Symmons Carrington 443TB-24 Manual

443RH, 443TB-18, 443TB-24, 443TP, 443TR
Carrington™Accessories
Operation & Maintenance Manual
Model Numbers Specifications
443RH Robe Hook
443TB-18 18" Towel Bar
443TB-24 24" Towel Bar
443TP Toilet Paper Holder
443TR Towel Ring
All premium accessories made from brass plated in
standard polished chrome nish.
Modifications Warranty
-PNL Polished nickel finish
-STN Satin nickel finish
Limited Lifetime - to the original end purchaser in
consumer installations.
5 Years - for commercial installations.
Refer to www.symmons.com/warranty for complete
warranty information.
Note: Append appropriate -sufx to model number.
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3094 REV 0 09/22/14

2
Dimensions
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3094 REV 0 09/22/14
Measurements
A Ø 2 3/8", 60 mm
B 2 3/4", 70 mm
C 5 7/8", 149 mm
D 6 3/4", 171 mm
E 3 3/8", 86 mm
F 7 1/8", 181 mm
G 3 11/16", 94 mm
H 4 3/8", 111 mm
I 18", 457 mm
J 20 3/8", 518 mm
K 2 3/8", 60 mm
L 24", 610 mm
M 26 3/8", 670 mm
Required for Installation
Phillips head
screwdriver
Allen wrench (1/8")
Power drill
Note: Dimensions are subject to change without notice.
AA
KK
G
G
I
I
J
J
C
C
D
D
E
E
F
F
E
E
E
E
B
B
H
H
443RH
443TB-18
KK
L
L
M
M
443TB-24
443TP
443TR

3
Installation
Symmons Industries, Inc. ■31 Brooks Drive ■Braintree, MA 02184 ■[phone] ■ Fax: [phone]
©2014 Symmons Industries, Inc. ■ www.symmons.com ■ [email protected] ■ ZV-3094 REV 0 09/22/14
1) Measure and mark centerlines
for mounting bracket installation
using dimensions on page 2.
Notes: 443TB-18 and 443TB-24 only.
Make sure both centerline marks are
level.
2a) Dry Wall Option: Place mounting
brackets into desired position.
Using brackets as a guide, mark
holes. Screw self-drilling anchors
into wall.
2b) Stud Option: Place mounting
brackets into desired position.
Using brackets as a guide,
carefully drill 3/16" holes
into wall.
3) With mounting brackets in
position, secure to wall using
screws.
4) Slide accessory into position on
bracket and secure with set screw.
1
2
1
3
4
2
1
2
Care and Cleaning
1) Clean nished trim area with a soft cloth using mild soap and water or a non-abrasive cleaner and then quickly rinse
with water.