TaoTronics TT-AH001 User manual

MODEL: TT-AH001
ULTRASONIC COOL MIST HUMIDIFIER
User Manual
TT-AH001
NORTH AMERICA
E-mail: [e-mail](US)
[e-mail](CA)
[e-mail](UK)
Tel: [phone] (Monday-Friday: 9:00 – 17:00 PST)
US Distributor: SUNVALLEYTEK INTERNATIONAL INC.
Address: 46724 Lakeview Blvd, Fremont, CA 94538
Manufacturer: Shenzhen NearbyExpress Technology Development Co.,Ltd.
Address: 333 Bulong Road, Shenzhen, China, 518129
MANUFACTURER
Learn more about the EU Declaration of Conformity:
https://www.taotronics.com/downloads-TT-AH001-CE-Cert.html
www.taotronics.com
Register to extend your 18 months warranty by visiting
taotronics.com/warranty:
[e-mail](US)
[e-mail](CA)
[e-mail](UK)

STATEMENT
SAFETY INSTRUCTIONS
BEFORE USING THE HUMIDIFIER
WHEN USING THE HUMIDIFIER
AFTER USING THE HUMIDIFIER
PACKAGE CONTENTS
SPECIFICATIONS
PRODUCT DIAGRAM
OPERATIONS AND FUNCTIONS
Add water
Power On / Off
Mist Adjustment
Timer Setting
Nightlight / Sleep Mode
Humidity Setting
Low Water Protection: Auto Shut-off the Humidier
CLEANING AND MAINTENANCE
Caution
Daily Maintenance
Weekly Maintenance
Scale Removal Instructions
Disinfecting Instructions
Clean the Dustproof Sponge
End-Of-Season Care and Storage
TROUBLESHOOTING GUIDE
WARRANTY
TAOTRONICS CUSTOMER CARE
CONTENTS
01
01
06
08
11
14/16
07
17
17
06
02/03
04
05
08
09
10
11
11
11
11
13
13
13
09
09
09
09

STATEMENT
Thank you for purchasing a TaoTronics product that has been tested to meet our stringent
quality standards. This product is covered with TaoTronics product and labor warranty for 12
months from the date of its original purchase.
Please email us with your order ID and problem or issue via [email protected], we will
respond within 24 hours.
Please read the User Manual thoroughly. Clean and maintain the product as instructed. If any
abnormalities occur, please refer to the Troubleshooting Guide rst.
This warranty is void if the defect is caused by accidental damage, misuse, abuse, neglect,
improper repair or alteration by unauthorized persons, or a failure to follow operating instruc-
tions provided with the product including adding essential oils directly into the tank and base.
This warranty does not apply to normal wear and tear or commercial use.
In no event shall liability exceed the purchase price paid by the purchaser of the product.
Under no circumstances shall there be liability for any loss – direct, indirect or incidental – or
consequential damage arising out of, or in connection with the use of the product.
SAFETY INSTRUCTIONS
The humidier was made with safe and environmental protection materials, it has been
certied and complied with the requirement of sale regions’ related regulations or laws.
IMPORTANT: Please read and save this SAFETY INSTRUCTIONS before using the device.
Basic precautions should always be followed to reduce the risk of re, electrical shock, and
injury to persons or damage to the product.
BEFORE USING THE HUMIDIFIER
1. Please extend the cord and check any signs of damage. Do not use the humidier if the cord
has been damaged.
2. DO NOT place this humidier in wet environments.
Please always keep the humidier out of reach of patients & children & pet.
1. Please always place the unit on a smooth, at, lint-free, non-metallic, waterproof and level
surface and keep it away from direct sunlight.
2. Always place the unit 2 feet (60 cm) above the oor, 12 inches (30 cm) away from the wall,
other appliances or wooden furniture.
02
1
30 CM
60 CM
2
30 CM
12
01
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT

1. DO NOT place the unit on carpet, towel or wood surface, which will block the vent and may
damage the unit.
2. DO NOT place the humidier near naked ames and heat sources, such as stove tops,
ovens, radiators or computers.
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
WHEN USING THE HUMIDIFIER
1. DO NOT plug the unit with wet hands.
2. DO NOT direct the mist nozzle against the wall.
1. DO NOT use your hand or any other object to cover the nozzle while the unit is on to avoid
damaging the product or causing injury.
2. DO NOT clean the unit while it is connected to a power source or while it is on.
1. DO NOT move or tilt the humidier while it is in operation.
2. The most comfortable environmental humidity is between 40%-60%. Please adjust the mist as
needed.
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
Humidity
40% 60%
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
12
12
12
12
04
03
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT

AFTER USING THE HUMIDIFIER
1. Always disconnect from a power source by pulling the plug when not in use.
2. Humidier requires regular cleaning. Please refer to, and follow the Cleaning and
Maintenance instructions.
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
1. DO NOT clean the humidier right after turning it off if the humidier has been diffusing warm
mist. Allow the humidier to completely cool down before cleaning.
2. DO NOT attempt to repair or adjust any electrical or mechanical functions on this humidier.
Doing so will void your warranty.
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
· 1 x TaoTronics Humidier (Model: TT-AH001)
· 1 x Cleaning Brush
· 1 x Dustproof Sponge
· 1 x Thank You Card
· 1 x User Manual
TT-AH001
AC 100-120V 50 / 60Hz
Min: 18W
Max: 30W
4.0L / 1.06Gal
Min: 100±15ml/h Medium: 200±23ml/h
Max: 300±30ml/h
12-30h
10-30 m² / 107-322 ft²
≤38dB
205 x 135 x 300mm / 8.1 x 5.3 x 11.8in
1600g / 56.4oz
Model
Operating Voltage
Rated Power
Water Tank Capacity
Mist Output
Working Time on a Full Tank
Recommended Room Size
Noise
Dimensions
Net Weight
PACKAGE CONTENTS
SPECIFICATIONS
12
12
06
05
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT

1
10
1. Nozzle
2. Handle
3. Water Tank
4. Tank Cap
5. Filter
6. Water Inlet
7. Base
8. Water Reservoir
9. Atomizer
10. Floater
11. Nightlight
12. Air Outlet
13. Cleaning Brush
14. LED Display
15. Power Cord
16. Control Buttons
17. Air Inlet
18. Dustproof Sponge
OPERATIONS AND FUNCTIONS
1 2 3 4
Add water
1. Remove the nozzle and turn the water tank upside down.
2. Remove the tank cap and ll the tank with clean and cool water only.
3. Attach the tank cap and place the tank back onto the base. Make sure it ts together
securely so that water can go from the tank to the reservoir. Put the nozzle back on.
5
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
1 2 3 4
1. If tap water is too hard, it is recommended to use ltered or distilled water to avoid white
dust. DO NOT use hot water.
2. DO NOT add any essential oils or medicinal tablets into the water tank.
3. DO NOT add water into the base or through nozzle.
4. DO NOT move the humidier while the water tank is full of water to avoid leakage or base
overlling.
PRODUCT DIAGRAM
08
07
TIMER
NIGHTLIGHT/SLEEP
MIST +/-
ON/OFF
HUMIDISTAT
2
3
6
4
5
8
7
9
12
13
11
17
14
16
15
18
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT

Low Water Protection: Auto Shut-off the Humidier
When there is not enough water inside the water reservoir, the humidier will stop misting and
a waterless icon will light up on the display. It is designed for safety to prevent the humidier
from possibly overheating and damaging the atomizer.
10
09
TIMER
NIGHTLIGHT/SLEEP
ON/OFF
MIST+/-
HUMIDISTAT
Connect to a power source, all the indicators on the LED display will ash once. The unit is in
standby mode now with the LED display showing the environment humidity level.
ON/OFF
1. Press the Power Button once to enter medium level misting by default. The LED display will
show the mist level and environment humidity level.
2. Press again to stop misting, the fan will continue working for 5 minutes to dry the mist tube.
Power On / Off
MIST+/- Mist Adjustment
When the unit is on, press the Mist Button to adjust the mist between low / medium / high
levels.
TIMER Timer Setting
Press the Timer Button to set the timer from 1 hour to 24 hours, the timer will ash three times to
conrm your setting. Once set, the LED display will show the countdown timer and the
environment humidity level alternately. When time is up, the unit will automatically turn off.
NIGHTLIGHT/SLEEP
Nightlight / Sleep Mode
1. Press the Nightlight Button / Sleep Button once to turn on the nightlight.
2. Press it again to enter sleep mode with the mist level switching to low level. All the indicators
on the LED display will turn off except the sleep indicator.
3. In sleep mode, all the other buttons remain functional.
4. Press one more time to exit sleep mode.
HUMIDISTAT Humidity Setting
1. Press the Humidity Button to set the humidity level from 30% to 95% with an increase /
decrease of 5% in each tap.
2. The humidity level set will ash three times to conrm your setting.
3. The unit will stop misting once the environment humidity reaches the preset humidity level
and resume misting once the environment humidity level is below the preset level.
4. To exit the humidity setting, press the Humidity Button one more time when humidity is set to
95% or restart the unit.
The most comfortable environmental humidity is between 40%-60%. Please adjust the mist
as needed.

TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
15S
3
15-20
minutes
4
56
1. Turn off and unplug the humidier. Remove the nozzle.
2. Remove the water tank from the base. Remove the tank cap. Make sure that the white
sealing ring does not come off. Drain water from the water tank and base. Remove any
accessories and set aside.
3. Fill the water tank half full. Add in 1 teaspoon of undiluted distilled white vinegar. Attach the
tank cap and shake for 15 seconds.
4. Place the tank onto the base. The vinegar solution will enter the water reservoir to loosen
mineral buildup (scale) on the atomizer, water oater and the bottom of the water tank. Set
still for 15-20 minutes.
5. Uncap the tank cap and drain the solution. Wipe the atomizer and oater with a soft cloth
to remove loosened mineral deposits.
6. Rinse both the water reservoir and water tank until the smell of vinegar (for scale removal)
or bleach solution (for disinfecting, see below) is gone.
CLEANING AND MAINTENANCE
Caution
1. DO NOT submerge the base in water.
2. Make sure water does not enter the base through the air outlet, air inlet,
or the control buttons and LED display.
3. DO NOT wash any part of this humidier in dish washer which will
damage the humidier and void the warranty.
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
Daily Maintenance
Turn off the humidier, unplug it from the power source. Drain water from the tank, reservoir
and base.
Weekly Maintenance
1. To properly clean your humidier, we recommend you to remove scale and disinfect the
humidier separately.
2. DO NOT mix vinegar and bleach solutions together. Do not use more than 1 tsp. of
bleach per gallon of water to avoid damaging your humidier.
3. Please make sure the rubber ring & rubber cap & spring on the tank cap is installed
properly after cleaning to avoid water leakage. Please refer to the diagram on page 14.
1 2
Scale Removal Instructions
12
11
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT
TIMER
NIGHTLIGHT/SLEEP
MIST+/-
ON/OFF
HUMIDISTAT

TROUBLESHOOTING GUIDE
1. If the information listed in the troubleshooting guide can’t solve your problem, please
email us for help.
2. Failure to keep this unit clean from mineral deposits may affect operation of this unit.
3. Customer failure to follow these instructions may void the warranty.
1
3
2
1. Spring
2. Rubber ring
3. Water oater
Problem Possible Cause Solution
Unit not plugged in
No power from power outlet
No water in the water
reservoir
Ensure unit is properly
plugged in
Try another power outlet
LED display won't light up
Ensure the spring is
secured properly to the tank
allowing water to pass
through to the base
1
Adjust the water oater to
a horizontal position and
make sure it can rise up with
water
3
Water oater stuck
3
Waterless indicator is
constantly on
Disinfecting Instructions
1. Follow steps 1-2 of the previous section on scale removal.
2. Fill the water tank half full. Add in ½ tsp of bleach. Place the tank cap back on. Swish the
solution around in tank. Place the tank on the base. The bleach solution will enter and
disinfect the water reservoir as well as the other components. Set still for 15-20 minutes.
3. Follow steps 4-6 of the previous section on scale removal to complete disinfecting the
humidier.
End-Of-Season Care and Storage
1. Follow the cleaning instructions when the humidier will not be used for at least one week,
or at the end of the season. Remove any accessories used with the humidier and allow the
humidier and accessories to dry completely before storing.
2. DO NOT store with water inside the base, water reservoir, or tank.
3. Pack the unit safely and store in a cool, dry location.
Clean the Dustproof Sponge
Clean the dustproof sponge (at the bottom of base) with water or detergent once a month.
Put it back in place after cleaning.
14
13

