Sylvania SP230 User manual

1
Bluetooth Suction Cup Shower Speaker
SP230-BLACK

2
3
Specications
Bluetooth: 3.0 +EDR
Wireless Frequency: 2.4GHz
Loudspeaker Power: 3W x 1
Power: DC 5V- 100-120mA
Battery: 3.7V 400mAh lithium
Charging Time: approx. 3 hours
Operating Time: approx. 2 hours
Transfer Distance: 10M
PDF created with pdfFactory trial version www.pdffactory.com
Play/Pause
Next/Volume UP
Power ON/OFF
MIC
Answer Call/End
call
Previous/
Volume Down

2
3
1. Long press “Power ON /OFF” button for 3 seconds, the
red and blue color indicator light will alternately ashing, this
speaker enters pairing mode.
2. Once you have activated Bluetooth on your device,
select the device name “Sylvania” from the list of available
Bluetooth devices.
If required, enter the password “0000” to conrm to nalize
pairing.
3. Press "Next / Volume UP" or "Previous / Volume DOWN"
to select the music track and volume control.
If you want to pause your music, press the "Play / Pause"
button once.
PDF created with pdfFactory trial version www.pdffactory.com
Speaker
Micro USB
Charging Port
Suction Cup

4
5
4. When there is an incoming call, please press the "Answer
Call / End Call" once to answer the phone, press again when
you nished the phone conversation.
ENEN
6 7
The exclamationpoint
withinthe triangleis a
warning sign alerting
you o f importan t
instructions.
arrowhead within the
triangle is a warning
sign a lerting you of
"dangerous voltage"
inside the product.
CAUTION: TO REDUCE THE RISK
OF E LECTRIC SHOCK, D O NOT
REMOVE C OVER (ON BACK). NO
USER SERVICEABLEPARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IMPORTANT SAFET Y INSTRUCTIONS
INSTRUCTION MANUAL
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO
NOT EXPOSETHISAPPLIANCETO RAIN OR MOISTURE.
1. READ INSTRUCTIONS - All the safety and operating Instructions
should be read before the product Is operated.
2. RETAIN INSTRUCTIONS - The safety and operating Instructions
should be retained for future reference.
3. HEED WARNINGS -All warnings on the product and In the operating
Instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use Instructions
should be followed.
5. CLEANING - Unplugthis productfrom the wall outlet before cleaning,
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
6. ATTACHMENTS - Do not use attachmentsnot recommendedby the
product manufacturer as they may cause hazards.
7. WATER AND MOISTURE - Do not use this productnear water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; In a wet
basement, or near a swimming pool, and the like.
8. ACCESSORIES - Do not place this product on an unstable cart,
stand tripod,bracket,or table. Theproduct may fall, causingseriousInjury
to a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommendedby the manufacturer,
or sold with the product. Any mounting of the product should follow
the manufacturer's Instructions, and should use a mounting accessory
recommended by the manufacture
9. A product and cart combinationshould be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and ca
combination to overturn.
10.VENTILATION - Slots and openingsIn the cabinet are provided for
ventilationand to ensure reliable operation of the product and to protect
It from overheating,and these openingsmust not be blockedor covered.
The openingsshould never be blockedby placing the product on a bed,
sofa, rug, or other similar surface.This product should not be placed In a
built-inInstallationsuch as a bookcaseor rack unless properventilationIs
provided or the manufacturer's Instructions have been adhered to.
11.POWER SOURCES - This productshould be operatedonly from the
type of power sourceIndicatedon the markinglabel. If you are not sure of
the type of power supply to you home, consult your product dealer or local
power company. For productsIntendedto operatefrom batterypower, or
other sources, refer to operating Instruction.
12.GROUNDING OR POLARIZ ATION - This product may b e
equippedwith a polarized alternatingcurrent line plug (a plug having one
way. This is a safety feature. If you are unable to insert the plug fully into
your electricianto replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
ALTERNATE WARNINGS - This product is equippedwith a three-
wire grounding-typeplug, a plug having a third (grounding)pin. This plug
rt

