Taylor-Dunn RE-380-36 Operating manual

The Best Way
To Go
About Your
Business
®
Serial number Starting: 155932
MANUAL MR-380-28
Operation, Troubleshooting and
Replacement Parts Manual
Models Inlcuded:
RE-380-36 (R 380-36)
RE-380-48 (R 380-48)
Equipped with the GT Drive System
Published: 1/6/2005
Revision: D
Typical GT Drive

Taylor-DunnContactinformation
Service, Parts, Sales:
Taylor-Dunn has a network of dealers distributed around the globe to support our
vehicles. Information regarding vehicle sales, replacement parts, or service should be
obtained through your local dealer. A dealer locator can be found on the Taylor-Dunn
website at www.taylor-dunn.com.
If you do not have access to the internet, you can call the factory direct at:
01(714)956-4040
Feedback regarding this or any Taylor-Dunn vehicle manual can be sent to:
Taylor-Dunn Manufacturing
Attn:TechWriter
2114 West Ball Road
Anaheim,CA92804

Appendix B
Appendix B Page-6
T
A
Y
L
O
R
-
D
U
N
N
T
h
e
B
e
s
t
W
a
y
T
o
G
o
A
b
o
u
t
Y
o
u
r
B
u
s
i
n
e
s
s
R
A small sample of the many types of vehicles offered by Taylor-Dunn®
B 2-48-36 Equipped with optional
hydraulic dump bed
BT 2-80 Eight passenger tram
B 1-00 Personnel carrier
C 4-25 Huskey tow tractor
MX 1600 Equipped with optional
ladder rack and weld tanks

Section Index
Introduction 1
Safety Rules and Operating Instructions 2
General Maintenance 3
Front Axle Service 4
Steering Component Service 5
Brakes Service 6
Motor Service 7
Transaxle Service 8
Suspension 9
Tires and Wheels 10
Battery Service 11
Control System Troubleshooting 12
Battery Chargers 13
Wire diagram 14
Illustrated Parts 15
Appendix A
Special Tools 16
Appendix B
Suggested Torque Values 17
Appendix C
Brake Lining Handling Precautions 18
Taylor-Dunn®
Model RE-380-36, RE-380-48
Operator and Service Manual Section Index
This quick reference section index guide will assist you in
locating a desired topic or procedure.
Refer to each sectional Table of Contents for the page
number location for specific topics or procedures.

Introduction
About this manual .........................................2
Who Should Read This Manual ....................3
Responsibilities.............................................3
How To Use This Manual ..............................4
Conventions .............................................................5
How to Identify Your Vehicle.........................6
Taking Delivery of Your Vehicle ....................7
Contents

INTRODUCTION
Introduction Page-2
ABOUT THIS MANUAL
The purchase of this vehicle shows a belief in high quality products manufactured in the USA.
Taylor-Dunn®, a leading manufacturer of electric burden and personnel carriers since 1949, wants to be
sure this vehicle provides years of reliable service. Please continue to read this manual and enjoy this
high quality Taylor-Dunn®vehicle.
This manual is to serve as a guide for the service, repair, and operation of Taylor-Dunn®vehicles and is
not intended as a training guide. Taylor-Dunn®has made every effort to include as much information as
possible about the operation and maintenance of this vehicle.
Included in this manual are:
•Vehicle Description
•Safety Rules and Guidelines
•Operational Information
•Operator Responsibilities
•Owner Responsibilities
•Control Operation and Location Information
•Maintenance and Troubleshooting Information
•Standard Parts List
Beforeservicing, operating,training orperforming maintenanceon thisor anyother Taylor-Dunn®vehicle,
read the appropriate Taylor-Dunn®manual.
Each Taylor-Dunn®manual references the applicable models and serial numbers on the front cover.
Please, be aware of all cautions, warnings, instructions, and notes contained in this manual.