16
15
LED display is on, no mist or
little mist is produced
Tank leakage
1
2
1
Mist height is low, damping
surrounding desk or oor.
Condensation forms around
humidier or on windows
and walls
Poor humidication
Tap water may contain too
much minerals
Replace with ltered or
distilled water or use with a
TaoTronics Demineralization
Cartridge
White Dust Appears / Black
coating in the base akes off
Unit needs to be cleanedStrange Odor
Water is going down to the
water reservoir
This is normal while it is
working
Strange water noise
Unit works for too long
Power off and place in a
well-ventilated place for 10
minutes
Humidier is getting too hot
Not enough water inside the
tank
Rell and reinstall the water
tank
Adjust to maximum mist
Check if current humidity is
higher than preset humidity,
reset humidity to a higher
level
Remove the tank, empty
the base & replace the
lled tank on the empty
base
Feel if air comes out from
the the nozzle, if yes, then
clean water scale on the
atomizer as instructed
Mist level is set too low
Preset humidity is set too low
The base might be overlled
Mineral buildup on atomizer
Check for possible cracks in
the tank, replace if
necessary
Tighten the tank cap
Check the tank cap for
rubber ring, rubber cap
and spring, contact us if
any is missing
Ensure the spring is
secured properly to the
tank allowing water to pass
through to the base
Tank may be damaged
Tank cap is not tightened
securely
Rubber ring was not
installed on tank cap
Spring stuck
1. Check if the room is too
humid, adjust to lower
mist, 40%-60% works best
2. Open door and windows,
or change to a larger
room
Humidier should be
placed on a hard at
surface, 2 feet above the
oor, 12 inches away from
the wall. Point Mist Outlet
away from wall or window
Raise the room temperature
to 25°C/77°F
Mist level is set too high for
the room size
Air inlet is blocked
Low indoor temperature
leads to liquefaction
1-1. Adjust to maximum mist
1-2. Close door or windows to
reduce air ventilation, or
change to a smaller room
Humidier should be
placed on a hard at
surface, 2 feet above the
oor, 12 inches away from
the wall
Raise the room temperature
to 25°C/77°F
Mist level is set too low for the
room size
Air inlet is blocked
Low indoor temperature
leads to liquefaction
Clean the humidier as
instructed
Leave the empty water tank
open in a cool place for 12
hours without the water
tank cap attached

This product is covered with TaoTronics product and labor warranty for 12 months from the
date of its original purchase. You will be given a warranty extension of 18 months if the
product is registered on our website (www.taotronics.com).
Any defective part will be, at the discretion of SUNVALLEYTEK INTERNATIONAL INC. , repaired
or replaced at no charge if the appliance has not been tampered with and has been used
according to these printed directions.
If any problems occur, please contact TaoTronics support ([email protected]) immedi-
ately to launch a warranty claim. Specify model number and your Amazon order number. Our
Consumer Service Representative will respond within 1 business day, advise you how to
correct the problem yourself, or instruct you on how to return the defective unit back to us for
repair or replacement.
We can only provide after sales service for products that are sold by TaoTronics or TaoTronics
authorized retailers and distributors. If you have purchased your unit from a different place,
please contact your seller for return and warranty issues.
PLEASE CONTACT US BEFORE RETURNING THIS PRODUCT TO THE STORE.
EMAIL TAOTRONICS CUSTOMER CARE FOR PROBLEMS AND QUESTIONS.
WE WILL RESPOND WITHIN 1 BUSINESS DAY.
WARRANTY
CONTACT / TAOTRONICS CUSTOMER CARE
Sunvalleytek USA, Inc.
Address: 46724 Lakeview Blvd, Fremont, CA 94538
E-mail: [email protected](US)
[email protected](CA)
[email protected](UK)
Tel: [phone] (Monday-Friday: 9:00 – 17:00 PST)
Website: HYPERLINK "http://www.taotronics.com" www.taotronics.com
17

www.taotronics.com