digicard-AUT User Instructions Page - 6
Generating the Company Card Key
Generating the Company Card Key
To generate a company card identication key, log into your digiCentral
account (the same account as specied in Host Name). Navigate to the
“Company Cards” tab and select “Register new company card” (admin only).
In the description
eld, which is free
form, you can be as
descriptive as you
wish as it will be used
to identify the card in
what could be a long
list. A description
such as “Lincolnshire NDC” is more useful than the card number for
instance. This eld is not used by the system to identify the card hence being
free form.
In the “Connected alert interval” eld you should enter a numerical value
representing the number of hours you wish to wait before the system sends an
alert to an error on a company card. Click “Conrm” and you will automatically
navigate back to the company card list.
The newly registered company card will be in the company card list on
digiCentral. The new entry will have an associated “Key”. Copy and paste this
into the “Key” eld in the digicard-AUT conguration settings.
Fig 4
digicard-AUT User Instructions Page - 7
Testing Connections and Authentication
Testing the Connection
After the information
has been entered to
congure the
digicard-AUT, click the
“Test” button. This will
test that the device
connects to the WiFi, to
digiCentral and that the
digiCentral company
card credentials are
correct.
If all the information is correct you should get three green ticks (see Fig ). If
any connection fails, check that the information entered is correct or contact
your system administrator.
Once your digicard-AUT has been congured and the connection test is
successfully completed, disconnect the device from your PC.
Running digicard-AUT for authentication
Using the v USB power supply provided, plug the digicard-AUT into the mains
supply.
The red power LED should ash before going o. The blue LED should
intermittently ash as the device seeks to connect to the WiFi network.
Enter the company card into the device (chip nearest the LED indicators). The
red LED should change to green, indicating a company card is present. The
blue LED should turn solid once the WiFi connection has been established.
The connection between the digicard-AUT and digiCentral has now been
established, enabling remote download devices to authenticate against the
company card.
*********
*********
*********
*********
Fig
