Tatung KDRC-588 User manual

1.1 Securely screw cam bolts (A) into
the panel (1) and panel (2).
BOLT
CAM A
2
2.1 Attach panel (4), (5), (6) onto panel (2) by
aligning each cam bolt to its corresponding hole.
6
2
4
MODEL # KDRC-588
ASSEMBLY INSTRUCTION
TATUNG UTILITY CENTER CABINET
REMOVE ALL ITEMS FROM THE BOX 1-2 AND BOX 2-2. VERIFY ALL PIECES BEFORE ASSEMBLY
6
STEP 1
7
2
COMPONENTS
4
Cam x 16 Cap x 16
Cam Bolt x 16
BOX 1 OF 2: (4), (5), (6), (7), (A), (B), (C), (D), (E), (F), (G), (H), (I)
BOX 2 OF 2: (1), (2), (3).
Bushing x 1
STEP 2
Screw x 19 Tool x 1
HARDWARE
AC
Cam Bolt x 2 Cam x 2 Wood Dowel x 2
B
DEF
HI
G
1
3
5
5
1

5.1 Attach back panel (3) by tightening screw
(D) into the pre-drilled holes of back panel (3).
5.2 Snap in the bushing (F) on the top hole of
panel (3).
3.1 Attach panel (4), (5), (6) onto panel
(2) by aligning each cam bolt to its
corresponding hole.
STEP 5
Tool needed
4.1 Insert cam (B) into holes in panel (4), (5), (6) with
notch on cam facing head of cam bolt (A).
4.2 Tighten cam (B) approximately 1/2 turn clockwise
until snug
4.3 Press cap (C) into cam (B).
STEP 6
CAP
CAM
C
B
NOTCH
1/2 TURN
CLOCKWISE
STEP 4
(OPTION)
THE 5/16" SLOTTED
TOOL HAS THE BEST
RESULT TO TIGHTEN
CAMS.
5/16"
slotted
6.1 After placing refrigerator in cabinet,
remove the protection cardboard.
7
Install this cross bar ONLY
using hardware (G), (H), (I)
when you install the Tatung
refrigerator model TR-4RD
series into this cabinet.
D
F
3
62
STEP 3
4
1
5