode Button
Night Mode Button
Panic Button
Key Ring
© Swann Communications 2015
www.swannone.com
READ ME
FIRST
Key Fob
Indoor
Camera
Outdoor
Camera
Smart Plug
Motion
Sensor
Door/Window
Sensor
Indoor
Siren
Outdoor Siren
Zen
Thermostat™
Smart
Hub

Activate Pair Modes Need Help?
1Slide the back cover off. 2Pull out the protective strip to
engage the battery and activate the
key fob.
The Key Fob works as a remote control within your SwannOne system, offering a quick
and convenient way for you to activate Home, Away or Night mode with a press of a
button. You can also alert family members on your contact list if you require assistance
with the Panic button.
Get more information regarding the setup and use of your product on the web at
swannone.com, or contact our multi-lingual support team anytime via:
[email protected]
USA & Canada 1800 627 2799
UK & Europe 0808 168 9031
Australia 1800 788 210
New Zealand 0800 479 266
Protective Strip
Connect
Button
(twice)
Customizable modes
The Home, Away and Night security mode profiles for
your SwannOne system can be customizable via the
SwannOne app or web platform.
If you're using the SwannOne app, simply press and
hold any of the Mode buttons on the home screen and
then select "Manage Modes" from the popup menu.
If you're using the SwannOne web platform
(home.swannone.com), simply select "Manage Modes"
located above the Mode buttons on your dashboard.
SwannOne Warranty
Your SwannOne products are backed by a full 12 month guarantee from the date of
purchase. In the unlikely event of anything going wrong, you can have confidence that
your purchase is protected. Refer to swannone.com for terms and conditions.
If the Key Fob is not connecting as expected, try performing a hard reset by pressing and
holding the Connect button until the status LED blinks rapidly.
If the key fob is not connecting as expected, perform a key fob reset by pressing and
holding the Connect button until the status LED blinks rapidly, and then try pairing the
key fob again.
1Sign in to your SwannOne account at
home.swannone.com.
2From your web account dashboard, go to
My Devices > Key Fobs and add a device.
3When the Setup page appears, put your
Smart Hub in pairing mode by selecting
Learn devices.
4Press the Connect button on the key fob.
The LED blinks once. When pairing is
complete, the status LED blinks twice.
Check the Setup page to confirm the key
fob was paired successfully, and then finish
the setup process by following the on-screen
instructions.