Symbol PSM20i User manual

2
Patents
This product is covered by one or more of the following U.S. and foreign Patents:
U.S. Patent No. 4,593,186; 4,603,262; 4,607,156; 4,652,750; 4,673,805; 4,736,095;
4,758,717; 4,760,248; 4,806,742; 4,816,660; 4,845,350; 4,896,026; 4,897,532;4,923,281; 4,933,538;
4,992,717; 5,015,833; 5,017,765; 5,021,641; 5,029,183; 5,047,617; 5,103,461; 5,113,445; 5,130,520;
5,140,144; 5,142,550; 5,149,950; 5,157,687; 5,168,148; 5,168,149; 5,180,904;5,216,232; 5,229,591;
5,230,088; 5,235,167; 5,243,655; 5,247,162; 5,250,791; 5,250,792; 5,260,553;5,262,627; 5,262,628;
5,266,787; 5,278,398; 5,280,162; 5,280,163; 5,280,164; 5,280,498; 5,304,786;5,304,788; 5,306,900;
5,324,924; 5,337,361; 5,367,151; 5,373,148; 5,378,882; 5,396,053; 5,396,055;5,399,846; 5,408,081;
5,410,139; 5,410,140; 5,412,198; 5,418,812; 5,420,411; 5,436,440; 5,444,231; 5,449,891; 5,449,893;
5,468,949; 5,471,042; 5,478,998; 5,479,000; 5,479,002; 5,479,441; 5,504,322;5,519,577; 5,528,621;
5,532,469; 5,543,610; 5,545,889; 5,552,592; 5,557,093; 5,578,810; 5,581,070;5,589,679; 5,589,680;
5,608,202; 5,612,531; 5,619,028; 5,627,359; 5,637,852; 5,664,229; 5,668,803;5,675,139; 5,693,929;
5,698,835; 5,705,800; 5,714,746; 5,723,851; 5,734,152; 5,734,153; 5,742,043;5,745,794; 5,754,587;
5,762,516; 5,763,863; 5,767,500; 5,789,728; 5,789,731; 5,808,287; 5,811,785; 5,811,787; 5,815,811;
5,821,519; 5,821,520; 5,823,812; 5,828,050; 5,848,064; 5,850,078; 5,861,615;5,874,720; 5,875,415;
5,900,617; 5,902,989; 5,907,146; 5,912,450; 5,914,478; 5,917,173; 5,920,059;5,923,025; 5,929,420;
5,945,658; 5,945,659; 5,946,194; 5,959,285; 6,002,918; 6,021,947; 6,029,894;6,031,830; 6,036,098;
6,047,892; 6,050,491; 6,053,413; 6,056,200; 6,065,678; 6,067,297; 6,082,621;6,084,528; 6,088,482;
6,092,725; 6,101,483; 6,102,293; 6,104,620; 6,114,712; 6,115,678; 6,119,944; 6,123,265; 6,131,814;
6,138,180; 6,142,379; 6,172,478; 6,176,428; 6,178,426; 6,186,400; 6,188,681;6,209,788; 6,209,789;
6,216,951; 6,220,514; 6,243,447; 6,244,513; 6,247,647; 6,308,061; 6,250,551;6,295,031; 6,308,061;
6,308,892; 6,321,990; 6,328,213; 6,330,244; 6,336,587; 6,340,114; 6,340,115; 6,340,119; 6,348,773;
6,380,949; 6,394,355; D305,885; D341,584; D344,501; D359,483; D362,453; D363,700; D363,918;
D370,478; D383,124; D391,250;
D405,077; D406,581; D414,171; D414,172; D418,500; D419,548; D423,468; D424,035;
D430,158; D430,159; D431,562; D436,104.
Invention No. 55,358; 62,539; 69,060; 69,187, NI-068564 (Taiwan); No. 1,601,796; 1,907,875;
1,955,269 (Japan); European Patent 367,299; 414,281; 367,300; 367,298; UK 2,072,832; France 81/
03938; Italy 1,138,713
rev. 06/02

