Tactacam REVEAL X User manual

INSTRUCTION MANUAL
REVEALCELLCAM.COM

2
REVEAL APP DOWNLOAD
VISIT YOUR APP STORE TO DOWNLOAD
DOWNLOAD THE
TACTACAM REVEAL APP

3
TABLE OF CONTENTS
TABLE OF CONTENTS
INTRODUCTION
What is in the Box?
What you will need
QUICK START GUIDE
Setting Up Your Account
Downloading the App
Add Camera to the App
Sending a Test Picture
Leaving Your Camera in the Field
SETTINGS & SPECIFICATIONS
BEST PRACTICES
Proper Camera Placement
Batteries and Cellular Trail Camera Performance
TROUBLESHOOTING
Camera Sends Pictures of Nothing
Night Vision Flash Range Doesn’t Meet Expectations
Camera Stops Taking Images or Won’t Take Images
WARRANTY
3
4
4
4
6
7
7
8
10
11
12
14
14
14
15
15
15
16
17

4
INTRODUCTION
• (1) Trail Camera
• (1) Instruction Manual
• (1) Mounting Strap
• (1) Antenna
• (1) Verizon & AT&T SIM Card
• Full-size SD Card - Class 10, U3,
• 16GB-32GB
• Recommended Brands: Tactacam,
Lexar, SanDisk
(Other brands that are lower end SD cards
are incompatible with the Reveal X-Pro and
will yield unexpected results)
• (12) AA Batteries Required -
Lithium Batteries recommended
in colder temperatures
WHAT IS IN THE BOX? WHAT YOU WILL NEED
RECOMMENDED CAMERA ACCESSORIES (NOT INCLUDED)
SD Card Solar Panel
T-Post MountLockable Security Box
VIEW AND PURCHASE ALL ACCESSORIES AT REVEALCELLCAM.COM
Adjustable Camera Stake

5
INTRODUCTION
1
5
2
6
10
14
18
3
7
11
15
19
20
4
8
12
16
9
13
17
Lens
Antenna
IR LEDs
Camera Working Status Indicator
Device Status Indicator Light (Green/Blue)
SD Card Indicator (Red/Green)
SIM Slot (do not mix SIM’s with other cameras)
Power Switch (ON/SETUP/OFF)
PIR Motion Sensor
Wi-Fi Indicator Light (Blue)
Microphone
Battery Level Indicator
4G Signal Indicator
SD Card Slot
Test Button
Battery Eject Button
Reset Button
External Battery In/DC Port
USB Port
Tripod/Mount Attachment
12
13
10
14
11
9
16
15
1
2
3
4
5
6
7
8
18
19
20
17

6
SETTING UP THE CAMERA
QUICK START GUIDE
1. Install camera’s antenna.
• Note: Do not over tighten the antenna, once it is secure stop tightening to prevent
antenna port damage.
2. Install a Class 10 U3 SD card (16GB or 32GB).
• Recommended brands are: SanDisk, Lexar and Tactacam
3. Install 12 AA batteries.
• To eject the battery tray, press the EJECT button on the Reveal. When inserting
AA batteries correctly orientate + and - on the front and back of the tray.
• See battery details on page 13 under Best Practices.
Verizon and AT&T SIM Card install
Locate the (Verizon and AT&T) Sim card located in the white envelope included
in your package. Remove the desired SIM (Verizon or AT&T) from its holder and
install into the Sim slot of your camera. Cell Phone Carrier vs. Camera Carrier:
The carrier you choose (Verizon or AT&T) does not need to match your cell phone
carrier. Just make sure you choose the carrier that has be best signal coverage in
the area you will be keeping the camera.
https://www.revealcellcam.com/data-plans
When activating the camera in the APP will
need to select (Verizon or AT&T) depending on
which Sim you selected for your camera.
Note: The SIM cards are connected to your
camera so do not mix or use SIM’s from
other cameras including other Reveals.
Here is the link to our Data Plans and Coverage Map

7
QUICK START GUIDE
In your Apple or Google Play Store, download the
Tactacam Reveal app and sign in using the same
email and password you created on the website.
https://account.revealcellcam.com
DOWNLOADING THE APP
If this is your rst Reveal that you are activating,
please visit the Reveal Web Portal at
https://account.revealcellcam.com/activation
to set up your account. You can also access the
Web Portal directly from your app, by clicking
My Reveal on the account page in the app.
If you already have a Reveal account with
ACTIVE cameras, you can simply log in to
your app and add your camera following the
instructions on page 8.
SETTING UP YOUR ACCOUNT

8
QUICK START GUIDE
4
6
ADD CAMERA TO THE APP
1. Navigate to the Reveal app on your device and login
using your Reveal account credentials. Click the home
icon.
2. Click the camera icon at the top.
3. From the camera page click the (+) in the bottom right
hand corner.
4. Select Reveal X and continue.
5. Follow the in-app prompts to activate your Reveal.
Ensure the SIM selected (Verizon or AT&T) mirrors (or
is the same as) the SIM card already inserted in the
camera.
6. The app will prompt you to scan the QR code located
inside the door of the camera.
7. After your camera is activated, turn your camera to
setup, you will see the signal status indicator searching,
and then connect showing the signal strength.
1
2
3

