T&J EL5770 User manual

Hush Bedside Clock
with super-silent technology
INSTRUCTION MANUAL
Imported and distributed by Easylife Group Ltd, London NW1 0JP
Customer service: 0871 855 6100
For more innovative products from Easylife please visit:
www.easylifegroup.com
IN5770-1 © 2014 Easylife Group Ltd
PANTONE 072 C
PANTONE 123 C
CARE AND MAINTENANCE
• Clean your alarm clock with a soft damp cloth. Do not use solvents or scouring agents.
• Remove the battery if you do not use the product for a long period of time.
• Keep your clock in a dry place.
TROUBLESHOOTING
Problem Solution
No pointer movement Ensure that the battery polarity is correct
Change the battery
No MSF reception Press the REC button for 3 seconds
Change location (interference!)
Wait for attempted reception during the night
Set the clock manually
Incorrect display Press the RESET button with a pin
Change the battery
If your device fails to work despite these measures contact our Customer Service Team.
IMPORTANT SAFETY INSTRUCTIONS
• This product is exclusively intended for the eld of application described in this instruction manual.
• Unauthorised repairs, modications or changes to the product are prohibited.
• This product is not be used for medical purpose or for public information, it is only intended for home use.
Caution! Risk of injury:
• Keep this instrument and its battery out of the reach of children.
• Batteries must not be thrown into a re, short-circuited, taken apart or recharged. Risk of explosion!
• Batteries contain harmful acids. Low batteries should be changed as soon as possible to prevent
damage caused leaking.
• Wear chemical-resistant protective gloves and glasses when handling leaking batteries.
Important information on product safety!
• Do not place the unit near extreme temperatures, vibration or shock. Protect it from moisture.
DISPOSAL
• Please respect the environment!
• Dispose of the packaging according to the local recycling regulations.
• Dispose of the appliance at the end of its life span according to environmental considerations.
WARNING
This product is intended for domestic use only.
TECHNICAL SPECIFICATION
Power: Battery 1.5 V AA (included). Measures: Dia. 11cm (4 1/3 inches). Weight: 146g (with 1xAA battery)
Model No. EL5770
Please read carefully before use and keep for future reference
T
&
J
Tavistock & jones
Accurate
to one
second in
1,000,000
years
f
R
A
D
I
O
C
O
N
T
R
O
L
L
E
D
T
&
J
Tavistock & jones

PANTONE 072 C
PANTONE 123 C
Customer service: 0871 855 6100
For more innovative products from Easylife please visit:
www.easylifegroup.com
Dear Customer
Thank you for purchasing the Hush Bedside Clock.
The incessant ticking of most bedside clocks is irritating and makes dropping off
to sleep a problem. Thanks to a major breakthrough in clock engineering from
watchmakers Tavistock & Jones, the Hush Bedside Clock is different, it’s Super
Silent! Instead of the usual jerky movement - the cause of the ticking sound in
ordinary clocks - the second hand sweeps smoothly round, completely soundlessly.
Radio-controlled from the UK’s atomic time regulator, it’s accurate to one second
in 1,000,000 years and adjusts automatically for GMT/BST. With a loud ‘sleep-proof’
alarm plus snooze function and light, it’s powered by 1xAA battery and measures
11cm (4 1/3inches) in diameter.
BEFORE FIRST USE
PLEASE REMOVE THE PLASTIC TAB FROM WITHIN THE BATTERY COMPARTMENT
BEFORE FIRST USE. THIS TAB HAS BEEN INSTALLED TO PREVENT THE BATTERY
FROM DRAINING, IT IS RECOMMENDED YOU CHECK THE BATTERY CAPACITY ON
A REGULAR BASIS AND FOLLOW THE USER INSTRUCTIONS.
REPLACING BATTERY
To install and replace the battery, please follow these steps:
1. Pull down the battery (1) compartment
(at the back of the case).
2. Insert one new battery (AA type,
1.5V, LR6), observing correct polarity as
indicated in the battery compartment.
3. Put lid (1) back again.
PARTS
1. Battery Compartment
2. Alarm Dial Knob
3. Alarm On/Off Switch
4. Snooze/Light Button
5. M.SET button
6. REC button
7. RESET button
SETTING THE CLOCK AUTOMATICALLY
• Once the battery is installed properly, the clock automatically sets itself to 12 o’clock and then begins
receiving the signal. Once it has received the MSF signal and processed it accordingly (which takes
from 3 to maximum 12 minutes), the clock automatically displays the correct time. We recommend
that you do not put up or hang up the clock anywhere during this process.
• If the clock still has not set itself after 12 minutes, reception is faulty or not possible at the chosen
location. Repeat setting at a different location by pressing the RESET button (7).
ALARM FUNCTIONS
Set Alarm Time
• Turn the set-alarm knob (2) in the direction of the arrow in order to set the alarm time. Never turn
the set-alarm knob in the opposite direction since this could damage the works.
Switch on Alarm
• Push the alarm ON/OFF switch (3) upwards. At the set alarm time, the alarm sounds for maximum
2 minutes if the alarm ON/OFF switch (3) is still upwards (i.e. at the ON position) or the top (4)
button is not pressed.
Interrupt Alarm (Snooze)
• Press the snooze button on the top (4) of the alarm clock, the light turns on for 5 seconds. The
alarm stops for 5 minutes and then sounds again. The snooze function can be repeated 3-7 times.
Automatic Switch-off
• If the alarm is not interrupted or switched off, it stops automatically after approx. 2 minutes. It is
reactivated 12 hours later at the same time.
Switch-off Alarm
• When the alarm is activated, push the alarm ON/OFF switch (3) downwards, the alarm stops.
ILLUMINATION
• To be able to read the face of your alarm clock even when it is dark, briey press the button (4) on
the top of the alarm clock. The illumination function is activated for 5 seconds.
TO SET THE TIME MANUALLY
• Press and hold the M.SET (5) button for 3 seconds to set the time, the second hand moves and
stops at 12 o’clock position:
• Press the M.SET button (5) for 1 second to advance 1 minute
• Press the M.SET button (5) for more than 1 second to auto advance the minute hand.
• If the M.SET button (5) is not pressed for 30 seconds, or press REC button (6), the clock is set.
RECEIVING THE RADIO CONTROL SIGNAL
• The radio-controlled clock will automatically receive the radio signal maximum 2 times every day at
1:00am and 3:00am. During the signal reception, the second hand stops at 12 O’clock position. It
will take 3-12 minutes to receive the radio signal.
• During forced MSF reception by pressing the REC button (6) for 3 seconds, the second hand stops
at 12 O’clock position and starts receiving the radio signal for 3-12 minutes. Once it has received
the MSF signal and processed it accordingly, the clock automatically displays the correct time. If
the clock still has not set itself after 12 minutes, reception is faulty and it will resume the time before
the forced reception.
T
&
J
Tavistock & jones
Table of contents
Other T&J Clock manuals
Popular Clock manuals by other brands

Oregon Scientific
Oregon Scientific BAR339PA user manual

ADVANCED Network Devices
ADVANCED Network Devices AND-BTN-KIT-1 Installation

Lathem
Lathem DDC2 Series Installation and user guide

Bodet
Bodet Profil 930 Installation and operating instructions

Cypress
Cypress CY3672-USB manual

La Crosse Technology
La Crosse Technology 513-1417 user manual