3
©2002 SYMBOL TECHNOLOGIES, INC. All rights reserved.
Symbol reserves the right to make changes to any product to improve reliability, function, or design.
Symbol does not assume any product liability arising out of, or in connection with, the application or
use of any product, circuit, or application described herein.
No license is granted, either expressly or by implication, estoppel, or otherwise under any patent right
or patent, covering or relating to any combination, system, apparatus, machine, material, method, or
process in which Symbol products might be used. An implied license exists only for equipment,
circuits, and subsystems contained in Symbol products.
Symbol and the Symbol logo are registered trademarks of Symbol Technologies, Inc. Other product
names mentioned in this manual may be trademarks or registered trademarks of their respective
companies and are hereby acknowledged.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
The product packaged herein is manufactured by Symbol Technologies, Inc. under license from
Motorola, Inc. and is intended for use with the following Motorola phone products: i85sTM, i50sxTM,
i55srTM.
MOTOROLA, the Stylized M Logo are registered in the US Patent & Trademark Office. All other
product or service names are the property of their respective owners. © Motorola, Inc. 2002.
ThisMotorola ApprovedAccessory hasbeen manufactured toSymbol'sQualitystandards andto meet
the performance requirements for compatibility to your Motorola Wireless Telephone. This Symbol
Accessory is covered by a limited twelve-month warranty. See inside for complete details on this
warranty.
This Motorola Approved product may not be marketed, sold or shipped outside of the following
countries: United States (including Guam), Canada, Mexico, Brazil, Argentina, Peru, Colombia, South
Korea, Japan, Singapore, Philippines, China, Israel, Panama.

4
Ergonomic Recommendations
Caution: In order to avoid or minimize the potential risk of ergonomic injury follow the
recommendations below. Consult with your local Health & Safety Manager to ensure that you are
adhering to your company’s safety programs to prevent employee injury.
• Reduce or eliminate repetitive motion
• Maintain a natural position
• Reduce or eliminate excessive force
• Keep objects that are used frequently within easy reach
• Perform tasks at correct heights
• Reduce or eliminate vibration
• Reduce or eliminate direct pressure
• Provide adjustable workstations
• Provide adequate clearance
• Provide a suitable working environment
• Improve work procedures.
Regulatory Information
All Symbol devices are designed to be compliant with rules and regulations in locations they are sold
and will be labeled as required.
Any changes or modifications to Symbol Technologies equipment, not expressly approved by Symbol
Technologies, could void the user's authority to operate the equipment.
FCC RF Exposure Guidelines
The FCC has granted an Equipment Authorization for this scanner with the appropriate Iden model
phones with all reported SAR levels evaluated as in compliance with the FCC RF emission guidelines.
SAR information on these model phones is on file with the FCC and can be found under the Display
Grant section of http://www.fcc.gov/oet/fccid.

5
Radio Frequency Interference Requirements
Note: This equipment has been tested and found to complywith the limits for a
Class B digital device, pursuant to Part 15 of the FCC rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However there isno guarantee
that interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which canbe determined by turning the equipment offand
on, the user is encouraged to tryto correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that to which the receiver is con-
nected
• Consult the dealer or an experienced radio/TV technician for help.
Radio Frequency Interference Requirements - Canada
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Laser Devices
Symbol devices using lasers comply with US 21CFR1040.10, and IEC825-1:1993, EN60825-
1:1994+A11:1996. The laser classification is marked on one of the labels on the device.
Class 1 Laser devices are not considered to be hazardous when used for their intended purpose. The
following statement is required to comply with US and international regulations:
Caution: Use of controls,adjustments or performance ofprocedures other than those specifiedherein
may result in hazardous laser light exposure.
Class 2 laser scanners use a low power, visible light diode. As with any very bright light source, such
as the sun, the user should avoid staring directly into the light beam. Momentary exposure to a Class
2 laser is not known to be harmful.

