Swiss Madison Carre SM-BV380 User manual

www.swissmadison.com | 1-434-623-4766 | [email protected]
INSTALLATION INSTRUCTIONS
Freestanding Vanity
@SwissMadison
#WellMadeForever

—1 —
If you have any questions or concerns please contact us:
1-434-623-4766
[email protected]
PRIOR TO INSTALLATION:
· Inspect product to ensure no damages have occurred while in shipping.
· Observe all plumbing and building codes in accordance with your state and local requirements.
·Floor must be level prior to installation of vanity.
· All dimensions are nominal! Be sure to measure your vanity prior to installation.
· The step-by-step guidelines in the installation instructions are a general reference. Should there be
any discrepancies, Swiss Madison cannot be held liable. It is recommended to install all Swiss
Madison products by hiring a licensed professional.
· Read installation and maintenance instructions thoroughly before installing. Be sure to use proper
tools and always wear proper personal safety accessories for your protection.
INCLUDED PARTS:SUGGESTED TOOLS & MATERIALS:
Vanity
Sink
Vanity
Base
FREESTANDING VANITY INSTALLATION INSTRUCTIONS
Adhesive
Drop Cloth
Silicone
Gloves
Safety
Glasses
Level
Hardware
Screwdrivers
Drill

—2 —
1. Prepare Cabinet Panels
·Insert 8 cam bolts (A) into the left side panel (1) as shown.
·Select a drawer slide (E) and line it up with the predrilled holes on the left side panel (1) as shown. Attach
with 2 screws (G). Use an additional 4 screws (G) and an electric drill to secure the drawer slide (E) into
place. Repeat this step for the second drawer slide (E).
·Repeat all of the above steps to the right side panel (2).
·Insert a wooden dowel (C) into each side of the rear top bar (4) and the rear bottom bar (5) as shown.
·Insert 2 wooden dowels (C) per side of the base panel (3) as shown. Screw 2 cam bolts (A) into the
base panel (3).
FREESTANDING VANITY INSTALLATION INSTRUCTIONS
Parts for Reference:
1. Left side panel
2. Right side panel
3. Base panel
4. Rear top bar
5. Rear bottom bar
6. Front top bar
7. Faux drawer panel
8. Drawer A - front panel
9. Drawer B - front panel
10. Drawer A - left panel
11. Drawer A - right panel
12. Left back panel
13. Right back panel
14. Drawer A - base panel
15. Drawer B - left panel
16. Drawer B - right panel
17. Drawer B - back panel
18. Drawer B - base panel
19. Small shelf
20. Large shelf
21. Frame Side Panels
22. Frame Connectors
A. Cam bolts
B. Cam locks
C. Wooden dowels
D. Metal bracket
E. Drawer slides
F. Screw & Plastic Anchor
G. Screws
H. Screws
I. Drawer handles
J. Screws
K. Inner drawer channel
L. Screws
M. Screws
N. Leveling Feet
14mm
25mm
10mm
30mm
A
G
H
I
J
K
L
B
C
D
E
F M
1
2
3
19
20
21
22
22
22
22
21
67
8
9
15
17
18
16
10
12
13
14
11
5
4
A
AA
A
A
A
A
A
A
A
A
AA
A
A
C
C
C
C
A
A
A
C
C
C
C
12
3
4
5
N
G4
E
G2
E

6
4
3
2
1
5
—3 —
3. Assemble Cabinet Body
·Attach the rear top bar (4) and the front top bar (6) to the right side panel (2) as shown. Secure in place
usng 2 cam locks (B) each.
·Attach the base (3/5) to the right side panel (2) using 2 cam locks (B) to secure.
·Repeat the above steps to attach and secure the left side panel (1) to the cabinet body.
2. Assemble Base
·Connect the rear bottom bar (5) to the base panel (3) as shown.
·Use 2 cam locks (B) to secure into place as shown.
FREESTANDING VANITY INSTALLATION INSTRUCTIONS
3
5
3
5
BB
BBBBB
B
BB
B
B
B
B
B
B
BB

