Target Atom Colour Me Dots User manual

IMPORTANT:
RETAIN FOR FUTURE REFERENCE,
READ CAREFULLY
Atom
Walker
Colour Me Dots
#022010-364

ALWAYS use the safety locks once the walker height is correctly adjusted.
Check that all safety locks are engaged before placing child in the walker.
This walker should not be used by a child who can walk unaided.
This walker should not be used by a child weighing less than 7kgs and 65cm in height.
A child should discontinue using this walker when weighing more than 11kgs and 80cm in height.The walker is not suitable for babies
under 6 months of age.
Electrical cords,heaters,replaces and other hot objects,or any other objects or substances that may be dangerous,should be guarded or
put out of reach of a child using the walker.
Promptly replace any broken parts.
The walker should not be used (whether indoors or outdoors) on surfaces that have any obstuctions that could cause the walker to tip over.
The walker should not be carried with a child in it.
Adjust the height of the walker so that both feet of a child in the walker should be able to touch the ground.
Care must be taken while folding and unfolding the walker to prevent ngers being caught.
Keep medication,strings,elastics and small toys out of reach from any position of the walker.
This walker should be used only for short periods of time eg:20mins
Battery safety information
In exceptional circumstances,batteries leak uids that can cause a chemical burn injury or ruin your product.To avoid leakage:
• DO NOT mix old and new batteries or batteries of different types:alkaline,standard (carbon zinc) or rechargeable (nickel-cadmium).
• Insert batteries as indicated inside the battery compartment.
• Remove batteries during long periods of non-use.Always remove exhausted batteries from the product.Dispose of batteries safely.
• DO NOT dispose of this product in a re.The batteries inside may explode or leak.
• Never short-circuit the battery terminals.
• Use only batteries of the same equivalent type,as recommended.
• DO NOT charge non-rechargeable batteries.
• Remove rechargeable batteries from the product before charging.
• If removable,rechargeable batteries are used,they are only to be charged under adult supervision.
Read all instructions before assembly and use of the walker.
Keep instructions for future use.
ALWAYS FOLLOW THE MANUFACTURER’S INSTRUCTIONS.
NEVER LEAVE CHILD UNATTENDED.ALWAYS KEEP CHILD IN VIEW WHILE IN WALKER.
USE ONLY ON FLAT SURFACES FREE OF OBJECTS THAT COULD CAUSETHE WALKER TO TIP OVER.
TO AVOID BURNS, KEEP THE CHILD AWAY FROM HOT LIQUIDS, RANGES, RADIATORS, SPACE HEATERS, FIREPLACES,
ETC.
DO NOT USE THE WALKER IF IT IS DAMAGED OR BROKEN.
DO NOT USE UNTIL BABY CAN SIT UP BY ITSELF.
TO AVOID SERIOUS INJURY OR DEATH, BLOCK STAIRS/STEPS SECURELY BEFORE USING WALKER.
CLEAN (FRICTION COMPONENTS) REGULARLY TO MAINTAIN STOPPING PERFORMANCE.
REMOVE PACKAGING FROM WALKER VICINITY AFTER ITS ASSEMBLY.
SAFETY PRECAUTIONS
WARNING

Due to variations in the style and design of our products, the photographs and illustrations
shown in this instruction manual are generic, therefore product fabrics, colour and design
may vary from images shown.
Contents
Assembly contents list
Assembly / Operating instructions
How to care for your Atom walker
Congratulations on your purchase of the
Atom Walker “Colour Me Dots”
This product has been designed and developed
with safety, comfort and functionality in mind. Please
take the time to read this manual carefully before
using this product and keep it in a safe place for
future reference.
CONGRATULATIONS

ASSEMBLY CONTENTS
Check what you have received...
You have received 1 box. Please check the contents of the
box against the list below. If anything is missing, please
contact Customer Service.
In Australia, contact CNP Brands on 1300 667 137, in New
Zealand contact Wainhouse Distribution on 0800 567 5000.
Supplied loose in box:
Walker Seat Padx 1 x 1
x 1 x 2
x 2
x 6
x 6
Toy Tray Front Castor
Rear Wheel
Friction Block
Screws
Friction Blocks
There are no accessories recommended for use with this Atom Walker.

ASSEMBLY / OPERATING INSTRUCTIONS
Tools required:
Phillips head
screw driver
(Not Included)
AA Batteries
required for
toy tray
(Not Included)
x 1 x 2
To assemble Wheels...
1
2
Place the two castors into position at the front
of the walker.
Ensure the two castors and two wheels are
securely fastened before using the walker.
1a.
2a.

ASSEMBLY / OPERATING INSTRUCTIONS
To assemble Friction Blocks...
To Unfold walker...
To attach Seat Pad...
1
1
1
2
Place friction block into position on the walker
base.
Raise the top tray until it locks into position.
Place the seatpad into position on the tray.
Using a phillips head screwdriver, secure the
friction block in position with one of the friction
block screws.
Secure the remaining ve friction blocks.
1a.
1a.
1a.
2a.
2b.

ASSEMBLY / OPERATING INSTRUCTIONS
To install Batteries...
1
2
Use a phillips head screwdriver to unscrew the
battery cover.
Insert two 1.5V AA batteries, ensuring correct
polarity and press plastic spring clip.
Replace cover and press clip down.
Screw battery cover back on as per example
shown
1a.
1b.
2a.
To attach Seat Pad continued...
2
3
Thread the plastic tabs through the
corresponding slots in the tray.
Pull the plastic tabs through the slots until the
plastic clip is fully secured, as shown in the
image.
2a.
3a.

ASSEMBLY / OPERATING INSTRUCTIONS
To install Toy Tray...
To adjust walker Seat Height...
1
1
2
Place toy tray into position as shown in
example.
To adjust the height of the unit, ip the unit over.
Twist red button under front of tray clockwise.
Push red button in while sliding either
backwards or forwards.
To lower height, pull button forwards, to raise
height push button backwards.
Release red knob and it will automatically lock
into position.
Turn the plastic locks underneath the walker
top to secure the tray in position.
1a.
1a.
1b.
1c.
1d.
1e.
2a.

HOW TO CARE FOR YOUR WALKER
Cleaning
Maintenance
To ensure the long-lasting use of your walker wipe
down with a damp cloth and use a mild soap solution if
necessary. Do not use abrasive cleaners. Always store
product in a clean dry place.
Always check parts regularly for tightness of screws, nuts
and other fasteners – tighten or replace if required. To
maintain the safety of your walker, seek prompt repairs
for bent, torn, worn or broken parts. Use only those parts
and accessories approved by Service Department.
If you have any diculties in assembling the baby walker,
please contact our Service Department.
In Australia, contact CNP Brands on 1300 667 137, in New
Zealand contact Wainhouse Distribution on 0800 567
5000.

Made in China
target.com.au