4
5
ENEN
6 7
The exclamationpoint
withinthe triangleis a
warning sign alerting
you o f importan t
instructions.
arrowhead within the
triangle is a warning
sign a lerting you of
"dangerous voltage"
inside the product.
CAUTION: TO REDUCE THE RISK
OF E LECTRIC SHOCK, D O NOT
REMOVE C OVER (ON BACK). NO
USER SERVICEABLEPARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IMPORTANT SAFET Y INSTRUCTIONS
INSTRUCTION MANUAL
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO
NOT EXPOSETHISAPPLIANCETO RAIN OR MOISTURE.
1. READ INSTRUCTIONS - All the safety and operating Instructions
should be read before the product Is operated.
2. RETAIN INSTRUCTIONS - The safety and operating Instructions
should be retained for future reference.
3. HEED WARNINGS -All warnings on the product and In the operating
Instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use Instructions
should be followed.
5. CLEANING - Unplugthis productfrom the wall outlet before cleaning,
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
6. ATTACHMENTS - Do not use attachmentsnot recommendedby the
product manufacturer as they may cause hazards.
7. WATER AND MOISTURE - Do not use this productnear water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; In a wet
basement, or near a swimming pool, and the like.
8. ACCESSORIES - Do not place this product on an unstable cart,
stand tripod,bracket,or table. Theproduct may fall, causingseriousInjury
to a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommendedby the manufacturer,
or sold with the product. Any mounting of the product should follow
the manufacturer's Instructions, and should use a mounting accessory
recommended by the manufacture
9. A product and cart combinationshould be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and ca
combination to overturn.
10.VENTILATION - Slots and openingsIn the cabinet are provided for
ventilationand to ensure reliable operation of the product and to protect
It from overheating,and these openingsmust not be blockedor covered.
The openingsshould never be blockedby placing the product on a bed,
sofa, rug, or other similar surface.This product should not be placedIn a
built-inInstallationsuch as a bookcaseor rack unless proper ventilationIs
provided or the manufacturer's Instructions have been adhered to.
11.POWER SOURCES - This productshould be operatedonly from the
type of power source Indicatedon the markinglabel. If you are not sure of
the type of power supply to you home, consult your product dealer or local
power company. For productsIntendedto operatefrom batterypower, or
other sources, refer to operating Instruction.
12.GROUNDING OR POLARIZ ATION - This product may b e
equippedwith a polarized alternatingcurrent line plug (a plug having one
way. This is a safety feature. If you are unable to insert the plug fully into
your electricianto replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
ALTERNATE WARNINGS - This product is equippedwith a three-
wire grounding-typeplug, a plug having a third (grounding)pin. This plug
rt

6
7
ENEN
6 7
The exclamationpoint
withinthe triangleis a
warning sign alerting
you o f importan t
instructions.
arrowhead within the
triangle is a warning
sign a lerting you of
"dangerous voltage"
inside the product.
CAUTION: TO REDUCE THE RISK
OF E LECTRIC SHOCK, D O NOT
REMOVE C OVER (ON BACK). NO
USER SERVICEABLEPARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IMPORTANT SAFET Y INSTRUCTIONS
INSTRUCTION MANUAL
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO
NOT EXPOSETHISAPPLIANCETO RAIN OR MOISTURE.
1. READ INSTRUCTIONS - All the safety and operating Instructions
should be read before the product Is operated.
2. RETAIN INSTRUCTIONS - The safety and operating Instructions
should be retained for future reference.
3. HEED WARNINGS -All warnings on the product and In the operating
Instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use Instructions
should be followed.
5. CLEANING - Unplugthis productfrom the wall outlet before cleaning,
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
6. ATTACHMENTS - Do not use attachmentsnot recommendedby the
product manufacturer as they may cause hazards.
7. WATER AND MOISTURE - Do not use this productnear water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; In a wet
basement, or near a swimming pool, and the like.
8. ACCESSORIES - Do not place this product on an unstable cart,
stand tripod,bracket,or table. Theproduct may fall, causingseriousInjury
to a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommendedby the manufacturer,
or sold with the product. Any mounting of the product should follow
the manufacturer's Instructions, and should use a mounting accessory
recommended by the manufacture
9. A product and cart combinationshould be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and ca
combination to overturn.
10.VENTILATION - Slots and openingsIn the cabinet are provided for
ventilationand to ensure reliable operation of the product and to protect
It from overheating,and these openingsmust not be blockedor covered.
The openingsshould never be blockedby placing the product on a bed,
sofa, rug, or other similar surface.This product should not be placedIn a
built-inInstallationsuch as a bookcaseor rack unless proper ventilationIs
provided or the manufacturer's Instructions have been adhered to.
11.POWER SOURCES - This productshould be operatedonly from the
type of power source Indicatedon the markinglabel. If you are not sure of
the type of power supply to you home, consult your product dealer or local
power company. For productsIntendedto operatefrom batterypower, or
other sources, refer to operating Instruction.
12.GROUNDING OR POLARIZ ATION - This product may b e
equippedwith a polarized alternatingcurrent line plug (a plug having one
way. This is a safety feature. If you are unable to insert the plug fully into
your electricianto replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
ALTERNATE WARNINGS - This product is equippedwith a three-
wire grounding-typeplug, a plug having a third (grounding)pin. This plug
rt

