Sylvania SBT1100 User manual

Introducon
TheSBT1100Bluetooth FM Transmier ulizes
Bluetooth 3.0 technology and equips three USB
ports: one for USB music file playing; two
designed for charging (IOS and Android devices).
Moreover, it supports TF card and AUX Input.
SBT1100provides mul-soluons for your
hands-free driving and in-car stereo streaming.
Smart phone can be connected to SBT1100
through Bluetooth and stream through car FM
system.
Product Diagram
① Display screen ⑦ Answer the call/pause
② Frequency (channel) down Next /volume up
③ Mul-funcon buon ⑧ USB port(for reading file)
④ Frequency (channel) up ⑨ TF card slot
⑤ Hang up/power off ⑩ Aux input /Aux output
Previous /volume down ⑪ Charger USB1
⑥ Microphone ⑫ Charger USB2
Car FM Transmitter
User Guide
BF18
SBT1100
SYLVANIA
FCC NOTICE:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
This device complies with part 15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference
that may cause undesired operation.
.
To assure continued operation, follow the attached installation instructions and
use only shield cables when connecting to other devices. Changes or
modifications not expressly approved by the party responsible for compliance
could void the user's authority to operate the equipment.
2ANH7-SBT1100

Specificaons
FM Frequency Range: 88.1~107.9MHz
Frequency Stability: ±10ppml
Product Input: 12-24V
USB Charger Output: 5V/3A (total)
TF Card Slot and USB Reader Support
Music Format: MP3, WMA
TF Card and USB Flash Drive (Max
capacity): 32GB
FM Operang Distance: about 5M
Operaon Instrucon
1. FM Transmier Set-up
1). Plug this device into your car
cigaree lighter port, it will turn on
automacally;
2). Tune on radio to a vacant FM
frequency, then adjus his device to
sync the same frequency
(via”CH+”buon④
and ”CH-”buon②).
(please find a leas nterfered vacant
frequency, in order to achieve least
noise upon sync)
2. TF Card and USB Flash Drive
Insert your TF card into TF card s l o t ⑨
or insert USB flash drive into USB
reader port ⑧，it will play your MP3/
WMA audio automacally.
3. Bluetooth Phone Set-up
Using Bluetooth for the firs me, you need to
pair your mobile phone with this unit. Acvate
your mobile phone’s Bluetooth funcon, then
detect and pair this unit (SBT1100).
4. Bluetooth calling
In the music playing mode, when there is an
incoming call, this unit will automacally switch
to the telephone mode.
1). Please press the ”Answer the Call bu o n ⑦”
to answer incoming call.
2). Please press the ”hang up bu o n ⑤”
to hang up a call.
3). Please press the ”Answer the Call buon⑦”
twice to dial the last number.
5. AUX Input / AUX Output
Aux Input: Use the audio cable (not included) to
connect
MP3/MP4
players
or
other
external
device and the other end connect to the "Aux
input / Aux output⑩".
Aux Output: Use the audio cable (not included)
to connect external speaker's Aux In port and the
other end connect to the "Aux input / Aux output
⑩", this unit can be used as a card reader.
6. Charge Funcon
There are dual USB Charging ports⑪ and⑫, one
for 5V 2.1A and the other for 5V 1A. The different
current is for different devices charging. USB Port
⑧is not intended for charging purpose.
7. Playing Mode Switch
While playing audio, short press M/▶l▏buon③,
you can pause or play again. Long press M/▶l▏
buon③, you can switch audios source from
Bluetooth, TF card, USB flash drive or Aux input.
Quick Guide
Operaon
Guide
On FM transmier
1. Set
Frequency Press”CH+”buon④: increase the frequency; Press”CH-”buon ②:
decrease the frequency.
2. Choose audio Short pr e s s VOL+/▶▶▏buon⑦: play the
next audio.
Short press |◀◀/VOL- buon ⑤: play the
previous audio.
3. Play and
pause the audio Short press M/▶l▏buon③
4. Answer/hang
up a call Press answer the call buo n ⑦/ hang up buon⑤
5. Adjus he
volume
Long press VOL+/▶▶▏buon⑦: volume up
Long press|◀◀/VOL- buon ②: volume
down
6. Reject a call Press hang up b u  o n ⑤
7. Private call
answer Long press answer the call bu o n ⑦for three seconds, you can answer the call
privately, instead of via the Bluetooth.
Read before use
1. The transmier will connec o the pre-set
phone automacally when turnsit on (Keep
mobile phone’s Bluetooth acve).
2. For the best audio quality, find a least
interfered frequency and adjus o find an ideal
volume for the FM transmier (Volume 15 is
usually good).
3. I he noise is too loud, please try other
vacancy FM frequency or use the Aux-In port
4. The transmier will power off automacally
without any operaon in 5 minutes (without
flash drive or TF card in), you need to long press
the mul-funcon buon for 2 seconds to turn it
on again.
5. Never disassemble the product, which will void
its warranty and cause safety concern.