Swidget Wi001uwa User manual

Button Press

and Hold LED State Action

Less than 1 sec No Change None

1 - 5 sec Green ON<>OFF Manual Outlet Toggle

5 - 10 sec No change None

10 - 15 sec Blue ON Network Pairing Mode

More than 15 sec OFF None - button press ignored

LED COLOR CODE DESCRIPTION

Green Blue Red

ON OFF OFF Outlet ON, Radio Connected

OFF OFF OFF Outlet OFF, Radio Connected

OFF Flash OFF Radio network pairing mode



Off>On On>Off OFF PAIRING OK Blue on solid for 5

sec, LED (Green) indicates state

OFF OFF Flash PAIRING FAIL after 60 sec



OFF OFF Flash Network Connection FAIL



Push to

Install

Side Latches

IMPORTANT SAFETY INSTRUCTIONS

Model No.: WI001UWA

INSERT BUTTON ACTIONS

FCC COMPLIANCE STATEMENT:

This device complies with part 15 of the FCC and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

(1) this device may not cause harmful interference, and

(2) this device must accept any interference received, including interference that may cause undesired operation.

FCC NOTE: 



NOTE:



-





- Reorient or relocate the receiving antenna.





- Consult the dealer or an experienced radio/TV technician for help.

Important note:



LED INDICATOR CHART

SAVE THESE INSTRUCTIONS

PROBLEMS or QUESTIONS:

         

Swidget Outlet or Insert, contact our tech support team:

[email protected]

For the most up-to-date product support, accessories,

electronic (PDF) format manuals and more, visit

www.swidget.com

No user serviceable parts in this unit.

If you have problems with the router, please consult the

manufacturer for the appropriate support

OPERATION:

MANUAL OUTLET SWITCHING - Works with radio connection only

1. Lightly press Insert push button and hold for 1-5 seconds then release. Outlet will toggle state.

Wi-Fi NETWORK PAIRING/JOINING



Wi-Fi operations are possible during this activity.

2. Follow App based pairing steps for Wi-Fi connection.

3. Insert will remain in pairing mode for up to 60 seconds. If successful, LED will be solid blue for 5 seconds then return to the normal operational state. IF FAILED to connect after 60 seconds, red LED will



INSTALLATION:

1. TO AVOID SHOCK OR DEATH, IT IS RECOMMENDED TO TURN OFF POWER AT CIRCUIT BREAKER OR FUSE AND TEST THAT

THE POWER IS OFF BEFORE INSTALLING OR REMOVING INSERT.

2. This device is to be installed in a Swidget outlet ONLY.

3. Orient the Insert to line up with the pins in the Outlet cavity. NOTE: alignment pins will prevent incorrect installation.

4. Push Insert into the Outlet cavity until the two side latches engage.

5. Re-enable power to Outlet.



b. For Inserts being moved, the Insert will power up with the previous location settings.

7. Search Google Play or Apple App store for “Swidget”.

DESCRIPTION:





then be monitored and setup for use.

FEATURES:

• USB Power - 5VDC@2A (BC1.2)

• One controlled AC receptacle (marked “CONTROLLED”)

• Remote ON/OFF control via wireless router

• Local and Remote modes available

• Manual ON/OFF control via front panel push button

• One ALWAYS ON AC receptacle

• Independent power monitoring of both AC receptacles

• Wi-Fi Compatible





WARNING AND CAUTIONS:

• WHILE NOT REQUIRED, IT IS RECOMMENDED TO AVOID ANY RISK OF SHOCK OR DEATH, TURN OFF POWER AT CIRCUIT BREAKER OR

FUSE AND TEST THAT THE POWER IS OFF BEFORE INSTALLING OR REMOVING ANY INSERT.

• 

• For INDOOR use only: 32-104F (0-40C).

• Use only appropriate Class 2 connectors with interconnecting cables.

• Any output cable connected to the Class 2 output shall be routed away from the receptacle outlet slots or any plug/cord inserted into the receptacle.

• Class 2 output connections are not intended for supporting products or appliances.

• 

instructions to check compatibility.

• Do not use Wi-Fi devices to control electric heaters or any other appliances which may present a hazardous condition due to unattended or

• unintentional or automatic power on control.

• Double check any external Wi-Fi programming for accuracy before using them.

