TaoTronics TT-AH025 User manual

尺寸：160*160mm
装订成册
材质：封面128克铜版纸 内页80克书纸
Model:
TT-AH025

TT-AH025_V1.0 EN
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/downloads-TT-AH025-CE-Cert.html
www.taotronics.com
MODEL: TT-AH025
ULTRASONIC COOL MIST HUMIDIFIER
User Manual
Extend your warranty to 18 months by
registering your product on our website
taotronics.com/warranty:
[e-mail](US)
[e-mail](CA)
[e-mail](UK)
EUROPE
E-mail:
[e-mail](UK)
[e-mail](DE)
[e-mail](FR)
[e-mail](ES)
[e-mail](IT)
EU Importer: ZBT International Trading GmbH
Address:Halstenbeker Weg 98C, 25462 Rellingen, Deutschland
NORTH AMERICA
E-mail : [e-mail](US)
[e-mail](CA)
Tel : [phone] (Monday-Friday: 9:00 – 17:00 PST)
US Distributor: SUNVALLEYTEK INTERNATIONAL INC.
Address:46724 Lakeview Blvd, Fremont, CA 94538
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129
MANUFACTURER
ASIA PACIFIC
E-mail:[email protected](JP)
Tel:03-5542-0238（10〜18時/土日祝除く）
JPImporter:株式会社SUNVALLEYJAPAN
Address:〒104-0032東京都中央区八丁堀３丁目18-6PMO京橋東９F

STATEMENT
SAFETY INSTRUCTIONS
BEFORE USING THE HUMIDIFIER
WHEN USING THE HUMIDIFIER
AFTER USING THE HUMIDIFIER
PACKAGE CONTENTS
SPECIFICATIONS
PRODUCT DIAGRAM
OPERATIONS AND FUNCTIONS
Add Water
Power On / Off
Light Control
Low Water Protection: Auto Shut-off the Humidier
CLEANING AND MAINTENANCE
Caution
Daily Maintenance
Weekly Maintenance
Scale Removal Instructions
Disinfecting Instructions
Clean the Dustproof Sponge
End-Of-Season Care and Storage
TROUBLESHOOTING GUIDE
WARRANTY
TAOTRONICS CUSTOMER CARE
CONTENTS
01
01
05
05
07
13/15
06
16
16
02
03
04
07
08
09
09
09
09
10
11
12
12
08
08

1. Please check the cord for any signs of damage.Do not use the humidier if the cord
has been damaged.
2. DO NOT place this humidier in wet environments.
Please always keep the humidier out of reach of patients & children & pet.
1. Please always place the unit on a smooth, at, lint-free, non-metallic, waterproof and level
surface and keep it away from direct sunlight.
2. Always place the unit 2 feet (60 cm) above the oor, 12 inches (30 cm) away from the wall,
other appliances or wooden furniture. 02
STATEMENT
Thank you for purchasing a TaoTronics product that has been tested to meet our stringent quality standards.
This product is covered with TaoTronics product and labor warranty for 12 months from the date of its
original purchase.
Please email us with your order ID and problem or issue via [email protected], we will respond within
24 hours.
Please read the User Manual thoroughly. Clean and maintain the product as instructed. If any abnormalities
occur, please refer to the Troubleshooting Guide rst.
This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect, improper repair
or alteration by unauthorized persons, or a failure to follow operating instructions provided with the product
including adding essential oils directly into the tank and base. This warranty does not apply to normal wear
and tear or commercial use.
In no event shall liability exceed the purchase price paid by the purchaser of the product. Under no
circumstances shall there be liability for any loss – direct, indirect or incidental – or consequential damage
arising out of, or in connection with the use of the product.
SAFETY INSTRUCTIONS
The humidier was made with safe and environmental protection materials, it has been certied and
complied with the requirement of sale regions’ related regulations or laws.
IMPORTANT: Please read and save this SAFETY INSTRUCTIONS before using the device. Basic precautions
should always be followed to reduce the risk of re, electrical shock, and injury to persons or damage to
the product.
01
BEFORE USING THE HUMIDIFIER
1 2
30 CM
60 CM
2
30 CM
1