6
7
ENEN
6 7
The exclamationpoint
withinthe triangleis a
warning sign alerting
you o f importan t
instructions.
arrowhead within the
triangle is a warning
sign a lerting you of
"dangerous voltage"
inside the product.
CAUTION: TO REDUCE THE RISK
OF E LECTRIC SHOCK, D O NOT
REMOVE C OVER (ON BACK). NO
USER SERVICEABLEPARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
IMPORTANT SAFET Y INSTRUCTIONS
INSTRUCTION MANUAL
WARNING:TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,DO
NOT EXPOSETHISAPPLIANCETO RAIN OR MOISTURE.
1. READ INSTRUCTIONS - All the safety and operating Instructions
should be read before the product Is operated.
2. RETAIN INSTRUCTIONS - The safety and operating Instructions
should be retained for future reference.
3. HEED WARNINGS -All warnings on the product and In the operating
Instructions should be adhered to.
4. FOLLOW INSTRUCTIONS - All operating and use Instructions
should be followed.
5. CLEANING - Unplugthis productfrom the wall outlet before cleaning,
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
6. ATTACHMENTS - Do not use attachmentsnot recommendedby the
product manufacturer as they may cause hazards.
7. WATER AND MOISTURE - Do not use this productnear water - for
example, near a bath tub, wash bowl, kitchen sink, or laundry tub; In a wet
basement, or near a swimming pool, and the like.
8. ACCESSORIES - Do not place this product on an unstable cart,
stand tripod,bracket,or table. Theproduct may fall, causingseriousInjury
to a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommendedby the manufacturer,
or sold with the product. Any mounting of the product should follow
the manufacturer's Instructions, and should use a mounting accessory
recommended by the manufacture
9. A product and cart combinationshould be moved with care. Quick stops,
excessive force, and uneven surfaces may cause the appliance and ca
combination to overturn.
10.VENTILATION - Slots and openingsIn the cabinet are provided for
ventilationand to ensure reliable operation of the product and to protect
It from overheating,and these openingsmust not be blockedor covered.
The openingsshould never be blockedby placing the product on a bed,
sofa, rug, or other similar surface.This product should not be placedIn a
built-inInstallationsuch as a bookcaseor rack unless proper ventilationIs
provided or the manufacturer's Instructions have been adhered to.
11.POWER SOURCES - This productshould be operatedonly from the
type of power source Indicatedon the markinglabel. If you are not sure of
the type of power supply to you home, consult your product dealer or local
power company. For productsIntendedto operatefrom batterypower, or
other sources, refer to operating Instruction.
12.GROUNDING OR POLARIZ ATION - This product may b e
equippedwith a polarized alternatingcurrent line plug (a plug having one
way. This is a safety feature. If you are unable to insert the plug fully into
your electricianto replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
ALTERNATE WARNINGS - This product is equippedwith a three-
wire grounding-typeplug, a plug having a third (grounding)pin. This plug
rt
ENEN
8 9
you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet, Do not defeat the safety purpose of the
grounding-type plug.
13.POWER - CORD PROTECTION - Power supply cords should
be routed so that they are not likely to be walked on or pinched by items
placedupon or againstthem, payingparticular attentionto cords at plugs,
convenience receptacles, and point where they exit from the product.
14.PROTECTIVEATTACHMENT PLUG - The product is equipped
with an attachment plug having overload protection. This is a safety
feature.See InstructionManual for replacementor resettingof protective
device. If replacement of the plug is required, b e sure t he service
technician has used a replacement plug specified by the manufacturer
that has the same overload protection as the original plug.
15.OUTDOOR ANTENNA GROUNDING - If an outside antenna
is connected to the receiver, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up
static charges. Article 810 of the National Electrical Code, ANSI/NFPA
70, providesinformationwith regard to proper groundingof the mast and
supporting structure, grounding of the lead-in wire to an antenna-discharge
unit, size of grounding conductors, location of antenna-discharge unit,
connectionto groundingelectrodes, and requirementsfor the grounding
electrode.
16.LIGHTNING- For added protection for this productduring a lightning
storm,or when It Is left unattendedand unused for long periods of time,
unplugIt from the wall outletand disconnectthe antennaor cable system.
This will prevent damage to the product due to lightning and power-line
surges.
17.POWER LINES - An outsideantennasystemshouldnot be locatedIn
the vicinityof overheadpower lines or other electriclight or power circuits,
or where It can fall Into such power lines or circuits. When Installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
18.OVERLOADING - Do not overload wall outlets, extension cords,
electric shock.
19.OBJECT AND LIQUID ENTRY - Never push objectsof any kind
Into this product through openingsas they may touch dangerousvoltage
spill liquid of any kind on the product.
20.SERVICING - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage or
l.
21.DAMAGE REQUIRING SERVICE - Unplug this product from
following conditions:
a) W hen the power-supply cord or plug Is damaged.
b) If liquid has been spilled, or objects have fallen Into the product.
c) If the product has been exposed to rain or water.
d) I f the product does not operate normally by following the operating
Instructions,adjust only those controlsthat are covered by the operating
Instructions as an Improper adjustment of other controls may result In
restore the product to Its normal operation.
e) If the product has been dropped or damaged In any way.
f) When the product exhibits a distinct change In performance - this Indicates
a need for service.

