SWOLE O'CLOCK User manual

Swole O’clock
Manual
6 digits backlit display
1/100th second lap operation
chronograph
12 or 24 hours operation can be set
Time your meals with hours, minutes,
seconds, month, and day of the week information
5 minutes snooze alarm
Hourly chime can be selected

1 - Product Manual
1
L1
L2 R2
R1
FEATURE SELECTION
Default - shows the time: hours (12 or 24 hours system), minutes,
month, date, and the day of the week
Press L1 - the display light turns on
Press R1 - shows month, date, and the day of the week
1.
2.
3.
4.
5.
6.
HOW TO SET ANALOG TIME
Open the latch (pull up) on the right side of the watch face between
R1 and R2, and pull out the crown gently
Rotate the crown left/right to adjust the time
Once set, push the crown back in and close the latch.
1.
2.
3.
While on the default display, press L2 three times. Display will
change to Time Set Mode. You will see seconds digits flashing,
press R1 to reset the seconds to zero (00).
Press R2 once: Minutes digits will flash. Press R1 to set up
minutes.
Press R2: Hour digits will flash, press R1 to set the hour. Advance
to the desired hour. Keep pressing R1 to cycle trough the 1-12
AM/PM (the 12 hours mode - A and P will show next to the hour) to
get to the 24 hours mode (H will show on display). Press R2 to
keep setting date or Press L2 to return to the default display.
1.
2.
3.
Press L2 once - enter Stopwatch mode
Press L2 twice - enter Alarm Set Mode (hours display will flash)
Press L2 three times - enter Time Set Mode (seconds display will
flash)
Press R2 - shows currently set Alarm Time.
HOW TO SET DIGITAL TIME/CALENDAR

2 - Product Manual
2
HOW TO SET DAILY ALARM
While on the default display Press L2 twice. Display will change to
the Alarm Set Mode (note: only hour and minute will appear: 00:00;
hour digits will flash).
Press R1 to set the hour.
Press R2: Minutes will flash, press R1 to set the minutes.
Press L2 to return to default display, and finish setting alarm time.
To test the alarm sound, press and hold R1.
1.
2.
3.
5.
4.
HOW TO ACTIVATE DAILY ALARM, SNOOZE, AND HOURLY CHIME
While on the default display, press and hold R2 then press R1 to
turn the daily alarm ON or OFF (alarm sign in upper right part of the
display will appear when alarm is activated).
When the daily alarm rings, press R2 to stop the alarm. This will
activate the snooze feature, and the alarm will go off again after 5
minutes. Press R1 to stop alarm without activating snooze function.
1.
2.
3.
4.
5. STOPWATCH OPERATION - EVENT AND TIME-OUT TIMING
While on the default display, press L2 once to enter Stopwatch
Mode.
Press R1 to start stopwatch.
Press R1 again to stop stopwatch.
Press R2 to reset stopwatch to “00”.
Press L2 once to return to the default display.
1.
2.
3.
5.
4.
STOPWATCH - CUMULATIVE SPLIT TIMING (LAP TIME)
While on the default display, press L2 once to enter Stopwatch
Mode.
Press R1 to start stopwatch.
Press R2 to display cumulative split time (the stopwatch will
continue to count internally).
Press R2 to release the split time and display cumulative split time
and display over all elapsed time in progress. This may be repeated
as many times as necessary.
Press R1 to stop counting, and press R2 to set up stopwatch to
“00”.
Press L2 once to return to the default display.
1.
2.
3.
4.
5.
6.
While on the default display, press L2 three times, then press R2
three times, date will flash, press R1 to change the date; Press R2
once, month will flash, press R1 to change the month, press R2 to
set the month (not flashing now). Press R1: Day of the week flag
will flash, press R2 to set the day of the week.
Press L2 to return to default display, and finish setting the time.
To activate hourly chime, Press and hold R2. Then, press L2 button
to turn the hourly chime ON or OFF (when all the Day of Week flags
are showing the hourly chime is ON).

3 - Product Manual
3
Water Resistant 50 m - Suitable for everyday use, swimming,
white water rafting, non-snorkeling water related work, and
finishing . Splash/rain resistant.
Please do not press the buttons on the watch when having the
watch wet (ex. during washing your hands) as this might cause the
water to permeate the seals. The watch should be also kept away
from hot steam or vapour.
WATER RESISTANCE