t.akustik spectrum A10 User manual

SCREWING ABSORBERS
These instructions are for the following products: spectrum A10, spectrum A20, spectrum P816.
Open the package carefully! Inserting sharp objects
into the package can damage the absorber. Avoid
using long, sharp tools for opening the package!
UNBOXING
While determining the mounting positions, it helps
to mark the walls and ceiling using a level and
tape measure, in order to achieve even spacing in
relation to corners and sound sources.
DETERMINE THE
MOUNTING POSITION
Carefully remove the products from the package and
remove the protective lm. Also remove the drilling
template and mounting clips and set them aside.
REMOVE PRODUCTS
FROM PACKAGING
The following tools are needed for installation:
✓Box Cutter/ ✓Folding ruler or ✓(Electric) Screwdriver
utility knife tape measure ✓Anchors (6-8)
✓Level ✓Electric drill ✓Screws
✓Pencil ✓Drill bits
Make sure to use the correct type of anchors for your
mounting surface (drywall, masonry, concrete, etc.).
TOOLS
MOUNTING INSTRUCTIONS
EN

Thomann GmbH · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de
DocID: 439571_438581_451072_451071_..._23.03.2021
Position and align the drilling template on the wall. Use
the template to mark the drilling locations through the
paper using a pencil. Then drill the holes.
MARK AND DRILL HOLES
USING THE TEMPLATE
Insert anchors into the holes and use screws
to securely attach the four mounting clips for
installing the absorber.
INSERT ANCHORS, SCREW
IN MOUNTING CLIPS
Now you can attach the absorber to the mounting
clips by pressing it evenly onto the four clips. Repeat
this process for any additional absorbers. That’s it!
ATTACH ABSORBER
Make sure to examine the condition and load carrying capacity of the wall before installation.
TIP:
EN
This product is intended to be used to optimise the room acoustics. Any other use or use un-
der other operating conditions is considered to be improper and may result in personal inju-
ry or property damage. No liability will be assumed for damages resulting from improper use.
Ensure that plastic bags, packaging, etc. are disposed of properly and are not within
reach of babies and young children. Choking hazard!
For the transport and protective packaging, environmentally friendly materials have
been chosen that can be supplied to normal recycling. Ensure that plastic bags, pa-
ckaging, etc. are properly disposed of. Do not just dispose of these materials with
your normal household waste, but make sure that they are collected for recycling.
Please follow the notes and markings on the packaging.
Find more solutions for
your room on our website:
www.takustik.com
Share your installation
with us on Instagram:
www.takustik.com/instagram
Find more installation
guides on YouTube:
www.takustik.com/youtube