8
9
ENEN
8 9
you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet, Do not defeat the safety purpose of the
grounding-type plug.
13.POWER - CORD PROTECTION - Power supply cords should
be routed so that they are not likely to be walked on or pinched by items
placedupon or againstthem, payingparticular attentionto cords at plugs,
convenience receptacles, and point where they exit from the product.
14.PROTECTIVEATTACHMENT PLUG - The product is equipped
with an attachment plug having overload protection. This is a safety
feature.See InstructionManual for replacementor resettingof protective
device. If replacement of the plug is required, b e sure t he service
technician has used a replacement plug specified by the manufacturer
that has the same overload protection as the original plug.
15.OUTDOOR ANTENNA GROUNDING - If an outside antenna
is connected to the receiver, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up
static charges. Article 810 of the National Electrical Code, ANSI/NFPA
70, providesinformationwith regard to proper groundingof the mast and
supporting structure, grounding of the lead-in wire to an antenna-discharge
unit, size of grounding conductors, location of antenna-discharge unit,
connectionto groundingelectrodes, and requirementsfor the grounding
electrode.
16.LIGHTNING- For added protection for this productduring a lightning
storm,or when It Is left unattendedand unused for long periods of time,
unplugIt from the wall outletand disconnectthe antennaor cable system.
This will prevent damage to the product due to lightning and power-line
surges.
17.POWER LINES - An outsideantennasystemshouldnot be locatedIn
the vicinityof overheadpower lines or other electriclight or power circuits,
or where It can fall Into such power lines or circuits. When Installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
18.OVERLOADING - Do not overload wall outlets, extension cords,
electric shock.
19.OBJECT AND LIQUID ENTRY - Never push objectsof any kind
Into this product through openingsas they may touch dangerousvoltage
spill liquid of any kind on the product.
20.SERVICING - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage or
l.
21.DAMAGE REQUIRING SERVICE - Unplug this product from
following conditions:
a) W hen the power-supply cord or plug Is damaged.
b) If liquid has been spilled, or objects have fallen Into the product.
c) If the product has been exposed to rain or water.
d) I f the product does not operate normally by following the operating
Instructions,adjust only those controlsthat are covered by the operating
Instructions as an Improper adjustment of other controls may result In
restore the product to Its normal operation.
e) If the product has been dropped or damaged In any way.
f) When the product exhibits a distinct change In performance - this Indicates
a need for service.