9
QUICK START GUIDE
You can automatically change and apply the camera
settings when your phone is connected to the camera’s Wi-
Fi. This will not work unless you are next to the camera.
1. Turn Reveal X to SETUP mode.
2. When the Wi-Fi light is blinking blue, it is ready to pair
to your phone or tablet.
3. In the app go to the Account page and click Connect to
Reveal X/SK Wi-Fi.
4. Follow the in-app instructions and turn ALL slides to
the ON position. You can also manually connect in your
phone’s Wi-Fi settings, select REVEAL and enter the
password ( Reveal2021 )This Wi-Fi password is case
sensitive, no spaces.
5. See preview on screen
a. Red line on preview is point of focus
b. To send test picture, press “Test” button on camera
Also available in the app while connected to Wi-Fi:
a. Instantly apply setting changes from the app
b. Formatting SD Card
PAIRING YOUR CAMERA TO YOUR PHONE
THROUGH WI-FI

10
QUICK START GUIDE
1. Allow the camera to connect to 4G signal. The
LED signal indicator light will be constant green.
SENDING A TEST PICTURE
• After your camera is activated, you will see the
signal status indicator searching, and then connect
showing the signal strength.
• After the camera has connected, push the test
button to send a photograph.
• You will see the status light blinking as the image
is sending.
• When the test picture sends successfully, the
status light will turn green.
• If the status light turns red there may have been an
issue trying to send the test photo. This is usually
caused by signal strength or the SD Card.
From the camera page click the tool icon ( ) to make
changes to the cameras settings. Make sure to select
“Apply Settings” when done to save your changes.
Note: In cameras SETTINGS > Settings Check, Daily
will check settings every 24 hours. Instant will Receive
settings Instantly but will consume more battery.
REMOTELY CHANGE THE CAMERA SETTINGS FROM THE APP

11
START USING THE REVEAL X
1. While your camera is connected to your phone
with Wi-Fi, you will be able to access a live
preview to help with camera setup and proper
placement.
2. Ensure the antenna is securely tightened.
3. Wipe down the seal, removing any dirt and/or
debris.
4. Turn the camera to the ON position.
5. As long as your phone picks up a signal, be
sure a motion detected picture is sent to
your phone via the app. This may take a few
minutes.
LEAVING YOUR CAMERA IN THE FIELD
SENDING A TEST PICTURE (CONTINUED)
2. Refer to the app to be sure the picture has successfully sent.
3. While your camera is connected to your phone with Wi-Fi, you will
be able to access a live preview to help with camera setup and
proper placement.
4. Allow the camera to connect to 4G signal. The LED signal indicator
light will be constant green.

12
SETTINGS / SPECIFICATIONS
Camera Mode Photo; Photo+Video
Day/Night Mode Daytime: Color, Nighttime: B+W
IR Range 96+ Feet
PIR Angle 45*
Flash No Glow IR Technology effectively eliminates all
visible ash
Operating Keys (2) 1x Power button; Navigation arrows
Lens F=6mm; F/No=2.0;
FOV=60* Auto IR-Cut-Remove (at night)
SD Card Class 10, U3, 16GB-32GB, minimum 90MB/Sec
Status Indicator 1 LED
Picture Format JPEG
Video Optional
Trigger Speed 0.5 seconds
SD Card Loop Optional
Operation Power 9-12V
Battery X = 12xAA Cartridge
Optional external power source (12V external
battery pack or solar panel)
- Barrel plug reducer size 4x1.7mm
External DC 12V-2A

13
Camera Mode Photo; Photo+Video
Day/Night Mode Daytime: Color, Nighttime: B+W
IR Range 96+ Feet
PIR Angle 45*
Flash No Glow IR Technology effectively eliminates all
visible ash
Operating Keys (2) 1x Power button; Navigation arrows
Lens F=6mm; F/No=2.0;
FOV=60* Auto IR-Cut-Remove (at night)
SD Card Class 10, U3, 16GB-32GB, minimum 90MB/Sec
Status Indicator 1 LED
Picture Format JPEG
Video Optional
Trigger Speed 0.5 seconds
SD Card Loop Optional
Operation Power 9-12V
Battery X = 12xAA Cartridge
Optional external power source (12V external
battery pack or solar panel)
- Barrel plug reducer size 4x1.7mm
External DC 12V-2A
SETTINGS / SPECIFICATIONS