21
21
22 22
22
22
NN
N
M
MM
M
M
M
M
M
N
—4 —
4. Assemble Cabinet Frame
·Align a frame side panel (21) with 4 frame connectors (22) as shown in the drawing below. Attach the remaining
frame side panel (21) as well.
·Insert and tighten 8 screws (M) into place as shown in the drawing to secure the frame
·Flip the frame over so the bottom of the legs are exposed. Screw 4 leveling feet (N) into the legs as shown in
the drawing below.
FREESTANDING VANITY INSTALLATION INSTRUCTIONS

19
19
19
20
20
G
G
G
G
G
G
G
G
G
G
G
G
—5 —
6. Attach Cabinet Frame to Body
·Use 4 screws (G) to attach the cabinet frame to the bottom of the cabinet body as shown.
5. Assemble Cabinet Frame
·Attach the small shelf (19) to the metal frame as shown. Secure into place with 4 screws (G).
·Attach the large shelf (20) to the metal frame as shown. Secure into place with 4 screws (G).
FREESTANDING VANITY INSTALLATION INSTRUCTIONS

8
8
11
11
13
13
14
12
12
10
10
K
1.
2.
3.
6a. Assemble Drawer A
·Screw 7 cam bolts (A) into Drawer A - Front panel (8) as shown.
·Screw 4 cam bolts (A) into both Drawer A - left panel (10) and Drawer A - right panel (11) as shown. Screw 1
cam bolt (A) into both the left back panel (12) and the right back panel (13) as shown.
·Connect all Drawer A panels together (8,10,11,12,13,14) as shown in the drawing below. Secure into place using
17 cam locks (B).
·Use 3 screws (H) to attach the drawer handle (I) to the Drawer A - front panel (8) as shown.
·Slide the inner drawer channel (K) into the cutout of the Drawer A - base panel (14) as shown. Use 7 screws (G)
to secure the inner drawer channel (K) to the small drawer as shown. Use an additional 6 screws (G) around the
outside of the inner drawer channel (K) as shown to finish the installation.
—6 —
FREESTANDING VANITY INSTALLATION INSTRUCTIONS
A
A
A
AAA
A
A
B
BBB
B
B
B
B
B
B
B
B
B
B
B
B
B
AA
A
8
HHH
I
A
A
A
A
AA
G x 7 G x 6

9
9
9
16
17
16
17
18
15
15
6b. Assemble Drawer B
·Screw 7 cam bolts (A) into Drawer B - Front panel (8) as shown.
·Screw 4 cam bolts (A) into both Drawer B - left panel (15) and Drawer B - right panel (16) as shown. Screw 3
cam bolts (A) into Drawer B - back panel (17) as shown.
·Connect all Drawer B panels together (9,15,16,17,18) as shown in the drawing below. Secure into place using 18
cam locks (B).
·Use 3 screws (H) to attach the drawer handle (I) to the Drawer B - front panel (9) as shown.
—7 —
FREESTANDING VANITY INSTALLATION INSTRUCTIONS
A
AAA
A
A
B
B
B
B
B
B
B
B
B
B
B
B
BB
BBB
B
B
A
A
A
A
A
A
A
A
A
A
AA
H
H
H
I
1.
2.
3.

7
HH
H
I
7
6
8
9
7. Attach Drawers
·Attach a drawer handle (I) to the faux drawer panel (7) using 3 screws (H).
·Align the faux drawer panel (7) to the front top bar (6) and attach 6 screws (J) as shown.
·Take Drawer A and slide the back panels (12,13) onto the back hooks of the drawer slides (E) as shown in the
drawing. Align the front of the drawer with the front of the slide as shown and slide into place. Secure Drawer A
to the drawer slide (E) using 1 screw (L) per slide.
·Take Drawer B and slide the back panel (17) onto the back hooks of the drawer slides (E) as shown in the
drawing. Align the front of the drawer with the front of the slide as shown and slide into place. Secure Drawer B
to the drawer slide (E) using 1 screw (L) per slide.
—8 —
FREESTANDING VANITY INSTALLATION INSTRUCTIONS
J
J
J
J
J
J
L x 4
Adjust the drawers
up and down