8
9
ENEN
8 9
you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet, Do not defeat the safety purpose of the
grounding-type plug.
13.POWER - CORD PROTECTION - Power supply cords should
be routed so that they are not likely to be walked on or pinched by items
placedupon or againstthem, payingparticular attentionto cords at plugs,
convenience receptacles, and point where they exit from the product.
14.PROTECTIVEATTACHMENT PLUG - The product is equipped
with an attachment plug having overload protection. This is a safety
feature.See InstructionManual for replacementor resettingof protective
device. If replacement of the plug is required, b e sure t he service
technician has used a replacement plug specified by the manufacturer
that has the same overload protection as the original plug.
15.OUTDOOR ANTENNA GROUNDING - If an outside antenna
is connected to the receiver, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up
static charges. Article 810 of the National Electrical Code, ANSI/NFPA
70, providesinformationwith regard to proper groundingof the mast and
supporting structure, grounding of the lead-in wire to an antenna-discharge
unit, size of grounding conductors, location of antenna-discharge unit,
connectionto groundingelectrodes, and requirementsfor the grounding
electrode.
16.LIGHTNING- For added protection for this productduring a lightning
storm,or when It Is left unattendedand unused for long periods of time,
unplugIt from the wall outletand disconnectthe antennaor cable system.
This will prevent damage to the product due to lightning and power-line
surges.
17.POWER LINES - An outsideantennasystemshouldnot be locatedIn
the vicinityof overheadpower lines or other electriclight or power circuits,
or where It can fall Into such power lines or circuits. When Installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
18.OVERLOADING - Do not overload wall outlets, extension cords,
electric shock.
19.OBJECT AND LIQUID ENTRY - Never push objectsof any kind
Into this product through openingsas they may touch dangerousvoltage
spill liquid of any kind on the product.
20.SERVICING - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage or
l.
21.DAMAGE REQUIRING SERVICE - Unplug this product from
following conditions:
a) W hen the power-supply cord or plug Is damaged.
b) If liquid has been spilled, or objects have fallen Into the product.
c) If the product has been exposed to rain or water.
d) I f the product does not operate normally by following the operating
Instructions,adjust only those controlsthat are covered by the operating
Instructions as an Improper adjustment of other controls may result In
restore the product to Its normal operation.
e) If the product has been dropped or damaged In any way.
f) When the product exhibits a distinct change In performance - this Indicates
a need for service.

