TaoTronics TT-AH024 User manual

Model: TT-AH024
TaoTronics Ultrasonic Cool Mist Humidier
User Manual
NORTH AMERICA
E-mail: [e-mail](US)
[e-mail](CA)
[e-mail](UK)
Tel: [phone] (Monday-Friday: 9:00 – 17:00 PST)
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: Floor 7, Building E, Galaxy World Phase II, Shenzhen, China
MANUFACTURER
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/pages/user-manual
www.taotronics.com
Register to extend your 18 months warranty by visiting
taotronics.com/warranty:
[e-mail](US)
[e-mail](CA)
[e-mail](UK)
03-19-2020
TT-AH024_V2.4_EN
ASIA PACIFIC
E-mail: [e-mail](JP)
JP Importer: 株式会社SUNVALLEY JAPAN
Address: 〒104-0032 東京都中央区八丁堀3丁目18-6 PMO京橋東9F
EUROPE
E-mail:
[e-mail](UK)
[e-mail](DE)
[e-mail](FR)
[e-mail](ES)
[e-mail](IT)

STATEMENT
SAFETY INSTRUCTIONS
BEFORE USING THE HUMIDIFIER
WHEN USING THE HUMIDIFIER
AFTER USING THE HUMIDIFIER
PACKAGE CONTENTS
SPECIFICATIONS
PRODUCT DIAGRAM
OPERATIONS AND FUNCTIONS
Add water
Power On / Off and Mist Adjustment
Low Water Protection: Auto Shut-off the Humidier
CLEANING AND MAINTENANCE
Caution
Daily Maintenance
Weekly Maintenance
Scale Removal Instructions
Disinfecting Instructions
Clean the Dustproof Sponge
End-Of-Season Care and Storage
TROUBLESHOOTING GUIDE
WARRANTY
TAOTRONICS CUSTOMER CARE
CONTENTS
01
01
06
08
10
13/15
07
16
16
06
02/03
04
05
08
09
09
10
10
10
10/11
12
12
12

STATEMENT
Thank you for purchasing a TaoTronics product that has been tested to meet our stringent
quality standards. This product is covered with TaoTronics product and labor warranty for 12
months from the date of its original purchase.
Please email us with your order ID and problem or issue via [email protected], we will
respond within 24 hours.
Please read the User Manual thoroughly. Clean and maintain the product as instructed. If any
abnormalities occur, please refer to the Troubleshooting Guide rst.
This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect,
improper repair or alteration by unauthorized persons, or a failure to follow operating instruc-
tions provided with the product including adding essential oils directly into the tank and base.
This warranty does not apply to normal wear and tear or commercial use.
In no event shall liability exceed the purchase price paid by the purchaser of the product.
Under no circumstances shall there be liability for any loss – direct, indirect or incidental – or
consequential damage arising out of, or in connection with the use of the product.
SAFETY INSTRUCTIONS
The humidier was made with safe and environmental protection materials, it has been
certied and complied with the requirement of sale regions’ related regulations or laws.
IMPORTANT: Please read and save this SAFETY INSTRUCTIONS before using the device.
Basic precautions should always be followed to reduce the risk of re, electrical shock, and
injury to persons or damage to the product.
BEFORE USING THE HUMIDIFIER
1. Please extend the cord and check any signs of damage. Do not use the humidier if the cord
has been damaged.
2. DO NOT place this humidier in wet environments.
Please always keep the humidier out of reach of patients & children & pet.
1. Please always place the unit on a smooth, at, lint-free, non-metallic, waterproof and level
surface and keep it away from direct sunlight.
2. Always place the unit 2 feet (60 cm) above the oor, 12 inches (30 cm) away from the wall,
other appliances or wooden furniture.
02
1
30 CM
60 CM
2
30 CM
12
01

1. DO NOT place the unit on carpet, towel or wood surface, which will block the vent and may
damage the unit.
2. DO NOT place the humidier near naked ames and heat sources, such as stove tops,
ovens, radiators or computers.
WHEN USING THE HUMIDIFIER
1. DO NOT plug the unit with wet hands.
2. DO NOT direct the mist nozzle against the wall.
1. DO NOT use your hand or any other object to cover the nozzle while the unit is on to avoid
damaging the product or causing injury.
2. DO NOT clean the unit while it is connected to a power source or while it is on.
1. DO NOT move or tilt the humidier while it is in operation.
2. The most comfortable environmental humidity is between 40%-60%. Please adjust the mist as
needed.
Humidity
40% 60%
12
12
12
12
04
03