D
D
G x 8
G x 8
—9 —
F
F
4 PCS
Wait 24 hours
before use.
24H
!
Option 2: Securing to Drywall & Wood Stud
Option 1: Securing to Drywall
8. Secure Vanity to Wall
9. Vanity Top Installation
·Attach 2 metal brackets (D) to the rear top bar (4)
using 16 screws (G).
·Mark desired mounting location on wall and ensure
placement is level.
·Select installation option 1 or 2.
·Install faucet and drain according to manufacturer’s installation instructions. Do not overtighten,
this may cause the sink to crack.
·Set the vanity top on top of the vanity base, checking the location of the p-trap and drain.
·Remove vanity top from vanity base. Apply a thin bead of silicone around the vanity base and set
the vanity top carefully in place.
·Remove excess silicone with a wet cloth.
·Position cabinet against wall in desired location.
·Using a pencil, make a mark on the wall through
the holes in each bracket (D).
·Move cabinet away from the wall. Create a pilot
hole in each mark on the wall, then insert the
plastic anchor (F).
·Place cabinet against the wall, insert a screw (F)
through the metal bracket (D) into each hole in the
wall, then tighten to plastic anchors (F) to secure
the vanity.
·Position cabinet against wall in desired location,
be sure desired mounting location aligns with
existing wood studs.
·Insert screw (F) through the holes in the metal
bracket (D), then tighten through the drywall into
the wood stud. Repeat this step for the other
metal bracket (D) to secure the vanity.
FREESTANDING VANITY INSTALLATION INSTRUCTIONS

1-434-MADISON
(623-4766)
www.swissmadison.com
ONE YEAR LIMITED WARRANTY
Swiss Madison products are made with quality materials and excellent craftsmanship to provide our cus-
tomers with beautiful, durable, long-lasting products. Should there be any defects in materials or crafts-
manship under regular use that are discovered within the first year of installation, Swiss Madison will
provide replacement parts at no charge, or at its discretion, replace any product or part of the product
that is deemed defective, under normal installation, use, service or maintenance. This warranty applies
only to the original purchaser. Proof of purchase will be required in the instance of a claim.
Swiss Madison recommends all installations of Swiss Madison products to be conducted by a licensed,
professional plumber or contractor. Swiss Madison will not be held responsible for any damage or prod-
uct failure due to improper installation, misuse, or failure to utilize a licensed professional for installation.
Swiss Madison is not responsible for any installation or removal costs.
This One Year Limited Warranty Will Be Voided If:
• The installation recommendations were not followed by the installer
• The product has been moved from its initial place of installation
• The product has in any way been modified from its packaged state
• The product has been subjected to improper maintenance, abuse, misuse, excessive use of
chemicals, accidents, or other damages, etc.
Swiss Madison makes no implication that its products comply with any local building or plumbing codes.
It is the consumer’s responsibility and obligation to determine local code compliance prior to and during
installation. This warranty extends only to the original purchaser and first consumer.
Swiss Madison is not responsible for any special, incidental or consequential damages associated with
the installation, replacement, return or use of the original purchaser’s product. This includes, but is not
limited to: freight costs, labor, travel time, lost profit, home damages and other contingent liabilities and
costs (including, without limitation, costs associated with ‘professionals’ or ‘experts’, investigations,
audits, analyses, attorneys and any other professional/hired services).
The Swiss Madison warranty is a comprehensive and explicit limit of liability. All items not disclosed
within the warranty are not addressable within the responsibility of Swiss Madison. Certain states have
variances regarding implied warranties; in those situations, we remain fully compliant.
If you have any questions or concerns, please contact us directly at
1-434-MADISON (623-4766)
WARNING: Contents of your order may contain sharp and possibly other harmful pieces and may
cause hazard to children and adults. Swiss Madison is not responsible in any way for personal
damages.
well made forever