Tamerica PROCOIL 53 User manual

IMPORTANT !!!
It will be beneficial to first get yourself acquainted with the features of your machine before
attempting to use Keep in mind all operational instructions, tips, and safety reminders every time
you use your machine to best achieve desirable results
PROCOIL – 53 & 53Ei
Coil Binding Machine
OPERATING MANUAL
SAFETY REMINDERS & OTHER USEFUL TIPS
1. This machine is not a toy, therefore children sho ld not be allowed to operate it.
2. Make s re yo r machine is placed on top of a st rdy s rface before se & that the electrical chord is sec rely attached
to a wall o tlet (110V).
3. Keep hair, fingers, jewelry and all loose clothing away from all moving parts of yo r machine as they may accidentally
be p lled into the machine ca sing damage to it or worse, inj ry to the ser.
4. Never operate yo r machine near water or any type of liq id to red ce the risk of electric shock.
5. Periodically check the electrical chord of yo r machine for any visible sign of damage and avoid sing it when it is
present.
6. Use a test sheet to p nch to determine if there will be any holes r nning off the sides and disengage the appropriate
pins.
7. Do not p nch more than 20 sheets of 20lb. paper when p nching. Preferably, p nch no more than 12-15 sheets at a
time to help extend the life of yo r machine.
8. When p nching PVC or PP covers, it is recommended that yo p nch at a maxim m of 2 sheets at a time.
9. To prolong the life of the coil inserting roller, always se the foot pedal for coil insertion. Leaving it r nning or in the
“ON” position may shorten the life span of yo r roller.
10. Periodically check and empty the waste drawer. An overfilled waste drawer may damage the machine when p nching.
11. Protect yo r machine keeping it from the elements s ch as water or excessive heat.
12. Yo r machine sho ld not be sed other than its intended p rpose and f nction.
13. Always call the a thorized dealer first for technical iss es or any malf nction. Trying to fix the machine by yo rself
might not only be dangero s, b t may also void the warranty.
WARRANTY INFORMATION
O r machines are g aranteed against defects in materials and workmanship for a period of one year from the date of
original p rchase from an a thorized dealer of TAMERICA PRODUCTS, INC. If yo perceive or experience any iss e
with the machine, kindly report it to the dealer within 10 b siness days of said p rchase to avail of free pick p and
redelivery from TAMERICA’s Service Center. After the first 10 days, yo will either receive service instr ctions and parts
via mail free of charge for the d ration of the warranty.
Note that when ret rning the machine for warranty claims, the machine sho ld be ret rned in its complete original
packaging to avoid incidental or conseq ential damages that may void the claim. A copy of the invoice or other proof of
p rchase also needs to be sent with the machine.
Upon eval ation of the machine and the determination of the act al defect, the machine will be restored to its reg lar
working condition by the Service Center and shipped back to yo free of charge. If yo change yo r mind and simply
want to ret rn the machine, a 20% restocking fee is charged even within the 10-day grace period. F rther, yo will have
to cover freight to ret rn the machine and it has to be in brand-new resalable condition, otherwise, yo might inc r more
charges.
This warranty covers all defects incurred in the normal use of the equipment except in the following cases:
1. Loss or damage to the eq ipment d e to improper operation, ab se, mishandling or fail re to follow the operating
instr ctions.
2. Removal or alteration of the serial n mber.
3. The machine being serviced or modified by anyone other than a certified technician a thorized by TAMERICA.
This warranty is valid only within the United States or its provinces and territories.

5. Press the coil inserter roller switch to the ON
position then grasp the doc ment and gently press
against the coil against the roller.
6. Use the handheld coil crimper pliers to crimp
the ends to keep the doc ment from nbinding.
MACHINE OPERATION
1. Adj st depth margin to control how far or close
yo want the holes to be in relation to the edge
of yo r doc ment.
2. Adj st r ler g ide according to the size of yo r
doc ment & disengage pins that wo ld p nch off
the edge of the doc ment by p lling them towards
yo .
3. P ll p nch handle downwards to p nch holes
on the doc ment then retract to original position.
4. Man ally insert the coil into the first 4 or 5 holes
as shown. Do this for all holes for models witho t a
coil inserting roller (Procoil-53).
Remember to periodically check and empty the waste bin to help ensure uninterrupted use
FEATURES
SET-UP
Reference the table above to determine the necessary coil diameter size based on sheet capacity. This may also be sed
to select the correct depth margin setting by t rning the depth margin control dial.
For safety reminders and other useful tips on the proper operation of your machine, please turn to the back page.
P nch Handle
Disengageable Pins
Waste Drawer
Coil Crimper Pliers
incl ded
Coil Inserting RollerToggle Switch
(for Procoil -53Ei)
Coil Inserting Roller
Depth Margin Control
R ler G ide
Paper Entrance
6.553.52.5Depth Margin
220190155120110958570554020Sheet Capacity
25.4mm22mm19mm16mm14.3mm12.7mm11mm9.5mm8.0mm6.9mm4.8mm
1"7/8"3/4"5/8"9/16"1/2"7/16"3/8"5/16"1/4"3/16"
Coil Diameter
SPECIFICATIONS
Binding Material : Plastic Coil
Binding Capacity : 25mm
P nching Capacity : 20 sheets (20lb. paper)
P nching Length : 11.7” (A4)
P nching Format : Electric (Procoil-53Ei); Man al (Procoil-53)
Hole Pitch : 6.35mm (4:1)
Hole Spec : 4mm
Depth Margin : 2.5 – 6.5mm
P nch Holes : 53
Disengageable Pins : 53
Power S pply : 110V/60Hz
Machine Dimensions : 18”x14250”x10”
Machine Weight : 29lbs (13kgs)
Warranty : 1 Year