AFTER USING THE HUMIDIFIER
1. Always disconnect from a power source by pulling the plug when not in use.
2. Humidier requires regular cleaning. Please refer to, and follow the Cleaning and
Maintenance instructions.
1. DO NOT clean the humidier right after turning it off if the humidier has been diffusing warm
mist. Allow the humidier to completely cool down before cleaning.
2. DO NOT attempt to repair or adjust any electrical or mechanical functions on this humidier.
Doing so will void your warranty.
· 1 x TaoTronics Humidier (Model: TT-AH024)
· 1 x Cleaning Brush
· 1 x Dustproof Sponge
· 1 x Thank You Card
· 1 x User Manual
TT-AH024
AC 100-120V 50 / 60Hz
Min: 15W
Max: 25W
4.0L / 1.06Gal
Min: 60ml/h
Max: 300ml/h
12-50h
20-40m² / 215-430ft²
<27dB
258 x 164 x 338mm / 10.2 x 6.5 x 13.3in
1350g / 47.6oz
Model
Operating Voltage
Rated Power
Water Tank Capacity
Mist Output
Working Time on a Full Tank
Recommended Room Size
Noise
Dimensions
Net Weight
PACKAGE CONTENTS
SPECIFICATIONS
12
12
06
05

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
1. Nozzle
2. Handle
3. Water Tank
4. Water Level Window
5. Base
6. Power Cord
7. Control Knob
8. LED Indicator
9. Mufer
10. Tank Cap
11. Water Inlet
12. Air Outlet
13. Water Reservoir
14. Atomizer
15. Water Floater
16. Dustproof Sponge
17. Air Inlet
OPERATIONS AND FUNCTIONS
1 2 3 4
Add water
1. Turn the water tank upside down. Remove the tank cap and ll the tank with clean and
cool water only.
2. Attach the tank cap and place the tank back onto the base. Please make sure it ts
together securely so that water can go from the tank to the reservoir.
5
1 2 3 4
1. If tap water is too hard, it is recommended to use ltered or distilled water to avoid white
dust. DO NOT use hot water.
2. DO NOT add any essential oils or medicinal tablets into the water tank.
3. DO NOT add water into the base or through nozzle.
4. DO NOT move the humidier while the water tank is full of water to avoid leakage or base
overlling.
PRODUCT DIAGRAM
08
07

1 2 3
Power On / Off and Mist Adjustment
Plug the power cord into a wall socket. Now the humidier is ready for use.
1. Rotate the control knob clockwise to the ON position. The white LED indicator will light up
indicating the humidier has been turned on to a minimum mist level.
2. Keep rotating the control knob clockwise to increase the mist level.
3. Rotate the control knob counterclockwise to the OFF position to turn off the humidier. The
LED indicator will turn off. The fan will work for another 3 minutes to dry the mist tube.
The most comfortable environmental humidity is between 40%-60%. Please adjust the mist
as needed.
Low Water Protection: Auto Shut-off the Humidier
When there is not enough water inside the water reservoir, the humidier will stop misting and
the LED indicator will become red. It is designed for safety to prevent the humidier from
possibly overheating and damaging the atomizer.
CLEANING AND MAINTENANCE
Caution
1. DO NOT submerge the base in water.
2. Make sure water does not enter the base through the air outlet, air inlet,
or the control knob.
3. DO NOT wash any part of this humidier in dish washer which will
damage the humidier and void the warranty.
Daily Maintenance
Turn off the humidier, unplug it from the power source. Drain water from the tank, reservoir
and base.
Weekly Maintenance
1. To properly clean your humidier, we recommend you to remove scale and disinfect the
humidier separately.
2. DO NOT mix vinegar and bleach solutions together. Do not use more than 1 tsp. of
bleach per gallon of water to avoid damaging your humidier.
3. Please make sure the sealing ring on the tank cap is installed properly after cleaning to
avoid water leakage.
1 2
Scale Removal Instructions
10
09

15S
3
15-20
minutes
4
56
1. Turn off and unplug the humidier.
2. Remove the water tank from the base. Remove the tank cap. Make sure that the white
sealing ring does not come off. Drain water from the water tank and base. Remove any
accessories and set aside.
3. Fill the water tank half full. Add in 1 teaspoon of undiluted distilled white vinegar. Attach the
tank cap and shake for 15 seconds.
4. Place the tank onto the base. The vinegar solution will enter the water reservoir to loosen
mineral buildup (scale) on the atomizer, water oater and the bottom of the water tank. Set
still for 15-20 minutes.
5. Uncap the tank cap and drain the solution. Wipe the atomizer and oater with a soft cloth
to remove loosened mineral deposits.
6. Rinse both the water reservoir and water tank until the smell of vinegar (for scale removal)
or bleach solution (for disinfecting, see below) is gone.
Disinfecting Instructions
1. Follow steps 1-2 of the previous section on scale removal.
2. Fill the water tank half full. Add in ½ tsp of bleach. Place the tank cap back on. Swish the
solution around in tank. Place the tank on the base. The bleach solution will enter and
disinfect the water reservoir as well as the other components. Set still for 15-20 minutes.
3. Follow steps 4-6 of the previous section on scale removal to complete disinfecting the
humidier.
End-Of-Season Care and Storage
1. Follow the cleaning instructions when the humidier will not be used for at least one week,
or at the end of the season. Remove any accessories used with the humidier and allow the
humidier and accessories to dry completely before storing.
2. DO NOT store with water inside the base, water reservoir, or tank.
3. Pack the unit safely and store in a cool, dry location.
Clean the Dustproof Sponge
Clean the dustproof sponge (at the bottom of base) with water or detergent once a month.
Put it back in place after cleaning.
12
11