6
Scanner Labeling
In accordance with Clause 5, IEC 825 and EN60825, the following information is provided to the user:
ENGLISH PORTUGUESE / PORTUGUÊS
CLASS 1 CLASS 1 LASER PRODUCT CLASSE 1 PRODUTO LASER DA CLASSE 1
CLASS 2 LASER LIGHT CLASSE 2 LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO
DO NOT STARE INTO BEAM PRODUTO LASER DA CLASSE 2
CLASS 2 LASER PRODUCT
FRENCH / FRANÇAIS
CLASSE 1 PRODUIT LASER DE CLASSE 1
CLASSE 2 LUMIERE LASER
NE PAS REGARDER LE RAYON FIXEMENT
PRODUIT LASER DE CLASSE 2
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL  LASER DE
CLASSE 1
LASER LIGHT- DO NOT STARE INTO BEAM
630-680nm LASER 1.0 mW MAX OUTPUT
CLASS II LASER PRODUCT
CAUTION
(on the back of the module)
AVOID EXPOSURE- LASER LIGHT IS EMITTED FROM THIS APERTURE.
EVITER TOUTE EXPOSITION-LUMIÈRE LASER ÉMIS PAR CETTE OUVERTURE

7
©2002 SYMBOL TECHNOLOGIES, INC. Tous droits réservés.
Symbol se réserve le droit de modifierles produits afin d'en améliorer la fiabilité, lefonctionnement ou
la conception.
Symbol décline toute responsabilité liée au produit, découlant de l'utilisation du produit, des circuits ou
de l'application ici décrite.
Aucun droit de brevet ou brevet quelconque n'est accordé sous licence, expresse ou tacite, en
préclusion ou autrement, couvrant ou associé à toute combinaison, système, appareil, machine,
matériel, méthode ou processus dans lequel les produits Symbol peuvent être utilisés. La licence
tacite ne concerne que le matériel, les circuits et les sous-systèmes dont sont équipés les produits
Symbol.
Symbol et le logo Symbol sont des marques déposées de Symbol Technologies, Inc. Les noms des
autres produits cités dans le présent manuel sont des marques ou marques déposées appartenant à
leur propriétaire respectif, ce dont il est ici pris acte.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, N.Y. 11742-1300
http://www.symbol.com
Le produit emballé ci-inclus est fabriqué par Symbol Technologies, Inc.sous licence de Motorola, Inc. et
est conçu pour être utilisé avec les produits de téléphonie Motorola suivants : i85sTM,i50sxTM,i55srTM.
MOTOROLA, le logo stylisé M sont déposés auprès du bureau américain des brevets et des marques
commerciales. Tous les noms des autres produits ou services appartiennent à leur propriétaire
respectif. © Motorola, Inc. 2002.
Cet accessoire approuvé par Motorolaa été fabriqué conformément aux normes de qualité deSymbol
et de façon àsatisfaire aux exigences deperformance à des fins decompatibilité avec votretéléphone
sans fil Motorola. Cet accessoire Symbol est couvert par une garantie limitée de douze mois. Pour
plus d'informations à propos de cette garantie, voir à l'intérieur.
Ce produit approuvé par Motorola ne peut pas être commercialisé, vendu ou expédié à l'extérieur des
pays suivants : États-Unis (y compris Guam), Canada, Mexique, Brésil, Argentine, Pérou, Colombie,
Corée du Sud, Japon, Singapour, Philippines, Chine, Israel, Panama.