The humidier was made with safe and environmental protection materials, it has been certied and
complied with the requirement of sale regions’ related regulations or laws.
IMPORTANT: Please read and save this SAFETY INSTRUCTIONS before using the device. Basic precautions
should always be followed to reduce the risk of re, electrical shock, and injury to persons or damage to
the product.
WHEN USING THE HUMIDIFIER
1. DO NOT plug the unit with wet hands.
2. DO NOT direct the mist nozzle against the wall.
1. DO NOT use your hand or any other object to cover the nozzle while the unit is on to avoid
damaging the product or causing injury.
2. DO NOT clean the unit while it is connected to a power source or while it is on.
1. DO NOT move or tilt the humidier while it is in operation.
2. The most comfortable environmental humidity is between 40%-60%. Please adjust the mist as
needed.
Humidity
12
04
03
12
12
40% 60%
AFTER USING THE HUMIDIFIER
1. DO NOT clean the humidier right after turning it off if the humidier is warm to touch.
Allow the humidier to completely cool down before cleaning.
2. DO NOT attempt to repair or adjust any electrical or mechanical functions on this humidier.
Doing so will void your warranty.
12
12
1. Always disconnect from a power source by pulling out the plug when not in use.
2. Humidier requires regular cleaning. Please refer to, and follow the Cleaning and
Maintenance instructions.

· 1 x TaoTronics Humidier (Model: TT-AH025)
· 1 x Cleaning Brush
· 1 x Dustproof Sponge
· 1 x Thank You Card
· 1 x User Manual
TT-AH025
AC 100-120V 50 / 60Hz
Min: 15W
Max: 25W
6.0L / 1.59Gal
Min: 60ml/h
Max: 300ml/h
20-60h
20-40m² / 215-430ft²
≤35dB
251 x 167 x 412mm / 9.9 x 6.6 x 16.2in
1775g/62.6oz
Model
Operating Voltage
Rated Power
Water Tank Capacity
Mist Output
Working Time on a Full Tank
Recommended Room Size
Noise
Dimensions
Net Weight
PACKAGE CONTENTS
SPECIFICATIONS
0605
1. Nozzle
2. Water Tank
3. Water Level Window
4. Tank Cap
5. Water Inlet
6. Handle
7. LED Indicator
8. Control Knob
9. Base
10. Light Button
11. Night Light
12. Floater
13. Air Outlet
14. Tank Light
15. Water Reservoir
16. Atomizer
17. Dustproof Sponge
18. Air Inlet
PRODUCT DIAGRAM
1
3
5
15
16
12
4
9
11
10
18
13
14
817
2
7
push
6

10. Light Button
11. Night Light
12. Floater
13. Air Outlet
14. Tank Light
15. Water Reservoir
16. Atomizer
17. Dustproof Sponge
18. Air Inlet
OPERATIONS AND FUNCTIONS
1 2 3 4
Add Water
1. Remove the nozzle and turn the water tank upside down.
2. Remove the tank cap and ll the tank with clean and cool water only.
3. Attach the tank cap and place the tank back onto the base. Make sure it ts together
securely so that water can go from the tank to the reservoir. Put the nozzle back on.
5
1 2 3 4
1. If tap water is too hard, it is recommended to use ltered or distilled water to avoid white
dust. DO NOT use hot water.
2. DO NOT add any essential oils or medicinal tablets into the water tank.
3. DO NOT add water into the base or through nozzle.
4. DO NOT move the humidier while the water tank is full of water to avoid leakage or base
overlling.
07 08
Plug the power cord into a wall socket. Now the humidier is ready for use.
1. Rotate the control knob clockwise to the ON position. The blue LED indicator will light up
indicating that the humidier has been turned on .
2. Keep rotating the control knob clockwise to increase the mist level.
3. Rotate the control knob counterclockwise to decrease the mist level.
4. Rotate the control knob counterclockwise to the OFF position to turn off the humidier.
The LED indicator will turn off. The fan will work for another 3 minutes to dry the mist tube.
Power On / Off and Mist Adjustment
Light Control
Low Water Protection: Auto Shut-off the Humidier
1. Press the Light Button to turn on / off the night light.
2. Press and hold the Light Button for 1.5 seconds to turn on / off the tank light.
When there is not enough water inside the water reservoir, the humidier will stop misting and the LED
indicator will become red. It is designed for safety concern to prevent the humidier from possibly
overheating and damaging the atomizer.
OFF
ON
Max
Min
Note:
The most comfortable environmental humidity is between 40%-60%.
Please adjust the mist output as needed.
OFF
ON
Max
Min

