Configure Device Interface Parameters
Device Name : Max 10 Char Device ID : 001-999
Serial Port : 1200,E,8,1 - 1200,N,8,1 - 2400,E,8,1 - 2400,N,8,1 - 4800,E,8,1 - 4800,N,8,1 - 9600,E,8,1 - 9600,N,8,1 -
19200,E,8,1 - 19200,N,8,1 - 38400,E,8,1 - 38400,N,8,1 - 57600,E,8,1 - 57600,N,8,1 - 115200,E,8,1 -
115200,N,8,1
Delay Time : 001 – 250 ( Serial Port Data End Delay)
New Password : Max 8 Char Socket Port : Default Protocol Port (TCP Server Mode)
User Define Protocol
Mode : R : Receive Mode T : Transfer Mode R+T : Receive and Transfer Dual Mode None : No Use
Protocol : TCP Sever : PC Connect to Module TCP Client : Module Auto Connect to PC UDP : UDP Mode
Click Save Button Module is Auto Reset
MDNET Specification
Items / Specs MDNET-1 MDNET-95A
LAN 10BASE-T/100BASE-TX port, 10/100Mbps auto-sensing
TP port RJ-45 phone jack
Protocol TCP Server/Client, UDP Server/Client, HTTP Server
Interface RS-232 / RS-485 (Auto-detecting)
Connector port 9 PIN D-SUB (RS-232 / RS-485)
Baud rate 19,200 bps (4,800、9,600、19,200、38,400、57,600、115,200)
Parity None , Event , Odd
Data bits / Stop bits 7 , 8 / 1
Software Data keypro None SYW95A-NET
Indicator 4 LED ( Power , RX/TX , Link , Active )
Beep Built-in
Color Beige
Humidity 10% to 95% (Non-condensing)
Operating temperature -20℃to 70℃
Storage temperature -30℃ to 80℃
Mafnetic isolation 1.5KV for Ethernet
Power supply input 8V to 15V DC
Dimensions (mm) 107W x 138H x 30D
* This specification is preliminary and is subject to change without prior notice.