8
Recommandations d’ergonomie
Attention : Dans le butd'éviter ou de minimiser lesrisques éventuels de blessure ergonomique, suivez
les recommandations suivantes. Consultez votre directeur local de la santé et sécurité pour vous
assurer de respecter les programmes de sécurité en vigueur dans votre compagnie pour éviter des
blessures au travail.
• Réduire ou éliminer les mouvements répétitifs
• Garder une position naturelle
• Réduire ou éliminer toute force excessive
• Garder à portée de la main les objets fréquemment utilisés
• Effectuer vos tâches aux hauteurs appropriées
• Réduire ou éliminer la vibration
• Réduire ou éliminer la pression directe
• Fournir des stations de travail ajustables
• Fournir un dégagement suffisant
• Fournir un environnement de travail adéquat
• Améliorer les procédures de travail.
Information réglementaire
Tous les appareils Symbol sont conçus pour être conformes aux règles et règlements en vigueur aux
endroits où ils sont vendus et sont étiquetés tels que requis.
Tout changement ou toute modification d'un produit Symbol Technologies, non autorisé de façon
expresse par Symbol Technologies, risque d'annuler l'autorité de l'utilisateur à faire fonctionner le
matériel.
Directives d'exposition à la radiofréquence de la FCC
La FCC a accordé une autorisation de matériel pour ce scanneur avec les téléphones de modèle Iden
appropriés à tous les niveaux SAR rapportés évalués comme étant conformes aux directives
d'émission de radiofréquence de la FCC. Les informations SAR sur ces modèles de téléphone sont
disponibles auprès de la FCC, dans la section Display Grant de http://www.fcc.gov/oet/fccid.

9
Exigences face au brouillage par radiofréquence
Note : Ce matériel a été testé et reconnu conforme aux limites établies pour un
appareil numérique dela classe B, conformémentà la Partie 15des règlements
de la FCC. Ces limites sont conçues pour offrir une protection raisonnable
contre le brouillage nuisible dans une installation de type résidentiel. Ce
matériel génère, utilise et peut émettre de l'énergie de radiofréquence et, s'il
n'est pas installé et utilisé conformément aux instructions, peut entraîner un brouillage nuisible aux
communications radio. Cependant, il n'est pas évident qu'un brouillage va se produire dans une
installation donnée. Si ce matériel causeun brouillage nuisible à la réception de radio oude télévision,
pouvant être déterminé en éteignant puisen rallumant le matériel, l'utilisateur peut essayer de corriger
ce problème de l'une des façons suivantes :
• Réorienter ou déplacer l'antenne de réception
• Augmenter l'espace séparant le matériel et le récepteur
• Connecter le matériel à une prise d'un circuit différent de celui auquel le récepteur est connecté
• Consulter le revendeur ou un technicien radio/TV d'expérience pour obtenir de l'aide.
Exigences face au brouillage par radiofréquence - Canada
Cet appareil numérique de classe B est conforme à la norme canadienne ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Appareils à laser
Les appareils Symbol à laser sont conformes aux normes US 21CFR1040.10 et IEC825-1:1993,
EN60825-1:1994+A11:1996. La classification à laser est indiquée sur l'une des étiquettes apposées
sur l'appareil.
Les appareils à laser de la classe 1 ne sont pas considérés comme étant dangereux lorsqu'ils sont
utilisés aux fins prévues. La déclaration suivante est requise pour être conforme aux règlements
américains et internationaux :
Attention : L'utilisation de commandes, d'ajustements ou de performance de procédures autres que
ceux précisés ci-inclus peut entraîner une exposition dangereuse à la lumière laser.
Les scanneurs à laser de la classe 2 utilisent une diode lumineuse visible à faible puissance. Comme
dans le cas de toute source de lumière très vive, telle le soleil, l'utilisateur doit éviter de fixer
directement le faisceau de lumière. Une exposition momentanée à un laser de la classe 2 n'est pas
reconnue comme étant nocive.

