， 。，： 。www.taiden.com !"
Please read safety instructions in installation and operating manual on CD before using the system. For any other resources, please visit our website: www.taiden.com.
Ceiling mounted
Install the ceiling mounting kit at the top of the
transceiver
φ98mm
TOP
TOP
TOP
TOP
TOP
TOP
/ For hard ceiling
/ For sprung roof
5 30mm
Hold the spring straightly and vertically
，
Drill a mounting hole into the ceiling, insert the
cable and spring into the hole until the base of
the transceiver can fit with the ceiling
，
M3
Drill two holes according to the position and put
the included rubber plugs into, then fix the
mounting bracket on the ceiling with M3 screws
Put the slots of the transceiver into the mounting
bracket and fix it with clockwise rotation
，
Tripod mounted
/ djustable angleFor a
()
Tripod (height adjustable)
Fixed screw
M3
M3 screw
Stator
Flexible tube
bracket
M3
Install the transceiver and
the stator at the ends of the
flexible tube bracket
,
Aim the hole of the stator to the
fixed screw and fix it with
clockwise rotation
Hole
/ ixed angleFor f
Put the mounting bracket on
the button of the transceiver
and fix it with rotation
,
Aim the hole of the mounting
bracket to the fixed screw and
fix it with clockwise rotation
Mounting bracket
Hole
Fixed screw
()
Tripod (height adjustable)
(HCS-5300TD&HCS-5300TH) (HCS-5300TD&HCS-5300TH)
| HCS-5300T#$%& '()*+
Quick Reference Card of Installation | HCS-5300T Series Transceiver