14
BEST PRACTICES
1. Use the recommended batteries for the Reveal:
2. In cold weather, use lithium ion batteries for optimal camera speed and
performance.
3. Expected picture count with the proper batteries (in greater than freezing temps)
are:
4. If connecting the Tactacam External Solar Panel (sold separately), the lithium
batteries would act as a backup power source.
BATTERIES AND CELLULAR TRAIL CAMERA PERFORMANCE
• Energizer Lithium batteries
• Duracell Max Alkaline batteries
• Rayovac UltraPro Alkaline batteries
• Lithium: 4,000+ pictures
• Alkaline: 2,500+ pictures
1. Location and placement is critical for optimal camera performance.
2. Avoid hanging the camera on small trees that are prone to moving with the wind.
3. Place the camera about waist high on the tree or post.
4. We recommend having the camera pointing down about 7 to 15 degrees. We
recommend using shims to achieve the desired angle.
5. To achieve the best lighting conditions, face your camera North. Avoid facing your
camera toward the sun.
6. If the camera is placed too high on a tree and angled down, the eld of view
“window” becomes narrower, this is only a good idea if you plan to set your camera
to watch a bait station or scrape.
7. On a food plot:
8. On a trail:
PROPER CAMERA PLACEMENT
• Camera height and angle is critical to get the widest eld of view. Do not place
camera too high.
• For the best view place your camera at an angle looking up or down the trail
rather than perpendicular to the trail.

15
TROUBLESHOOTING
1. Check to make sure that batteries are fully charged.
2. “Max Range” offers better IR ash range. Given IR ash range values are
based on max range setting; adjust Night Mode to Max Range for better
night vision ash range.
3. High quality 1.2V NiMH rechargeable AA batteries can also offer
improved IR ash range. Note: If your camera will be used in cold
weather, we do recommend lithium batteries to deliver consistent results.
4. Certain surroundings (like trees, walls, ground, etc.) within ash range can
deliver you better night time images. To improve night images do not aim
camera in an open eld where there is nothing to reect the IR ash back.
NIGHT VISION FLASH RANGE DOESN’T MEET EXPECTATION
Use a protective security box such as the
one listed at www.revealcellcam.com
TO HELP PREVENT THEFT OR DAMAGE
Motion sensors (PIR sensors) are actually heat and motion sensors. This is
why on a hot and windy day, people get false triggers. People and animals
are not the only objects that will trigger your camera; vegetation and
precipitation can act as a moving target as well.
1. Be sure to clear any low hanging tree branches, brush, and weeds from
the eld of view, 5-10 yards in front of the camera.
2. Motion sensitivity recommendations:
• To start set to High, and decrease sensitivity if you’re getting too many false
triggers (9 being the highest and 1 being the lowest).
CAMERA SENDS PICTURES OF NOTHING

16
1. Make sure that the SD card is not full. If the SD card is full, the camera
will stop taking images. Users can turn on SD Loop to avoid such
problems. This will cause the SD card to overwrite older images.
2. Make sure that alkaline or NiMH-AA batteries have enough power for the
camera to work.
3. Format the SD card with the camera before using or when the camera
stops taking images.
CAMERA STOPS TAKING IMAGES OR WON’T TAKE IMAGES
TROUBLESHOOTING
The Reveal is IP66 rated waterproof. This means the camera is water
resistant against powerful jets. The only way the Reveal can get
condensation in or behind the lens is if the antenna is not screwed in
all the way, or if there is dirt or debris on the seal. Follow these at home
instructions to alleviate this issue if need be:
• Pull the SD card out and let the camera sit for 3-4 days open, in an area where
there is circulating air (fan or vent).
• You can also put in a sealed container with rice for 24 hours to draw out the
moisture.
• Clean the seal well and tighten your antenna.
• Place back out in the eld.
1. Do not open the camera right away.
2. Be sure to dry the outer housing of the camera, preventing water from
entering the inside of the camera and causing internal damage.
INTERNAL CONDENSATION ON LENS
IF THE CAMERA HAS ACCIDENTALLY BEEN SUBMERGED IN WATER

17
LIMITED WARRANTY
1. One year from the date of purchase.
2. Be sure to register your Reveal under warranty at
https://www.revealcellcam.com/warranty-registration
1. This limited warranty covers: manufacturer defects in materials and
workmanship including but not limited to:
2. Covered cameras will either be repaired by a certied camera
technician, or replaced.
1. This limited warranty does not cover any damage caused by the owner
modifying, attempting to x, or otherwise altering the product.
2. This limited warranty excludes damage caused by people or animals,
including but not limited to: antenna, strap, Fresnel lens, glass lens, or
camera housing.
HOW LONG DOES THIS COVERAGE LAST?
WHAT IS COVERED?
WHAT IS NOT COVERED?
• Defective buttons
• Cracked/chipped glass lens
• Broken SD card or SIM card spring mechanism
• Broken USB port
If damage is caused to the camera by the owner or animal, contact customer
support for repair options.

18
FCC REGULATIONS
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the Federal
Communications Commission rules. These limits are designed to
provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Changes or modications to this equipment not expressly approved
by the party responsible for compliance could void the user’s
authority to operate the equipment. This device complies with
Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may note cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
Federal Communications Commission - Part 15

19
DO NOT RETURN
THIS PRODUCT TO
YOUR RETAILER
For any warranty issues or questions on how
to lm your hunts with Tactacam:
EMAIL [e-mail]
OR
CALL 218-282-5650
110 N Sunset Blvd, Caledonia, MN 55921
www.revealcellcam.com