Taurus BT-VC 1500 SA User manual

Note: Thepleatedlterneeds
tobechangedperiodically.
Frequencyofchangingdepends
onuseandmaterialbeing
vacuumed.

For blowing, connect the suction hose to the blow connector as shown in Figure 1.
Plug in the vacuum cleaner and switch the ON/ OFF switch to position I: ON as shown in Figure 3.
Always pull out the mains power plug before starting any cleaning work.
Disconnect the suction hose.
Undo the locking hooks on both sides and lift the head out of the container
(Figure 3).
Empty the container (Figure 4).
Clean the foam lter with a little soft soap under running water
and allow it to air-dry (Figure 5).
Clean the pleated lter regularly by carefully patting it and cleaning
it with a ne brush or hand
Note: The pleated lter needs to be changed periodically. Frequency of
changing depends on use and material being vacuumed.