Swiss Madison Beau SM-BV720KGCA User manual

Alumlnum
Frame
Vanity
Base
Vanity
Sink
— 1 —

1:Left side panel
2:Right side panel
3:Top panel
4:Back panel
5:Bottom panel
6:Drawer front panel
7:Drawn left panel
8:Drawn right panel
9:Drawn bottom panel
10:Drawn back panel
A.Cam bolt
B.Cam lock
C.Cam patch
65mm
Screw 4 cam bolts(A)into the left side panel(1) .Repeat for the right side panel(2)
Screw 4 cam bolts(A)into the Bottom panel(5)
Screw 2 cam bolts(A)into the Back panel(4)
— 2 —

Connect the back panel (4)to the top panel (3) Use 2 cam locks (B) to secure in the place.
Attach the top panel and back panel to the left side panel(1) and secure using 4 cam locks(B).
Attach the top panel and back panel to the right side panel(2) and secure using 4 cam locks(B).
Connect the bottom panel (5)to the left/right side panel Use 4 cam locks (B) to secure in the place.
2.Assemble cabiaet body
3.Install drawn panel
66-4
6-1 6-2
Screw 4 cam bolts(A)into the drawn left side panel(6-1).Repeat for the right side panel(6-2)
Screw 5 cam bolts(A)into the drawn front panel(6)
Screw 2 cam bolts(A)into the drawn back panel(6-4)
— 3 —

5.Assemble drawn panel
6.Install aluminum frame
Connect the drawn back panel (6-4)to the drawn bottom panel (6-3) Use 2 cam locks (B)
to secure in the place.
Attach the drawn back panel (6-4)and drawn bottom panel (6-3)to the drawn left side panel and
secure using 4 cam locks(B).
Repeat for the drawn right side panel(6-2).
Connect the drawn front panel (6)to the left/right drawn side panel Use 6 cam locks (B) to
secure in the place.
— 4 —

8
7
8
7.Assemble aluminum frame
Connect the 25*25*640 aluminum bar (1) to the 25*25*465 aluminum bar (2) use 4 M4*10 screw (6).
Repeat the previous step.
Connet the 25*25*540 aluminum bar(3/4) to the 25*25*640 aluminum bar (1).Note that the aluminum
bar with hole (4) is installed at the bottom.
Attach the cabinet body to the aluminum frame and secure using 4 M4*20 screw (8)
— 5 —