INTRODUCTION
Introduction Page-3
WHO SHOULD READ THIS MANUAL
This manual is intended for use by anyone who is going
to operate, own, perform maintenance on, service, or
order parts for this Taylor-Dunn®vehicle. Each person
shouldbefamiliar with theparts of thismanualthat apply
to their use of this vehicle.
RESPONSIBILITIES
Of the Owner...
The owner of this or any Taylor-Dunn®vehicle is responsible for the overall maintenance and repairs of
the vehicle, as well as the training of operators. Owners should keep a record of conducted training and
maintenance performed on the vehicle. (OSHA Regulation, 29 CFR 1910.178 Powered Industrial Truck
Operator Training).
Of the Operator...
The operator is responsible for the safe operation of the vehicle, preoperational and operational checks
on the vehicle, and the reporting of any problems to service and repair personnel.
Of the Service Personnel...
The service personnel are responsible for the service and maintenance of the vehicle. At no time
should a service person allow any untrained personnel to service or repair this or any Taylor-Dunn®
vehicle. For the purposes of training, a qualified service person may oversee the repairs or services
being made to a vehicle by an individual in training. At no time should an untrained individual be
allowed to service or repair a vehicle without supervision. This manual is not a training guide.
Of the Passengers ...
The passengers are responsible to remain fully seated, keeping their hands, arms, and legs inside the
vehicle at all times. Each passenger should be fully aware of the vehicle’s operation. All forms of
recklessness are to be avoided. Do not engage in horseplay.

INTRODUCTION
Introduction Page-4
HOW TO USE THIS MANUAL
This manual is organized into five main sections:
INTRODUCTION
This section describes how to use this service manual and how to identify your vehicle.
Safety Rules and Operating Instructions
This section outlines the safety and operational issues, location and operation of controls, and the
operational checks that are to be performed on this vehicle. It also includes various subjects that should
be included in the operator and service training program.
Maintenance Service and Repair
This section gives specific information on the servicing of the vehicle and a schedule for maintenance
checks.
Electrical and Charger Troubleshooting
Thissection identifiesthe troubleshootingprocedures fortesting theelectrical systemand batterycharger.
Illustrated Parts
This section provides an illustrated view of various assemblies. The illustrations are accompanied by
tables identifying the parts.

INTRODUCTION
Introduction Page-5
A shaded box with the word “Warning” on its left denotes a warning.
A warning alerts the reader of a hazard that may result in injury to
themselves or others. Be sure to follow any instructions contained
within a warning and exercise extreme care while performing the
task.
or,
The symbol at the left and the bold text contained within a box
denotes a “Caution” and is used to inform the reader that property
damage may occur. Be sure to exercise special care and follow any
instructions contained with in a caution.
NOTE: Alerts the reader to additional information about a subject.
Conventions
Symbolsand/orwords thatareused todefine warnings, cautions,instructions, or notesfound throughout
this manual:

INTRODUCTION
Introduction Page-6
HOW TO IDENTIFY YOUR VEHICLE
This manual applies to vehicles with the same model and serial numbers listed on the front cover.
These vehicles are designed for driving on smooth surfaces in and around facilities such as industrial
plants, nurseries, institutions, motels, mobile home parks, and resorts. They are not to be driven on
public highways.
This vehicle is not designed to be driven on public roads or highways.
It is available in maximum designed speeds ranging from 7 to 15 mph.
Do not exceed the maximum designed speed. Exceeding the maximum
designed speed may result in steering difficulty, motor damage, and/
or loss of control. Do not exceed locally imposed speed limits. Do not
tow at more than 5 mph.
Thisvehicleconforms to requirementsfor Type Evehicles as describedin O.S.H.A. StandardSection29
CFR 1910.178 (Powered Industrial Trucks) and with all applicable portions of the American National
Standard for Personnel and Burden Carriers (ANSI B56.8).
The locations of the model and serial numbers are illustrated below:
Metal Tag
Vinyl Tag