Sylvania IA-1000 User manual

USB BLUETOOTH WIRELESS SPEAKER
SP5686
User Manual

Safety
Know these safety symbols
zThis 'bolt of lightning' indicates uninsulated material within your unit may cause an electrical shock. For the
safety of everyone in your household, please do not remove product covering.
zThe 'exclamation point' calls attention to features for which you should read the enclosed literature closely to
prevent operating and maintenance problems.
zWARNING: To reduce the risk of fire or electric shock, this apparatus should not be exposed to rain or
moisture and objects filled with liquids, such as vases, should not be placed on this apparatus.
zCAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
Important Safety Instructions
zRead these instructions.
zKeep these instructions.
zHeed all warnings.
zFollow all instructions.
zDo not use this apparatus near water.
zClean only with dry cloth.
zDo not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
zDo not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
zProtect the power cord from being walked on or pinched, particularly at plugs, convenience receptacles, and
the point where they exit from the apparatus.
zOnly use attachments/accessories specified by the manufacturer.
zUse only with the cart, stand, tripod, bracket, or table specified by the manufacturer or sold with the apparatus.
When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
zUnplug this apparatus during lightning storms or when unused for long periods of time.
zRefer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged

in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into
the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been
dropped.
zApparatus shall not be exposed to dripping or splashing.
zDo not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles).
zWhere the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall
remain readily operable.
zNever remove the casing of this apparatus.
zNever lubricate any part of this apparatus.
zNever place this apparatus on other electrical equipment.
Notice
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of
the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the
user is encouraged to try to correct the interference by one or more of the following measures:
zRelocate the receiving antenna.
zIncrease the separation between equipment and receiver.
zConnect the equipment into an outlet on a circuit different from that to which the receiver is connected.
zConsult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired
operation. 
Note: Modifications to this product will void the user’s authority to operate this equipment. 

This symbol complies with the standards in force for this type of product.
Disposing of the appliance at the end of its life
This appliance bears the WEEE mark (Waste of Electric and Electronic Equipment) signifying that, at the end of
its life cycle, it should not be disposed of with household waste, but at a recycling centre.
The recycling of waste contributes to the conservation of our environment.
Disposing of batteries at the end of their life
In order to respect the environment, do not throw used batteries out with household waste.
Dispose of them at your nearest recycling centre or at a used battery collection point.
.
To prevent possible hearing damage, do not listen at high volume levels for long periods
DESCRIPTION OF PRODUCT
1, Standby
2, Functions
3, Standby LEDs
4, Backward / Volume –
5, Forward / Volume +
6, Connection status LED
7, Bass Enhance Switch
8, Pair / Play / Pause
9, Speaker
10, DC in
11, USB charge
12, Aux in

Switch on & Connect
Through Bluetooth, connect the SP5686 speaker with your Bluetooth device, such as an iPad,
iPhone, Android phone, or laptop. You can also connect the speaker to an audio device through an Aux-in cable (not
supplied).
MAINS POWER SUPPLY
Caution:
yRisk of damaging the product! Make sure that the input voltage corresponds to the voltage indicated on the
device.
yConnect the mains adapter plug to the socket
yConnect the adapter to a plug socket
Switch on & Connect
1. Press to switch on or off, then press PAIR
2. Pairing with a device for the first time: Blue light flashes fast
Connecting with a paired device: Blue light is on and a Beep sounds.
3. On your Bluetooth device, activate Bluetooth and search for SP5686.
For the first-time connection, select SP5686 to start pairing.
If necessary, enter the password.
4. Connected: Blue light flashes during playback
Play

After successful connection, start music play on the Bluetooth device.
The music streaming may be interrupted by obstacles between the device and SP5686, such as walls, or other
devices nearby that operate in the same frequency.
When music plays from the speaker through an Aux-in cable, increase the volume on the audio player if necessary.
Using the AUX-IN
The AUX-IN Connect input allows users to listen to an external audio source (MP3 player, Smartphone, portable CD
player, etc):
yPlug a 3.5/3.5 mm audio cable (not included) into theAUX-IN Connect input on the back of the device, then
into the headset input of an external auxiliary audio device.
yPress FUNCTION successively: to select AUX-IN mode.
yPlay music from the external peripheral device.
Charge
The USB port provides up to 500 mA.
This allows you to load your mobile phones or tablets.
Specifications
Rated output power: 2 X 3W RMS (THD= 10%)
Bluetooth
Standard: Bluetooth Standard Version 2.1 + EDR
Frequency band: 2.402 ~ 2.480 GHz ISM Band

Range: 10 m (free space)
General information
AC power : Mains adapter: Input: 100-240V ~ 50/60Hz – 5V / 1500mA
Operation Power Consumption: <7 W
Charging : maximum 500 mA for USB
Dimensions : Main Unit (W x H x D): 287 x 165 x 110 mm
Weight : Main Unit: 1.0 kg