SWEEX PU102 - QUICK_START_GUIDE Reference manual

English version
4
English version
PU102 Sweex 2 Port Serial ATA PCI Card
Introduction
First of all, many thanks for purchasing this Sweex 2 Port Serial ATA PCI Card. This card enables you to simply add two Serial ATA ports to your PC.
This card at the same time offers you the option of using these externally, internally or a combination of the two.
To ensure this product operates correctly, we advise you to carefully read this manual first. If despite this manual you still experience problems during
installation or operation of this product, go to www.sweex.com and look under the heading service & support.
Hardware
Take the following precautionary measures prior to installing the hardware:
1. Ensure the PC is switched off and disconnected from the mains.
2. Also, disconnect the printer and monitor cables (they have their own power supplies) to make absolutely sure the PC is not live.
3. Now unscrew the computer casing.
4. Subsequently, remove any static electricity you may carry on your body. Do this by touching a (neutral) pipe of the central heating system or an
unpainted water pipe, among other things. Please note that you must not use a magnetic screwdriver for this. Before you proceed any further,
briefly touch the iron frame of the PC casing. Make sure that you minimise contact with any contact points of the PC, PCI card or the memory.
5. Find a vacant PCI slot and remove the metal guard plate part of the computer casing in front of the relevant slot. On occasion the card does not
allow for it to be inserted in the PCI slot smoothly. Should this be the case, do not force anything, but try another available slot.
6. Once the card has been successfully installed, check whether all other cards are still properly inserted in the PCI slots. It is possible that the other
PCI cards are lifted up slightly when installing a new PCI card; as a result, the relevant cards or even the entire PC may no longer operate correctly.
7. Replace the casing on the computer base and correctly reconnect all cables.
8. Switch on the PC again.
Installation under Windows 2000 and XP
We advise you to ensure the operating system is up-to-date before starting the installation. This can be easily checked by starting up Internet Explorer
and selecting the option “Windows Update” in the “Extra” menu.
Once the hardware has been detected, Windows shows the following screen:
Select “No, not this time” and click “Next”.

English version
5
In the next screen, select “Install from a list or specific location” and click “Next”.
Tick the second option: “Include this location”. Insert the Sweex CD-ROM in the CD-ROM player. Go to the Sweex CD-ROM via “Browse”, and select
the folder “Drivers”. In this folder, select the relevant operating system; winxp or win2k. Then click “Next”.
Note: In the illustration, “X” stands for our CD-ROM drive. This may be a different drive letter!
Now the hardware has been installed successfully. Finally click “Finish”.
Installation of Windows Vista
Ensure the computer is connected to the Internet. Vista downloads and installs the drivers automatically.
Warranty
All products under the Sweex brand are warranted for a period of three years. We do not grant support or warranties for any software and/or
(rechargeable) batteries included. Warranty claims are only settled via the dealer where the product concerned was purchased.
The rightful owner has and retains title to all brand names and related rights mentioned in this manual.