Sylvania SP650 User manual

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL

1 2
8 9Power Charge Notes for the Bottle Cleaning 10
Notes
◆Please read this manual carefully before use.
◆Avoid the use of this speaker in the high-temperature and
high humidity environment.
◆Do not throw to avoid falling damage of the speaker.
◆Avoid self disassemble of speaker, or it will result in
the failure of warranty.
◆Please charge speaker with power adaptor output
rated voltage 5V.
◆Long time high volume playing is likely to cause hearing damage.
WATER BOTTLE
SPEAKER
1User Manual
3
USB charge cable
2
Notes Product Standard Accessories
Other Speaker Connection
Use a computer USB port / power
adapter torecharge the speaker.
When battery is low, 80% power
capacity can be recovered after
two hours fast charging and it will
take 3 hours to fully charge the
speaker.
Use a USB cable for
connection.
Connect speaker to notebook,
table PC, devices by using
USB cable.
6 7
5
SD
CARD
Enter SD Card Music
Playing Mode
Insert SD card with music files
into the SD slot,press and hold
the“Power”button to turn on
speaker, when speaker voices
out reminder“SD Card Mode”,
speaker will enter directly into
the" SD card music playback
mode".
Music data reading
Press power on/off button and hold
for 3-5 second, then prompt voice
for Bluetooth connection, blue light
flashing, bluetooth is ready for
connection.
Click the settings in bluetooth
devices, then search for device
list and find “SP650”, then click
for connection. Blue lightson and
speaker will beep,Bluetooth is
connected successful.
Device List
SP650
Device List
SP650
Bluetooth Connection
Notes:
1: SP650 Bluetooth Speaker can be connected to mobile
phone or tablets with a Bluetooth chip inside, and can be
paired with notebook, compatible with ios, Android and other
mainstream operating system.
2 :After first successful connection, restart the speaker, Bluetooth
will be automatically connected back again.
Exit SD Card Music
Playing Mode
Press power button for mode
shifting or pull out the SD card,
can exit SD card playing mode,
and shift to Bluetooth playing
mode.
Note: Support music format: MP3, WAV, WMA.
SD card music playing mode.
Music data reading
1: Under Speaker power on status, use the speaker USB
data cable in the package, plug it into the MICRO USB
socket of speaker, and then connect the cable to the
computer USB port, the speaker enters into data reading
mode. Now use the computer file management to store or
delete audio files in the SD card.
2: Read data by using special SD card reader.
Note: When clean the speaker bottle,
please separate bottle and bottom speaker
by counterclockwise rotation with a
little force. Clean bottle separately to
avoid part damage to the speaker.
3 4-1 4-2
Speaker Type
Speaker System
Bluetooth Version
Connection Method
Recharge Method
Battery Capacity
Rated Power
Product Size
Product Weight
Bottle Material
2 IN 1 Bottle Speaker
Dual drivers and dual passive bass radiators audio system
JS 3.0
Wireless Bluetooth Connection, SD Connectio n
DC5V-500mA USB power sources
350mAh
2.5W
Diameter 68 X H 245 mm
204g
Tritan(BPA Free) Made in USA
Technical Data
Technical Data
Power on / Off
Press and hold for 3-5 second to
boot speaker,press and hold for 3-5
second again to switch off speaker.
Press quickly for mode switch
Button Functions Button Functions
Volume Up / Next Song
Press quickly for next song, press
and hold to increase volume.
Volume Down / Last Song
Press quickly for last song,
pressand hold to decrease
volume.
Play/Panse
When music playing, press the button
to pause and play.
Insert SD Card
Speaker can play the
music in SD card.
Working LED indicators:
Power on: blue LED light flashes
quickly;Bluetooth Paired: blue
LED light flashes slowly;Charge
Status: green LED lights on ;
USB Charge Socket
Use a computer USB port / power
adapter to recharge speaker
RESET Function
Press “ RESET” to restart the speaker
WATER BOTTLE SPEAKER
USER MANUAL
2 IN 1
BLUETOOTH SPEAKER
USER MANUAL