TasmanEco Bookleaf cot User manual

Bookleaf cot
RECYCLED
Save the instructions for future reference.
Assembly of this furniture is best undertaken by two people.
Assembly Instruction
Packaging and instructions
printed on recycled materials
Care & Cleaning Tips:
For general dusting / cleaning - periodically wipe the cot with a dry soft cloth. To remove day to
day spills or dirt, wipe down with a soft cloth and mild solution of warm soapy water. Avoid
scourers and steel wool as these will damadge the finish. Always dry the cot after cleaning.
Tasman Eco Pty Ltd abn. 58 106 988 578
4-6 Merr y vale Rd, Minto, NSW 2566
t. 02 9603 5000 f. 02 9603 7000
e. ser [e-mail] p.o.
box 5878 Minto, DC, NSW 2566
w.w w w.tasmaneco.com.au

Base x 1 Side panel x 2
M6 x 70mm Bolt x 8 M6 x 60mm Bolt x 4 M6 x 22mm Metal cross dowel x 4 M6 x 15mm Bolt x 24
Bracket x 4
M6 x 15mm Cap screw x 4
Leg x 4Headboard x 2
Parts List
Safety Consideration for your Child.
Recommended Mattress Size.
· This cot has been manufactured for use with a mattress which measures 690 mm wide x 1300 mm long x 120 mm thickness
(Max thickness is 120mm). The width and length are specified because it is IMPORTANT that the gaps between the mattress
and sides and ends of the cot do not exceed 40 mm when the mattress is pushed to one side or end, and 20mm when the
mattress is centred in the cot.This is to minimise the risk of a child’s limb becoming caught in the gap. The thickness of the
mattress had been specified to ensure that the depth of the cot is greater than 500mm with the mattress base in the lower
psoition to minimise the risk of a child climbing or falling out of the cot .
Safety Consideration for Cot.
· Re-tighten all connector bolts (at least two months after assembling the cot), as some may loosen as the cot settles.
Regulary check all of the connecting bolts, making sure they are tight.
·
Follow the manufacturer’s assembly instructions in detail to ensure the safety features of the cot are not compromised.
·
ENSURE THE COT IS NOT PLACED TOO CLOSE TO HEATERS, BLINDS, CURTAINS, WINDOWS OR POWER POINTS.
·
DO NOT HANG ANYTHING NEARBY WHERE THERE IS A POTENTIAL DANGER OF THE ITEM FALLING INTO THE COT.
·
KEEP ANY MEDICATION, STRING, ELASTIC, SMALL TOYS OR SMALL ITEMS SUCH AS MONEY OUT OF REACH FROM
ANY POSITION IN THE COT. It is advisable to keep all items out of your child’s cot to prevent suffocation or strangulation.
·
TO PREVENT FALLS, THE BASE OF THE COT SHOULD BE ADJUSTED TO THE LOWEST POSITION BEFORE YOUR
CHILD CAN SIT UP.
·
WHEN CONVERTING THE COT TO A JUNIOR BED,THE SIDE RAILS SHOULD BE INSTALLED TO PREVENT FALLS.
·
2
!""#$ %#& '(
!!"#$%&'%( )*")+ ),- .,' /"&+0"11 20 3&0"%1 4,20-1 &05 3&0"%16 7. &0( /"&+0"11"1 &'" .,$058 '"3,'- 299"52&-"%( -,
:&19&0 ;), <2&= ///6-&19&0"),6),96&$
!>, 0,- $1" ),- 2. 2- *&1 ?""0 5&9&#"5 20 &0( /&( &05 &%/&(1 $1" #"0$20" :&19&0 ;), 3&'-16 @,0-&)- (,$' 0"&'"1-
:&19&0 ;), 1-,)+21- ,' ,'2#20&% 3%&)" ,. 3$')*&1" .,' 13&'" 3&'-16
Due to the heavy nature of the cot, it is recommended assembly is undertaken by two people.
To avoid damage the cot, please useprovided allenkey andscrew driver onlywhenyou are assembling.
Warning
H!"#$!"% &'%&()*+,

3
1
2
Attach the brackets on the headboard secure with M6 x15mm bolts.
M6 x 15mm Bolt x12
Bracket x 4
Connect the legs on the brackets secure with M6 x 15mm bolts.
M6 x 15mm Bolt x8

4
3
!
4
Connect the base to headboard secure with M6 x 60mm bolts and metal cross dowels.
M6 x 60mm Bolt x 4
Metal cross dowel x 4
Fix M6 x15mm bolts and cap screws to unused holes.
M6 x 15mm Cap screw x 4
M6 x 15mm Bolt x 4

5
6
5
Connect side panels to headboards secure with M6 x 70mm bolts!
M6 x 70mm Bolt x 8
Check all the bolts and screws are tighten but do not over tighten. Insert the recommanded mattress
and cot is completed.

Guarantee & Warranty
.
Our goods come with guarantees that cannot be excluded under the Australian Consumer Law. You are entitled to a replacement
or refund for a major failure and for compensation for any other reasonably foreseeable loss or damage. You are also entitled to
have the goods repaired or replaced if the goods fail to be of acceptable quality and the failure does not amount to a major failure.
The guarantee described below is in addition to the guarantee provided by law.
Note: In situations where a person purchases this product for the purpose of gifting to another, the recipient is considered to be the
original owner.
CONDITIONS:
1.The item is improperly assembled or adjusted and or not assembled strictly in accordance with the written instructions provided
by the seller in the box containing the item.
4.The item is transferred, gifted or disposed of by the original owner to another.
WARRANTY CLAIM PROCEDURE:
For warranty claims, please email us via our claims section on our website www.tasmaneco.com.au or visit the store where the
product was purchased.
Tasman Eco Pty Ltd ABN. 58 106 988 578
4-6 Merryvale Rd ,Minto ,NSW 2566
PH: 02 9603 5000 FAX: [phone]
w.www.tasmaneco.com.au
Email: ser[email protected]om.au
The replacement product will be identical to the originally purchase product wherever possible, though in situations where the
identical model is discontinued or out of stock, then Tasman Eco Pty Ltd will replace the product with amodel that is functionally
equivalent
This Guarantee is made to the purchaser and/or original owner only. For purposes of this Guarantee, the original owner is
considered to be the person who first makes use of the product.
2.There is damage to the product and that damage is deemed by Tasman Eco Pty Ltd to be caused by incorrect assembly, misuse
or by use or storage outside of the physical or environmental specifications of the product.
3.There are modifications to the product or to parts of the product that were not authorized in writing by Tasman Eco Pty Ltd.
The product must be returned to Tasman Eco Pty Ltd or to the place of purchase with proof of purchase, including date
and purchase price.
2YEAR MATERIALS AND WORKMANSHIP GUARANTEE
If within 2years of thedateof purchase of this product, there is found anydefect in materialsor workmanshipof this product,
Tasman Eco Pty Ltdwillreplace the product free of charge, subject to the conditionbelow:
The 2Year Material and Workmanship Guarantee will be void and nullified in circumstances where: