Tala Echo User manual

Thoughtful lighting, responsibly designed in London.
Thank you for making the switch to Tala.
Discover the full Tala family at tala.co.uk
BEFORE STARTING
Please read instructions thoroughly before installation and keep them
for future reference. Please take extreme care when dealing with
electrical equipment.
IMPORTANT
Bulbs must be installed in xture before turning on.
WARNING
Ensure power is turned OFF before inserting plug.
CARE AND CLEANING
We recommend cleaning with a soft dry cloth. Do not use abrasive
materials as these will damage the nish of the product.
WARRANTY AND AFTER-CARE
This product has a three-year warranty. If there appears to be a
functional defect with the product during this time, please contact our
team at [email protected]. The external exible cable or cord of
this luminaire cannot be replaced; if the cord is damaged, the luminaire
shall be destroyed.
SKU - DWS-ECHO-FL-01-US
US
IP20 110 - 120V
INSTALLATION GUIDE
David Weeks for Tala
Echo - Floor Lamp

ECHO FLOOR LAMP - PROVIDED COMPONENTS
x1 Lower Stem
A
x7 Tala Sphere IV bulbs
C
x3 Short Hex head bolts
x1 Upper stem with Dimmer
D
E
B
B
E
F
x1 Base
x3 Long Hex head bolts
C
F
A
x1 M5 Hex Key
x1 M8 Hex Key
+
D

STEP 1
Align the bolt holes on the Bottom Stem
with the holes on the Base .
Secure in place with the three longer Hex
Head bolts .
C
F
B
STEP 2
Slot the Upper Stem into the Lower
Stem , and rotate the Upper Stem
untill the Bolt Holes are aligned.
Secure in place with the three Hex Head
screws .
A
B
E
A
B
E
F
C
B

STEP 5
Switch the power on and rotate the dial on
your dimmer until the bulbs light up. Adjust
the dimmer for your desired light output.
Join the Community
[email protected] | Instagram: @tala | Facebook: talaHQ | Pinterest: TalaLED | Tag: lighttoliveby
Tala North America, Inc. P.O. Box 89, 1051 Port Washington Blvd. Port Washington, NY 11050
STEP 3
Insert your bulbs into the top of the lamp,
rotating clockwise until tight. Take care not
to tighten too much to avoid breakage.
D
STEP 4
Insert the lamp plug into your chosen wall
socket, making sure the power is switched off.