10
Étiquetage du scanneur
Conformément à la clause 5, IEC 825 et EN60825, les informations suivantes sont fournies à
l'utilisateur :
ENGLISH PORTUGUESE / PORTUGUÊS
CLASS 1 CLASS 1 LASER PRODUCT CLASSE 1 PRODUTO LASER DA CLASSE 1
CLASS 2 LASER LIGHT CLASSE 2 LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO
DO NOT STARE INTO BEAM PRODUTO LASER DA CLASSE 2
CLASS 2 LASER PRODUCT
FRENCH / FRANÇAIS
CLASSE 1 PRODUIT LASER DE CLASSE 1
CLASSE 2 LUMIERE LASER
NE PAS REGARDER LE RAYON FIXEMENT
PRODUIT LASER DE CLASSE 2
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL  LASER DE
CLASSE 1
LASER LIGHT- DO NOT STARE INTO BEAM
630-680nm LASER 1.0 mW MAX OUTPUT
CLASS II LASER PRODUCT
CAUTION
(à l'arrière du module)
AVOID EXPOSURE- LASER LIGHT IS EMITTED FROM THIS APERTURE.
EVITER TOUTE EXPOSITION-LUMIÈRE LASER ÉMIS PAR CETTE OUVERTURE

11
©2002 SYMBOL TECHNOLOGIES, INC. Todos os direitos reservados.
A Symbol reserva-se o direito de efetuar alterações em qualquer produto para aprimorar a
confiabilidade, o funcionamento ou o design.
A Symbol não assume nenhuma responsabilidade sobre o produto resultante ou vinculada à
aplicação ou utilização de qualquer produto, circuito ou aplicação aqui descrita.
Nenhuma licença é outorgada, explicitamente oupor conseqüência, preclusão ou de outra forma sob
nenhum direito de patente ou patente, cobrindo ou relacionada a nenhuma combinação, sistema,
aparelho, máquina, material, método ou processo na qual os produtos da Symbol possam ser
utilizados. Existe somente uma licença implícita para equipamentos, circuitos e subsistemas contidos
nos produtos Symbol.
Symbol e o logotipo Symbol são marcas registradas da Symbol Technologies, Inc. Outros nomes de
produtos mencionados neste manual podem ser marcas comerciais ou marcas registradas de suas
respectivas companhias e são aqui reconhecidos.
Symbol Technologies, Inc.
One Symbol Plaza
Holtsville, NY 11742-1300
http://www.symbol.com
O produto contido nesta embalagem foi fabricado pela Symbol Technologies, Inc. sob licença da
Motorola, Inc. e destina-se a utilização com os seguintes produtos telefônicos da Motorola: i85s TM,
i50sx TM,i55sr TM.
MOTOROLA e o logotipo M estilizado são registrados no US Patent & Trademark Office. Todos os
demais nomes de produtos ou serviços pertencem a seus respectivos proprietários. © Motorola, Inc.
2002.
Este Acessório Aprovado Motorola foi fabricado de acordo com os padrões de qualidade da Symbol
e atendem os requisitos de desempenho para compatibilidade com o telefone sem fio Motorola. Este
acessório da Symbol é coberto por uma garantia limitada de doze meses. Veja o interior para obter
detalhes completos sobre essa garantia.
Este produto aprovado pela Motorola pode não ser comercializado, vendido ou transportado fora dos
seguintes países: EUA (incluindo Guam), Canadá, México, Brasil, Argentina, Peru, Colômbia, Coréia
do Sul, Japão, Cingapura, Filipinas, China, Israel, Panamá.