10
11
ENEN
8 9
you are unable to insert the plug into the outlet, contact your electrician
to replace your obsolete outlet, Do not defeat the safety purpose of the
grounding-type plug.
13.POWER - CORD PROTECTION - Power supply cords should
be routed so that they are not likely to be walked on or pinched by items
placedupon or againstthem, payingparticular attentionto cords at plugs,
convenience receptacles, and point where they exit from the product.
14.PROTECTIVEATTACHMENT PLUG - The product is equipped
with an attachment plug having overload protection. This is a safety
feature.See InstructionManual for replacementor resettingof protective
device. If replacement of the plug is required, b e sure t he service
technician has used a replacement plug specified by the manufacturer
that has the same overload protection as the original plug.
15.OUTDOOR ANTENNA GROUNDING - If an outside antenna
is connected to the receiver, be sure the antenna system is grounded
so as to provide some protection against voltage surges and built-up
static charges. Article 810 of the National Electrical Code, ANSI/NFPA
70, providesinformationwith regard to proper groundingof the mast and
supporting structure, grounding of the lead-in wire to an antenna-discharge
unit, size of grounding conductors, location of antenna-discharge unit,
connectionto groundingelectrodes, and requirementsfor the grounding
electrode.
16.LIGHTNING- For added protection for this productduring a lightning
storm,or when It Is left unattendedand unused for long periods of time,
unplugIt from the wall outletand disconnectthe antennaor cable system.
This will prevent damage to the product due to lightning and power-line
surges.
17.POWER LINES - An outsideantennasystemshouldnot be locatedIn
the vicinityof overheadpower lines or other electriclight or power circuits,
or where It can fall Into such power lines or circuits. When Installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be fatal.
18.OVERLOADING - Do not overload wall outlets, extension cords,
electric shock.
19.OBJECT AND LIQUID ENTRY - Never push objectsof any kind
Into this product through openingsas they may touch dangerousvoltage
spill liquid of any kind on the product.
20.SERVICING - Do not attempt to service this product yourself as
opening or removing covers may expose you to dangerous voltage or
l.
21.DAMAGE REQUIRING SERVICE - Unplug this product from
following conditions:
a) W hen the power-supply cord or plug Is damaged.
b) If liquid has been spilled, or objects have fallen Into the product.
c) If the product has been exposed to rain or water.
d) I f the product does not operate normally by following the operating
Instructions,adjust only those controlsthat are covered by the operating
Instructions as an Improper adjustment of other controls may result In
restore the product to Its normal operation.
e) If the product has been dropped or damaged In any way.
f) When the product exhibits a distinct change In performance - this Indicates
a need for service.
FR
11
EN
10
22.
REPLACEMENT PARTS -
When replacementparts are required,
the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
23.
SAFETY CHECK -
Upon completionof any serviceor repairs to this
product,ask the servicetechnicianto perform safety checks to determine
that the product is in proper operating condition.
24.
WALL O R CEILING MOUNTING -
The product should be
mounted to a wall or ceiling only as recommended by the manufacturer.
25.
HEAT -
The product should be situated away from heat sources such
that produce heat.
Warning:
the party responsible for compliance could void the users' authority to operate
the equipment.
Manuel en français
Généralités
1 : Cordelette ajustable
2 : Bouton « < » : chanson précédente
3 : Bouton « > » : chanson suivante
4 : Voyant DEL
a) Chargement
Voyant DEL État du casque
Le voyant rouge est allumé Chargement
Le voyant rouge est éteint Chargement complet
b) En cours d’utilisation
Voyant DEL État du casque
Les voyants rouge et bleu clignotent alternativement Appariement
Le voyant bleu clignote toutes les 3 secondes Non-conversation
Le voyant bleu s'allume et s'éteint progressivement Conversation
5 : Bouton multifonction « » (MFB) : répondre, terminer, rejeter l'appel, pause et
lecture
6 : Bouton « - », appuyer brièvement ou longuement pour diminuer le volume
7 : Bouton « - », appuyer brièvement ou longuement pour augmenter le volume
8 : Port de charge
9 : Microphone intégré
1
8
9

10
11
FR
11
EN
10
22.
REPLACEMENT PARTS -
When replacementparts are required,
the manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
23.
SAFETY CHECK -
Upon completionof any serviceor repairs to this
product,ask the servicetechnicianto perform safety checks to determine
that the product is in proper operating condition.
24.
WALL O R CEILING MOUNTING -
The product should be
mounted to a wall or ceiling only as recommended by the manufacturer.
25.
HEAT -
The product should be situated away from heat sources such
that produce heat.
Warning:
the party responsible for compliance could void the users' authority to operate
the equipment.
Manuel en français
Généralités
1 : Cordelette ajustable
2 : Bouton « < » : chanson précédente
3 : Bouton « > » : chanson suivante
4 : Voyant DEL
a) Chargement
Voyant DEL État du casque
Le voyant rouge est allumé Chargement
Le voyant rouge est éteint Chargement complet
b) En cours d’utilisation
Voyant DEL État du casque
Les voyants rouge et bleu clignotent alternativement Appariement
Le voyant bleu clignote toutes les 3 secondes Non-conversation
Le voyant bleu s'allume et s'éteint progressivement Conversation
5 : Bouton multifonction « » (MFB) : répondre, terminer, rejeter l'appel, pause et
lecture
6 : Bouton « - », appuyer brièvement ou longuement pour diminuer le volume
7 : Bouton « - », appuyer brièvement ou longuement pour augmenter le volume
8 : Port de charge
9 : Microphone intégré
1
8
9

