SYLVI FRIST User manual

www.sylvi.in
Analog + Digital
Watch Instruction Manual
(SYLVI FRIST)
S YLVI
RACE W ITH TIM E

S Y L V I
R A C E W I T H T I M E
Instruction Manual
www.sylvi.in
02
Index
1. Brief Introduction 03
No. Subject Page
3. Battery Instructions 06
2. Operation Guide 04
5. Water Resistant 07
7. Claim Warranty 09
4. Strap Instructions 06
6. Warranty Instructions 08
8. Contact Us 09
•How to set Time 04
•How to set Alarm 05
•How to turn On/Off Alarm 05
•How to turn On/Off Chime mode 05
•How to set Stopwatch 05
•How to use Lap Timing 05

Alarm
Day
S Y L V I
R A C E W I T H T I M E
Instruction Manual
www.sylvi.in
03
A
D
B C
A
Light Button
B
Mode Change
C
Reset Button
D
Start/Stop Button
Crown
Brief Introduction
Watch Dial
- Diameter : 34mm
Strap
- Width : 22mm
- Thickness : 2.97mm
Watch Case
- Height : 60mm
- Diameter : 52mm
- Thickness : 18.56mm
Water Resistant
3 ATM
Time
(HH:MM:SS)
Date
Time
(HH:MM)

S Y L V I
R A C E W I T H T I M E
Instruction Manual
www.sylvi.in
04
Operation Instructions
How to Set Time:-
Analog Watch
1. Pull out the crown to position B.
2. Turn crown either way to correct time.
3. Fix your correct time.
4. Push in the crown to the position A (Normal).
Digital Watch
In normal mode, press B three times. You will enter into a
setting mode where seconds will be flashing. Press D to zero.
Press C, the “Hours” will flash. Press D for adjusting “Hours”
Press C, the “Minutes” will flash. Press D to adjust “Minutes”
Press C, the “Month” will flash. Press D to adjust “Month”
Press C, the “Date” will flash. Press D to adjust “Date”
Press C, the “week” will flash. Press D to adjust “Day”
Press the B key to exit.
- Analog Watch
- Digital Watch
AB
A D
B C

S Y L V I
R A C E W I T H T I M E
Instruction Manual
www.sylvi.in
05
A D
D
B
B
C
Alarm is ON else OFF.
In normal mode, Press B to enter Alarm mode and
press C, “hours” will flash
Press D to adjust the hour for your alarm. Pay attention to
am/pm, 12H display A/P means AM/PM,
24H display “H” means HOUR
Press C, minutes will flash. Press D to adjust minutes
for your alarm
Press the B key to exit.
How to Set Alarm:-
How to Set Stopwatch:-
How to use Lap Timing:-
In normal mode, Press B twice to enter Stopwatch mode
Press D to “Start/Stop”.
Press D to start stopwatch
Press C to pause stopwatch
How to turn On/Off Alarm:-
In normal mode press B to enter Alarm mode
Press D once,If the Bell sign ( ) on the display is visible,
Chime
mode
Alarm
(HH:MM)
D
B
How to turn On/Off Chime mode
In normal mode press B to enter Alarm mode and
If the sign ( ) on the display is visible,
Chime is ON else OFF.
D twice time

S Y L V I
R A C E W I T H T I M E
Instruction Manual
www.sylvi.in
06
Strap Instructions
- The strap with 13.5cm at tail side and 8cm at buckle side.
- The strap with 28mm width.
- A replacement belt of lug size 28mm is suggested for this watch.
Battery Instructions
A CR2025 batery cell for Digital and LR626 for Analog display.
Battery For Digital
No.: CR2025
Battery For Analog
No.: LR626
Width :28mm
13.5cm
8cm

S Y L V I
R A C E W I T H T I M E
Instruction Manual
www.sylvi.in
07
Water Resistant
For information about the water-resistant rating of Sports, Casual, Chronograph, and Slim
watches please refer to page 3.
The water resistant rating provides guidelines for appropriate water-related exposure to avoid damage
to internal watch components. Please see the chart for recommended usage guidelines.
To ensure water does not enter the watch and cause damage to it,
please follow the instructions listed below:
• Do not adjust the crown while the timepiece is in contact with water.
• Ensure the crown is in the closed position before contact with water. For timepieces with
screw-down crowns, ensure the crown is completely tightened before contact with water.
• For timepieces with pusher-enabled functionality, do not engage the function underwater.
• Exposure to the extreme atmosphere is not recommended (i.e. hot water, saunas, or steam rooms).
• Avoid exposure to water moving with force (i.e. water running from a faucet, ocean waves, or waterfalls).
•
• Avoid long exposure to saltwater. After contact with salt water, rinse the watch under tap water
if rated 5ATM or higher and wipe dry with a soft cloth.
Recommendations For Water-Related Use
Indication
(Hand Washing)
SPLASH RESISTANT
(Swimming)
SUBMERSIBLE
(Snorkeling)
SHALLOW DIVING
(Not Deep Sea)
SCUBA DIVING
None
3 ATM • 30 Meters
5 ATM • 50 Meters
20 ATM • 200 Meters
10 ATM • 100 Meters

S Y L V I
R A C E W I T H T I M E
Instruction Manual
www.sylvi.in
08
Warranty Instructions
Your watch is warranted for six (6) months from the original date of purchase under the terms and conditions
of the warranty. The warranty covers manufacturing defects, i.e. the watch movement, hands, and dial only.
The covered components will be repaired or the watch will be replaced free of component and labor charges
if it proves to be defective in material or workmanship under normal use.
- In case of replacement, we cannot guarantee that you will receive the same model watch. If your model is
not available, a watch of equal value and similar style will be provided.
This warranty does not cover:
• Any defect in materials and workmanship of battery, case, crystal, button, crown, strap, or bracelet;
including plating on the case and/or bracelet.
• Damage resulting from improper handling, lack of care, accidents, normal wear and tear or aging.
• Water damage if care instructions for the product's water resistance levels (as per the product specification)
were not followed.
• Products that are not purchased from an authorized retailer.
•
• This warranty is void if the watch has been damaged by accident, negligence of persons other than
authorized sales or service agents, unauthorized service, or other factors not due to defects in materials
and workmanship. This warranty is void if the serial number or product date codes or other tracking marks
have been removed, altered, or obliterated.
Get Additional Warranty
https://sylvi.in/warranty-registration
Click Here to Open
or

S Y L V I
R A C E W I T H T I M E
Instruction Manual
www.sylvi.in
09
How to Claim Warranty?
How to reach us?
Step 1:
Contact customer care and report your problem. An RMA ID will be generated
(Without RMA ID, warranty cannot be claimed)
Step 2:
The product will have to be sent to service center including the following information.
RMA ID - Given by customer care executive
Name
Full address
Daytime contact telephone number
Email address
Where your item was purchased from
M
Model reference of the item (Found on the back of your watch)
Full description of the work required
A copy of your proof of purchase
For any service-related inquiries and feedback, call our number
[phone] Monday to Saturday, 10.00 am to 7.00 pm.
(closed on National and Festival holidays).
If you are unhappy for any reason, please mail us at [e-mail].
We promise to reply by the next working day.