FCC Warning
This device has been tested and found to
comply with limits for a Class A digital device,
pursuant to Part 15 of FCC Rules. These
limits are designed to provide reasonable
protection against harmful interference when
the equipment is operated in a commercial
environment. This equipment generates
and radiates radio frequency energy and, if
not installed and used in accordance with the
user’s manual, it may cause interference in
which case users will be required to correct
interference at their own expenses.
CE Warning
This is a Class A product. In a domestic
environment, this product may cause radio
interference in which case the user may be
required to take adequate measures.
Introduction
The Switch provides 24 10/100/1000Mbps
NWAY RJ-45 ports and can support 4 Combo
Gigabit SFP open slot to uplink. It is
designed for easy installation and high
performance in an environment where traffic
on the network and the number of user
increase continuously. With newest Gigabit
chip set, 19” Gigabit Ethernet switch can fully
support highest speed without hanging on
problem even when Full-Duplex full loaded.
The rack-mount size is specifically designed
for medium to large workgroups. The Switch
can be installed where space is limited;
moreover it provides smooth network
migration and is easy to upgrade the network
capacity. The 19” size can be rack-mount on
19” cabinet.
Key Features
24 Port PoE+ 10/100/1000M Nway
(Auto-negotiation) with 4 Combo Gigabit
SFP open Slot, Web Smart Switch
19” rack-mount size
Auto-learn of networking configurations
Auto-detect full/half-duplex modes for any
port
Dedicated full-duplex 2000Mbps bandwidth
Store-and-Forward switching methods
IEEE 802.3x flow control for full-duplex and
back-pressure flow control for half-duplex
Non-blocking & Non-head-of-line blocking
full wire speed forwarding
Auto-MDI/MDI-X function for any port
Smart plug & play