1. If tap water is too hard, it is recommended to use ltered or distilled water to avoid white
dust. DO NOT use hot water.
2. DO NOT add any essential oils or medicinal tablets into the water tank.
3. DO NOT add water into the base or through nozzle.
4. DO NOT move the humidier while the water tank is full of water to avoid leakage or base
overlling.
09
CLEANING AND MAINTENANCE
Caution
1. DO NOT submerge the base in water.
2. Make sure water does not enter the base through the air outlet, air inlet,
or the control knob and light button.
3. DO NOT wash any part of this humidier in dish washer which will
damage the humidier and void the warranty.
Daily Maintenance
Turn off the humidier, unplug it from the power source. Drain water from the tank, reservoir
and base.
Weekly Maintenance
1. To properly clean your humidier, we recommend you to remove scale and disinfect the
humidier separately.
2. DO NOT mix vinegar and bleach solutions together. Do not use more than 1 tsp. of
bleach per gallon of water to avoid damaging your humidier.
3. Please make sure the rubber ring & rubber cap & spring on the tank cap is installed
properly after cleaning to avoid water leakage. Please refer to the diagram on page 13.
1 2
Scale Removal Instructions
10
15S
3
15-20
minutes
4
56
When there is not enough water inside the water reservoir, the humidier will stop misting and the LED
indicator will become red. It is designed for safety concern to prevent the humidier from possibly
overheating and damaging the atomizer.

1. Turn off and unplug the humidier. Remove the nozzle.
2. Remove the water tank from the base. Remove the tank cap. Make sure that the white
sealing ring does not come off. Drain water from the water tank and base. Remove any
accessories and set them aside.
3. Fill the water tank half full. Add 1 teaspoon of undiluted distilled white vinegar. Attach the
tank cap and shake the tank for 15 seconds.
4. Place the tank onto the base. The vinegar solution will enter the water reservoir to loosen
mineral buildup (scale) on the atomizer, water oater and the bottom of the water tank.
Set it still for 15-20 minutes.
5. Uncap the tank cap and drain the solution. Wipe the atomizer and oater with a soft cloth
to remove loosened mineral deposits.
6. Rinse both the water reservoir and water tank until the smell of vinegar (for scale removal)
or bleach solution (for disinfecting, see below) is gone.
Disinfecting Instructions
1. Follow steps 1-2 of the previous section on scale removal.
2. Fill the water tank half full. Add ½ tsp of bleach. Place the tank cap back on. Swish the
solution around in tank. Place the tank on the base. The bleach solution will enter and
disinfect the water reservoir as well as the other components. Set it still for 15-20 minutes.
3. Follow steps 4-6 of the previous section on scale removal to complete disinfecting the
humidier.
1. Follow the cleaning instructions when the humidier will not be used for at least one week,
or at the end of the season. Remove any accessories used with the humidier and allow the
humidier and accessories to dry completely before storing.
2. DO NOT store with water inside the base, water reservoir, or tank.
3. Pack the unit safely and store in a cool, dry location.
Clean the Dustproof Sponge
Clean the dustproof sponge (at the back of base) with water or detergent once a month. Put
it back in place after cleaning.
push
End-Of-Season Care and Storage
11 12
push