TROUBLESHOOTING GUIDE
1. If the information listed in the troubleshooting guide can’t solve your problem, please
email us for help.
2. Failure to keep this unit clean from mineral deposits may affect operation of this unit.
3. Customer failure to follow these instructions may void the warranty.
1
3
2
1. Spring
2. Sealing ring
3. Water Floater
Problem Possible Cause Solution
Unit not plugged in
No power from power outlet
Did not turn on the unit
Ensure unit is properly
plugged in
Try another power outlet
Check the Control Knob is
turned to the ON position.
LED indicator is off
Ensure the Spring is
secured properly to the tank
bottom allowing water to pass
through to the base
1
Adjust the water oater to
a horizontal position and
make sure it can rise up with
water
3
Water oater stuck
3
No water in the water
reservoir
LED indicator stays red
Not enough water inside the
tank Rell and reinstall the water tank
The LED Indicator is white but
no mist or little mist is
produced
Mist level is set too low Adjust to maximum mist
Mineral buildup on the
atomize
Feel if any air comes out from
the nozzle. If yes, then clean
water scale on the atomizer
as instructed
The base might be overlled
Remove the tank, empty the
base and place the lled tank
on the empty base
Tank leakage
Tank may be damaged Check for possible cracks in
the tank, replace if necessary
Tank cap is not tightened
securely Tighten the tank cap
Spring stuck
Ensure the spring is
properly secured to the tank
bottom allowing water to
pass through to the base.
1
1
Sealing ring was not
installed on tank cap
Install the sealing ring on
the tank cap, please contact
us if it is missing
22
Mist level is set too high for
the room size
1. Check if the room is too
humid and adjust to lower
mist. 40%-60% works best
2. Open door and windows,
or change to a larger room
Air inlet is blocked
Humidier should be placed
on a hard at surface, 2 feet
above the oor, 12 inches
away from the wall. Point
nozzle away from wall or
window
Low indoor temperature
leads to liquefaction
Raise the room temperature
to 25°C / 77°F
Mist height is low, damping
surrounding desk or oor.
Condensation forms around
humidier or on windows
and walls
14
13

Mist level is set too low for
the room size
1. Adjust to maximum mist
2. Close door or windows to
reduce air ventilation, or
change to a smaller room
Poor humidication
Air inlet is blocked
Humidier should be placed
on a hard at surface, 2 feet
above the oor, 12 inches
away from the wall
Low indoor temperature
leads to liquefaction
Raise the room temperature
to 25°C / 77°F
Tap water may contain too
much minerals
Replace with ltered or
distilled water or use a
TaoTronics Demineralization
Cartridge
White dust appears or the
black coating on the base
akes off
Clean the unit
1. Clean the humidier as
instructed
2. Leave the empty and
opened water tank in a
cool place for 12 hours
without the tank cap
attached
Strange Odor
Water is going down to the
water reservoir
This is normal while it is
working
Strange water noise
Unit works for too long
Power off and place in a
well-ventilated place for 10
minutes
Humidier is getting too hot
This product is covered with TaoTronics product and labor warranty for 12 months from the
date of its original purchase. You will be given a warranty extension of 18 months if the
product is registered on our website (www.taotronics.com).
Any defective part will be, at the discretion of SUNVALLEYTEK INTERNATIONAL INC. , repaired
or replaced at no charge if the appliance has not been tampered with and has been used
according to these printed directions.
If any problems occur, please contact TaoTronics support ([email protected]) immedi-
ately to launch a warranty claim. Specify model number and your Amazon order number. Our
Consumer Service Representative will respond within 1 business day, advise you how to
correct the problem yourself, or instruct you on how to return the defective unit back to us for
repair or replacement.
We can only provide after sales service for products that are sold by TaoTronics or TaoTronics
authorized retailers and distributors. If you have purchased your unit from a different place,
please contact your seller for return and warranty issues.
PLEASE CONTACT US BEFORE RETURNING THIS PRODUCT TO THE STORE.
EMAIL TAOTRONICS CUSTOMER CARE FOR PROBLEMS AND QUESTIONS.
WE WILL RESPOND WITHIN 1 BUSINESS DAY.
WARRANTY
CONTACT / TAOTRONICS CUSTOMER CARE
E-mail: [email protected](US)
[email protected](CA)
[email protected](UK)
Tel: [phone] (Monday-Friday: 9:00 – 17:00 PST)
Website: www.taotronics.com
16
15

FCC Compliance
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause
undesired operation.
WEEE Compliance
Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in countries with separate collection systems)
This marking on the product, accessories or literature indicates that the product and its
electronic accessories should not be disposed of with other household waste at the end of
their working life. To prevent possible harm to the environment or human health from
uncontrolled waste disposal, please separate these items from other types of waste and
recycle them responsibly to promote the sustainable reuse of material resources. Household
users should contact either the retailer where they purchased this product, or their local
government ofce, for details of where and how they can take these items for environmentally
safe recycling. Business users should contact their supplier and check the terms and conditions
of the purchase contract. This product and its electronic accessories should not be mixed with
other commercial wastes for disposal.

尺寸：150*200mm
装订成册
材质：封面128克铜版纸 内页80克书纸
Model:
TT-AH024