TC-Helicon Perform-V User manual

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22

SWITCH-3
1 2 3
+
+
+
E60542611
Headphone volume
White = Off
Green = On
Hold an effect button
to enter edit mode.
After the effect level reaches maximum, the LED
ring resets and changes the style (sound) of the
effect. The LED color also changes for each style.
Turn the control knob. The
effect volume increases as
the LED segments fill.
Tone automatically
and dynamically adds
EQ, compression, de-
essing and gating to
your voice.
Anti-Feedback helps
to eliminate squealing
from your speakers.
After all EQs have
been used, Anti-
Feedback will turn
down the level.
To prevent
feedback, place the
mic behind your
main speakers.
Pitch correction
“nudges” you to the
nearest semi-tone.
It won’t make a bad
singer good, but it
will subtly make your
pitch more accurate.
Hold 2 seconds
Hold 2 seconds
YOU WILL NEED…
A Preset is a group of
effects used to create
an overall sound.
Changes made to
Presets are saved
automatically.
If you have a
condenser mic,
MP-75 or MP-76,
you will need to turn
on +48V for it to work.
Talk mode bypasses
all of the effects so
you can talk to the
audience.
Tap in time with your
music to set the
tempo for Echo.
Tempo is global and
not stored within the
Presets.
QUICK GUIDE
OR
Sing loud!
www.tc-helicon.com/products/perform-v/support/
www.tc-helicon.com/products/voicesupport/
support.tc-helicon.com
Switch-3 MP-76 MP-75
Audience
www.tc-helicon.com/products/perform-v/support/
Flat Correct Sharp
5 FX ON/OFF
2
6 PRESETS
3 SET GAIN 4 A
10 FX BYPASS
13 B EFFECT EDITING
16 B “BEAM” NEW SOUNDS
FULL MANUAL SUPPORT/FORUMS
11 TAP TEMPO
14 PITCH METER
17 UPDATES & PRESETS
12 CONDENSER MIC
15 MUSIC IN
18 STAGE SETUP
7 AUTO EQ 8 ANTI-FEEDBACK 9 PITCH CORRECTION
13 A EFFECT EDITING
16 A GET THE APP
19 ACCESSORIES
4 B
1
TC-Helicon Perform V Quick Start Guide PRINT MASTER.indd 1 2015-05-26 02:22