TROUBLESHOOTING GUIDE
1. If the information listed in the troubleshooting guide can’t solve your problem, please
email us for help.
2. Failure to keep this unit clean from mineral deposits may affect operation of this unit.
3. Customer failure to follow these instructions may void the warranty.
3
2
1. Spring
2. Rubber ring
3. Water oater
Problem Possible Cause Solution
Unit not plugged in.
No power from power outlet.
No water in the water
reservoir.
Ensure unit is properly
plugged in.
Try another power outlet.
Failed to turn on the unit.
Ensure the spring is
secured properly to the tank
allowing water to pass
through to the base.
1
Adjust the water oater to
a horizontal position and
make sure it can rise up with
water .
3
Water oater get stuck.
3
Waterless indicator is
constantly on.
The unit is on but no mist
or little mist is produced.
Tank leakage.
1
2
1
Mist height is low,
damping surrounding
desk or oor.Condensation
forms around humidier or
on windows and walls.
Not enough water inside the
tank. Rell and reinstall the water tank.
Adjust to larger mist output.
Remove the tank, empty the base and
place back the lled tank on the empty
base.
Put your hand towards the nozzle and
feel if there is air coming out. If yes,
clean the water scale on the atomizer
as instructed(p10).
Mist level is set too low.
The base might be overlled.
Mineral buildup on atomizer.
Check for possible cracks in the tank.
Ask for a replacement if it is damaged.
Tighten the tank cap.
Check the tank cap for rubber ring,
contact us if any is missing.
Ensure the spring is secured properly
to the tank allowing water to pass
through to the base.
Tank may be damaged.
Tank cap is not tightened
securely.
Rubber ring was not
installed on tank cap.
Spring get stuck.
1. Check if the room is too humid,adjust
to lower mist output.
2. Open door and windows, or change
to a larger room.
Humidier should be placed on a hard
at surface, 2 feet above the oor, 12
inches away from the wall. Point mist
outlet away from wall or window.
Raise the room temperature to 25°C/77°F.
Mist level is set too high for
the room size.
Air inlet is blocked.
Low indoor temperature
leads to liquefaction.
13 14
1

Poor humidication.
Tap water may contain too
much minerals.
Replace with ltered or distilled
water or use with a TaoTronics
Demineralization Cartridge.
White dust appears / Black
coating in the base akes off.
Unit needs to be cleaned.Strange odor.
Water is going down to the
water reservoir. This is normal while it is working.
Strange water noise.
Unit works long hours. Power off and place in a
well-ventilated place for 10 minutes.
Humidier is getting too hot.
1-1. Adjust to maximum mist output.
1-2. Close door or windows to
reduce air ventilation, or
change to a smaller room.
Humidier should be placed on
a hard at surface, 2 feet above
the oor, 12 inches away from
the wall.
Raise the room temperature
to 25°C/77°F.
Mist level is set too low for the
room size.
Air inlet is blocked.
Low indoor temperature
leads to liquefaction.
Clean the humidier as instructed.
Leave the empty water tank open
in a cool place for 12 hours without
the water tank cap attached.
This product is covered with TaoTronics product and labor warranty for 12 months from the
date of its original purchase. You will be given a warranty extension of 18 months if the
product is registered on our website (www.taotronics.com).
Any defective part will be, at the discretion of SUNVALLEYTEK INTERNATIONAL INC. , repaired
or replaced at no charge if the appliance has not been tampered with and has been used
according to these printed directions.
PLEASE CONTACT US BEFORE RETURNING THIS PRODUCT TO THE STORE.
EMAIL TAOTRONICS CUSTOMER CARE FOR PROBLEMS AND QUESTIONS.
WE WILL RESPOND WITHIN 1 BUSINESS DAY.
WARRANTY
CONTACT / TAOTRONICS CUSTOMER CARE
Sunvalleytek USA, Inc.
Address: 46724 Lakeview Blvd, Fremont, CA 94538
E-mail: [email protected](US)
[email protected](CA)
[email protected](UK)
Tel: [phone] (Monday-Friday: 9:00 – 17:00 PST)
Website: www.taotronics.com
We can only provide after sales service for products that are sold by TaoTronics or TaoTronics
authorized retailers and distributors.If you have purchased your unit from a different place,
please contact your seller for return and warranty issues.
If any problems occur, please contact TaoTronics support ([email protected])
immediately to launch a warranty claim. Specify model number and your Amazon order
number. Our Consumer Service Representative will respond within 1 business day, advise you
how to correct the problem yourself, or instruct you on how to return the defective unit back
to us for repair or replacement.
15 16

Sunvalleytek USA, Inc.
Address: 46724 Lakeview Blvd, Fremont, CA 94538
E-mail: [email protected](US)
[email protected](CA)
[email protected](UK)
Tel: [phone] (Monday-Friday: 9:00 – 17:00 PST)
Website: www.taotronics.com
17
www.taotronics.com