12
Recomendações ergonômicas
Cuidado: Para evitar ou minimizar o risco potencial de ferimentos devido à ergonomia, siga as
recomendações abaixo. Consulte o gerente local de saúde e segurança para certificar-se de cumprir
os programas de segurança da companhia para prevenção de acidentes de trabalho.
• Reduza ou elimine a movimentação repetitiva
• Mantenha uma posição natural
• Reduza ou elimine a força excessiva
• Mantenha os objetos utilizados com freqüência ao alcance com facilidade
• Execute tarefas a uma altura correta
• Reduza ou elimine vibrações
• Reduza ou elimine a pressão direta
• Disponha de estações de trabalho ajustáveis
• Disponha de espaço livre adequado
• Disponha de ambiente de trabalho adequado
• Melhore os procedimentos de trabalho.
Informações sobre normas
Todos os dispositivos da Symbol são projetados para cumprir com as normas e regulamentações nos
locais em que são vendidos e são etiquetados conforme as exigências.
Quaisquer alterações ou modificações nos equipamentos da Symbol Technologies que não sejam
autorizadas expressamente pela Symbol Technologies poderão invalidar a autoridade do usuário em
operar os equipamentos.
Diretrizes de exposição a RF da FCC (EUA)
A FCC outorgou uma Autorização de Equipamento para este leitor com os telefones modelo Iden
apropriados com todos os níveis de SAR informados avaliados de acordo com as diretrizes de
emissão de RF da FCC. Asinformações sobre a taxa de absorção específica (SAR,specific absortion
rate) sobre esses modelos de telefone foram registrados junto à FCC e podem ser encontradas na
seção Display Grant (exibir concessão) do site http://www.fcc.gov/oet/fccid.

13
Requisitos de interferência de radiofreqüência
Nota: Este equipamento foi testado e determinou-se sua conformidade com os
limites para um dispositivo digital de Classe B, de acordo com a Parte 15 das
normas da FCC. Esses limites são concebidos para oferecer uma proteção
razoável contra interferência nociva em uma instalação residencial. Este
equipamento gera, utiliza e pode irradiar energia de freqüência de rádio e, se
não for instalado e utilizado de acordo com as instruções, poderá causar interferência nociva nas
comunicações de rádio. Porém, não há garantia de que não ocorrerá interferência em uma instalação
específica. Se este equipamento causar interferência nociva na recepção de rádio outelevisão, o que
poderá ser determinado pelo desligamento e religação do equipamento, o usuário é aconselhado a
tentar corrigir a interferência através de uma ou mais das seguintes medidas:
• Reorientar ou reposicionar a antena receptora
• Aumentar a separação entre o equipamento e o receptor
• Conectar o equipamento em uma tomada de um circuito diferente daquele no qual o receptor
está conectado
• Consultar o revendedor ou um técnico de rádio/TV experiente para obter ajuda.
Requisitos de interferência de freqüência de rádio - Canadá
Este aparelho digital de Classe B está em conformidade com a norma canadense ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Dispositivos de laser
Os dispositivos da Symbol que utilizam laser estão em conformidade com as normas US
21CFR1040.10 e IEC825-1:1993, EN60825-1:1994+A11:1996. A classificação do laser é marcada
em uma das etiquetas no dispositivo.
Os dispositivos de laser de Classe 1 não são considerados perigosos quando utilizados de acordo
com sua finalidade projetada. A declaração a seguir é necessária para cumprir com as normas
internacionais e dos EUA:
Cuidado: A utilização de controles, ajustes ou desempenho de procedimentos que não aqueles aqui
especificados poderão resultar em exposição perigosa à luz de laser.
Os leitores a laser de Classe 2 utilizam um diodo de luz visível de baixa potência. Da mesma forma
que ocorre com uma fonte de luz muito forte, como o sol, o usuário deverá evitar olhar diretamente
para o feixe de luz. Uma exposição passageira a um laser de Classe 2 não é reconhecida como
nociva.