12
13
Enceinte Bluetooth à ventouse
pour la douche
SP230-BLACK

12
13
Spécications
Bluetooth : 3.0 +EDR
Fréquence sans l : 2,4 GHz
Puissance de l'enceinte : 3 W x 1
Alimentation électrique : CC 5 V - 100-120 mA
Batterie : 3,7 V 400 mAh au lithium
Durée de charge : environ 3 heures
Autonomie : environ 2 heures
Distance de transfert : 10 m
Lecture/ Pause
Suivant/ Augmenter
volume
Précédent/
Diminuer volume
Réponse appel/ n
d'appel
Mise en marche/
arrêt
Microphone
PDF created with pdfFactory trial version www.pdffactory.com

14
15
1. Appuyez longuement sur le bouton marche-arrêt pendant
3 secondes. Le voyant clignote alternativement en rouge et
bleu. L'enceinte passe en mode d'appariement.
2. Une fois que vous avez activé le Bluetooth sur votre
appareil, sélectionnez le nom de l'appareil « Sylvania » dans
la liste des appareils Bluetooth disponibles.
Si nécessaire, entrez le mot de passe « 0000 » pour
conrmer et naliser l'appariement.
3. Appuyez sur « Suivant/ Augmenter volume » ou sur «
Précédent/ Diminuer volume » pour sélectionner la piste
Enceinte
Port de charge
micro-USB
Ventouse

14
15
audio et régler de volume.
Si vous voulez mettre votre musique en pause, appuyez une
fois sur le bouton « Lecture/ Pause ».
4. Lorsque vous recevez un appel, appuyez une fois sur la
« Répondre/ Raccrocher » pour répondre au téléphone ;
appuyez de nouveau lorsque vous terminé la conversation
téléphonique.

16
17
FRFR
14 15
Charger le casque
Insérez le câble de chargement USB dans le port utilisation de PC.
Branchez le câble de chargement dans le port de chargement du casque.
Lorsque le voyant rouge est allumé, le casque est en cours de chargement.
Lorsque le voyant rouge est éteint, le casque est complètement chargé.
Reconnexion à un appareil Bluetooth
A) Connexion automatique
Lorsque le casque est allumé, il se connectera automatiquement au dernier
appareil connecté qui est le plus proche.
Lorsque le casque est en mode veille et n’est connecté à aucun appareil, appuyez
brièvement deux fois sur le bouton MFB pour qu’il se connecte automatiquement
au dernier appareil connecté.
Caractéristiques
Version Bluetooth V3.0+EDR
Prols Bluetooth HSP, HFP, A2DP, AVRCP
Batterie standard Batterie au Lithium-ion rechargeable de 300 mAh,
encastrée
Durée de lecture de
musique
10 heures max.
Autonomie en veille 250 heures
Temps de charge 3 heures
Temps de conversation 10 heures
Dimension 14,5*10*6 cm
Poids 112 g
Rayon d'action 10 mètres
Fréquence 2402MHz~2480MHz ISM Ban
Caractéristiques du
microphone
-42dB (0dB=1V/Pa, 1KHz)
Entrée CC 5V
Accessoires Manuel de l'utilisateur et câble USB
AVERTISSEMENT
Lire les Consignes de sécurité avant toute modication du volume.
Une utilisation sans risque dépend de la durée d'exposition et des niveaux de
volume.
L'exposition à un volume de 80 dB(A) doit être limitée à 40 heures par semaine.
L'exposition ne doit pas dépasser 5 heures/semaine à 89 dB (A).

16
17
FRFR
16 17

18
19
FRFR
16 17
FRFR
16 17

18
19
FRFR
16 17
FR
18

20
FR
18