TabTimer™ helps keep medications on time™ | www.TabTimer.com.au| 1300 TAB TIMER (1300 822 846)
Pricing and specifications are correct at the time of publishing and may change without notice. Your health professional should be consulted prior to using any TabTimer
product to establish the suitability of a TabTimer product for use, administration or storage of any medications. In purchasing and continuing to use our products you have
agreed to and accept the Terms and Conditions shown on our website. Images are for illustration purposes only. Errors and omissions excluded.
TabTimer™, 'helps keep medications on time™' and the TabTimer™ logo are registered trademarks of TabTimer Pty Ltd © TabTimer Pty Ltd ABN: 99 137 415 948
TO SET THE ALARMS
1. When you are on the normal date and time screen
– press ‘MODE’ once to move to the ALARM function
2. To enter programming mode, press and hold ‘SET/RST’
- ALM -01 should be flashing
3. To change the alarm time press the ‘MODE’ button
4. The hours should be flashing
5. To change the hour for the alarm press the ‘ST./STP’ button
(Ensure that the ‘PM’ indicator is showing if you need the hour to be PM, or not showing if you need AM.
The indicator is in the first red square on the left hand side, under the day.)
6. Press ‘MODE’ to move to the minutes
7. Press ‘ST./STP’ to change the minutes of the alarm
8. Press ‘MODE’ to move to the Alarm Number
9. To set another alarm press ‘ST.STP’ to move to the next alarm number
10. To set additional alarms continue from point 3 above
11. Once you have set all alarms – press ‘SET/RST’ to exit the programming mode
12. Nothing should be flashing
13. Press Mode 5 times to return to the normal date and time
TO TURN SOUND & VIBRATION ON/OFF
1. From the normal date and time display setting
– press ‘MODE’ 5 times until you reach ‘OPTION’ mode
2. VIBRA OFF should be displayed (Vibration OFF)
3. To go into programming mode
- Press and hold the ‘SET/RST’ button until ‘OFF’ flashes
4. Press ‘ST/STP’ to toggle the Vibration ON or OFF as you choose
5. Press ‘MODE’ – SOUND OFF should now be displayed
6. Press ‘ST/STP’ to toggle the Sound ON or OFF as you choose
7. Press ‘SET/RST’ to confirm the settings and exit the programming mode
8. Press ‘MODE to return to the normal date and time
9. If you chose vibration ON , you should see a squiggly line under the seconds
(this indicates that vibration is on, if selected) and
sound ON is represented by a dot with two sets of brackets around it (if selected).