14
Etiquetagem do leitor
De acordo com a Cláusula 5, das normas IEC 825 e EN60825, são fornecidas as seguintes informações ao usuário:
ENGLISH PORTUGUESE / PORTUGUÊS
CLASS 1 CLASS 1 LASER PRODUCT CLASSE 1 PRODUTO LASER DA CLASSE 1
CLASS 2 LASER LIGHT CLASSE 2 LUZ DE LASER NÃO FIXAR O RAIO LUMINOSO
DO NOT STARE INTO BEAM PRODUTO LASER DA CLASSE 2
CLASS 2 LASER PRODUCT
FRENCH / FRANÇAIS
CLASSE 1 PRODUIT LASER DE CLASSE 1
CLASSE 2 LUMIERE LASER
NE PAS REGARDER LE RAYON FIXEMENT
PRODUIT LASER DE CLASSE 2
CLASS 1 LASER PRODUCT
LASER KLASSE 1
APPAREIL  LASER DE
CLASSE 1
LASER LIGHT- DO NOT STARE INTO BEAM
630-680nm LASER 1.0 mW MAX OUTPUT
CLASS II LASER PRODUCT
CAUTION
(na parte traseira do módulo)
AVOID EXPOSURE- LASER LIGHT IS EMITTED FROM THIS APERTURE.
EVITER TOUTE EXPOSITION-LUMIÈRE LASER ÉMIS PAR CETTE OUVERTURE

15

Warranty
(A) Seller’s hardware Products are warranted against defects in workmanship and materials for a period
of twelve (12) months from the date of shipment, provided the Product remains unmodified and is
operated under normal and proper conditions. Warranty provisions and durations on software, integrated
installed systems, Product modified or designed to meet specific customer specifications ("Custom
Products"), remanufactured products, and reconditioned or upgraded products, shall be as provided in
the applicable Product specification in effect at the time of purchase or in the accompanying software
license. (B) Products may be serviced or manufactured with parts, components, or subassemblies that
originate from returned products and that have been tested as meeting applicable specifications for
equivalent new material and Products. The sole obligation of Seller for defective hardware Products is
limited to repair or replacement (at Seller’s option) on a "return to service depot" basis with prior Seller
authorization. Shipment to and from Seller will be at Seller’s expense, unless no defect is found. No
charge will be made to Buyer for replacement parts for warranty repairs. Seller is not responsible for any
damage to or loss of any software programs, data or removable data storage media, or the restoration or
reinstallation of any software programs or data other than the software, if any, installed by Seller during
manufacture of the Product. The aforementioned provisions do not extend the original warranty period of
any Product that had either been repaired or replaced by Seller. (C) The above warranty provisions shall
not apply to any Product (i) which has been repaired, tampered with, altered or modified, except by
Seller’sauthorizedservicepersonnel;(ii)in whichthedefects ordamage tothe Productresult fromnormal
wear and tear, misuse, negligence, improper storage, water or other liquids, battery leakage or failure to
perform operator handling and scheduled maintenance instructions supplied by Seller; (iii) which has
been subjected to unusual physical or electrical stress, abuse, or accident, or forces or exposure beyond
normal use within the specified operational and environmental parameters set forth in the applicable
Product specification; nor shall the above warranty provisions apply to any expendable or consumable
items, such as batteries, supplied with theProduct. EXCEPT FOR THE WARRANTY OF TITLE AND THE
EXPRESS WARRANTIES STATED ABOVE,SELLER DISCLAIMS ALL WARRANTIES ON PRODUCTS
FURNISHED HERUNDER INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABLILTY AND
FITNESS FOR A PARTICULAR USE. ANY IMPLIED WARRANTIES THAT MAY BE IMPOSED BY LAW
ARE LIMITED IN DURATION TO THE LIMITED WARRANTY PERIOD. SOME STATES OR
COUNTRIES DO NOT ALLOW A LIMITATION ON HOW LONG AN IMPLIED WARRANTY LASTS OR
THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
CONSUMER PRODUCTS. IN SUCH STATES OR COUNTIRES, FOR SUCH PRODUCTS, SOME
EXCLUSIONS OR LIMITATIONS OF THIS LIMITED WARRANTY MAY NOT APPLY. The stated express
warranties are in lieu of all obligations or liabilities on the part of Seller for damages, including but not
limited to, special, indirect or consequential damages arising out of or in connection with the use or
performance of the Product or service. Seller’s liability for damages to Buyer or others resulting from the
use of any Product or service furnished hereunder shall in no way exceed the purchase price of said
Product or the fair market value of said service, except in instances of injury to persons or property.