• Insert can only be installed in one orientation. Rear alignment pins prevent incorrect installation. Do not forcibly install an Insert.

• For reference, the controlled Swidget receptacle is marked on the face as “CONTROLLED”.

• Do not exceed the load rating for the Swidget outlet:

• Resistive: 1800W

• 

• Inductive: 8A@125VAC (PF0.4)

• 

• Actual wireless performance in a home depends on the numbers of walls/obstacles between the Insert and wireless router.

• Use with Swidget Outlet Model Number R1015SWA.

Wi-Fi Control + USB

USB Output 5V@2A

DESCRIPTIF:







CARACTÉRISTIQUES:

• Alimentation USB – 5VDC@2A (BC1.2)

• 

• 



• 

• 

du panneau avant

• 

• 

prises CA

• Compatible Wi-Fi

• 

• 

“CONTROLLED”

Bouton Enfoncé

en Continu État de la DEL Fonctionnement

Moins de 1 sec Aucun changement Aucun

1 - 5 sec Vert



Basculement manuel de

la prise

5 - 10 sec Aucun changement Aucun

10 - 15 sec  Mode APPARIEMENT au

réseau

  Aucun – bouton enfoncé

ignoré

CODE DE COULEUR DEL DESCRIPTIF

Vert Bleu Rouge

   

   

 CLIGNOTE-

MENT  

DEL bleu clignotera







 

Appariement A RÉUSSI. DEL sera

bleu pendant 5 secondes. DEL (vert)



  CLIGNOTE-

MENT

Appariement A ÉCHOUÉ. après 60

secondes.DEL rouge clignotera

  CLIGNOTE-

MENT

Connexion au réseau A ÉCHOUÉ DEL

rouge clignotera

Push to

Install

Side Latches

CONSIGNES DE SÉCURITÉ IMPORTANTES

USB + Contrôle Wi-Fi

Model No.: WI001UWA

FONCTIONNEMENT DU BOUTON DE L’INSERT

DÉCLARATION DE CONFORMITÉ FCC:





1) ne cause aucun brouillage préjudiciable et



MISE EN GARDE DE LA FCC: 



MISE EN GARDE:



MISE EN GARDE:









des mesures suivantes:







- consulter le détaillant ou un technicien expérimenté en matière de radios ou de téléviseurs.

MISE EN GARDE IMPORTANTE:





CONSERVER SOIGNEUSEMENT CES DIRECTIVES

TABLEAU DE L’INDICATEUR DEL

FONCTIONNEMENT:

COMMUTATION MANUELLE DES PRISES – fonctionne uniquement avec la connexion radio



La prise va basculer le mode.

APPARIEMENT/RACCORDEMENT AU RÉSEAU Wi-Fi

 





 



PROBLÈMES OU QUESTIONS:





[email protected]





(PDF) et plus encore, visitez le site www.swidget.com.



Si vous rencontrez des problèmes avec le routeur, veuillez consulter le



INSTALLATION:

1. POUR ÉVITER LES RISQUES DE CHOC ÉLECTRIQUE OU D’ÉLECTROCUTION,, IL EST RECOMMANDÉ DE COUPER

L’ALIMENTATION AU DISJONCTEUR OU À LA FUSIBLE ET VÉRIFIER QUE L’ALIMENTATION EST ÉTEINTE AVANT D’INSTALLER

OU DE RETIRER UN INSERT.





installation incorrecte.







AJOUTER au réseau (voir ci-dessous).





-

EIL EST INTERDITE ET ANNULE LA GARANTIE.

AVERTISSEMENTS ET MISES EN GARDE:

• BIEN QU’IL NE SOIT PAS NÉCESSAIRE, IL EST RECOMMANDÉ D’ÉVITER TOUT RISQUE DE CHOC ÉLECTRIQUE OU D’ÉLECTROCUTION;

COUPER L’ALIMENTATION AU DISJONCTEUR OU À LA FUSIBLE ET VÉRIFIER QUE L’ALIMENTATION EST ÉTEINTE AVANT D’INSTALLER

OU DE RETIRER UN INSERT.

• 

• 

• 

• 

• 

• 



• 



• 

• 

un Insert.

• 

• Ne pas dépasser la charge nominale de la prise Swidget:

• Résistif: 1800W

• Motorisé: 0.5 ch

• Inductif: 8A @ 125VAC (PF 0.4)

• 

• 