TCL MS09-LA Series User manual

TCL
SERVICE MANUAL
L32D50-MS09A-LA
1
ǃ
Caution
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
2
2
ǃ
Specification
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
6
3
ǃ
Alignment Procedure
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
7
4
ǃ
Block Diagram
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ ĂĂĂĂĂ
5
ǃ
Schematic Diagram
ĂĂĂĂĂĂĂĂĂĂĂĂĂ ĂĂĂĂĂĂĂĂ
6. Explode View Diagram
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
7. BOM LIST
ĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂĂ
This manual is the latest at the time of printing, and does not
include the modification which may be made after the printing, by
the constant improvement of product

CA UTION: TO RE DUCE THE RIS K OF
ELECTR ICA L SHOCK, DO NOT RE MOVE
COVER (OR BACK). NO USER SERVICEABLE
PAR TS INSIDE . RE FER SER VIC ING TO
QUALIFIE D SERVICE PERSONNEL.
The lighting flash with arrowhead symbol, with an equilateral triangle is intended to
alert the user to the presence of uninsulated voltage within the products
enclosure that may be of sufficient magnitude to constitute a risk of electric shock to
the person.
The exclamation point within an equilateral triangle is intended to alert the user to the
presence of important operating and maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION:
Use of controls, adjustments or procedures other than those specified herein may result in
hazardous radiation exposure.
CA U T ION
RISK
RISK
OF
ELECTRI
ELECTRI
C
SHOCK
SHOCK
DO
NOT
NOT
OPEN.
OPEN.
2
dangerous
WARNING: TO REDUCE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT
EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
SCHNEIDER ELECTRONICS GMBH-GERMANY
1. CAUTION
2

1. When the power cord or plug is damaged or frayed, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
2. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
3. Do not allow anything to rest on or roll over the power cord, and do not place the TV where power cord is subject to
traffic or abuse. This may result in a shock or fire hazard.
4. Do not attempt to service this television set yourself as opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service personnel.
5. Never push objects of any kind into this television set through cabinet slots as they may touch dangerous voltage
points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on the television set.
6. If the television set has been dropped or the cabinet has been damaged, unplug this television set from the wall outlet
and refer servicing to qualified service personnel.
7. If liquid has been spilled into the television set, unplug this television set from the wall outlet and refer servicing to
qualified service personnel.
8. Do not subject your television set to impact of any kind. Be particularly careful not to damage the picture tube surface.
9. Unplug this television set from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.
10.1. Do not place this television set on an unstable cart, stand, or table. The television set may fall, causing serious injury
to a child or an adult, and serious damage to the appliance. Use only with a cart or stand recommended by the
manufacturer, or sold with the television set. Wall or shelf mounting should follow the manufacturer s instructions, and
should use a mounting kit approved by the manufacturer.
10.2. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces
may cause the appliance and cart combination to overturn.
CAUTION:
Read all of these instructions. Sa ve these instructions for later use . Follo w all Warnings and
Instructions marked on the audio equipment.
1. Read Instructions-All the safety and operating instructionsshouldbe read before the productis operated.
2. Retain Instructions- The safety and operating instructions should be retained for future reference.
3. Heed Warnings- All warnings on the product and in the operating instructions should be adhered to.
4. Follow Instructions- All operating and use instructions should be followed.
3
SCHNEIDER ELECTRONICS GMBH-GERMANY
IMPORTANT SAFETY INSTRUCTIONS
FOR YOUR PERSONAL SAFETY
3

11. Do not use this television set near water ... for example, near a bathtub, washbowl, kitchen sink, or laundry tub, in a
wet basement, or near a swimming pool, etc.
Never expose the set to rain or water. If the set has been exposed to rain or water, unplug the set from the wall
outlet and refer servicing to qualified service personnel.
12. Choose a place where light (artificial or sunlight) does not shine directly on the screen.
13. Avoid dusty places, since piling up of dust inside TV chassis may cause failure of the set when high humidity persists.
14. The set has slots, or openings in the cabinet for ventilation purposes, to provide reliable operation of the receiver, to
protect it from overheating. These openings must not be blocked or covered.
Never cover the slots or openings with cloth or other material.
Never block the bottom ventilation slots of the set by placing it on a bed, sofa, rug, etc.
Never place the set near or over a radiator or heat register.
Never place the set in enclosure, unless proper ventilation is provided.
15.1. If an outside antenna is connected to the television set, be sure the antenna system is grounded so as to provide some
protection against voltage surges and built up static charges, Section 810 of the National Electrical Code, NFPA No.
70-1975, provides information with respect to proper grounding of the mast and supporting structure, grounding of the
lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna discharge unit, connection
to grounding electrode, and requirements for the grounding electrode.
15.2. Note to CATV system installer : (Only for the television set with CATV reception)
This reminder is provided to call the CATV system attention to Article 820-40 of the NEC that provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding
system of the building, as close to the point of cable entry as practical.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric lights or power
circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care
should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
17. For added protection for this television set during a lightning storm, or when it is left unattended and unused for long
periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage due to lightning
and power-line surges.
ANTENNA
LEAD- IN WIRE
ANTENNA DISCHARGE
UNIT (NEC SECTION
810-20)
GROUNDING
CONDUCTORS
(NEC SECTION810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250. PART H)
ELECTRIC SERVICE
EQUIPMENT
GROUND CLAMP
NEC-NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER
NATIONAL ELECTRICAL CODE
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE INSTRUCTIONS
a built-in
installer s
4
SCHNEIDER ELECTRONICS GMBH-GERMANY
PROTECTION AND LOCATION OF YOUR SET
PROTECTION AND LOCATION OF YOUR SET
4

18. This television set should be operated only from the type of power source indicated on the marking label.If you are not
sure of the type of power supply at your home, consult your television dealer or local power company. For television
sets designed to operate from battery power, refer to the operating instructions.
19. If the television set does not operate normally by following the operating instructions, unplug this television set from the
wall outlet and refer servicingto qualified service personnel. Adjust only those controls that are covered in the operating
instructions as improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the television set to normal operation.
20. When going on a holiday : If your television set is to remain unused for a period of time, for instance, when you go on
a holiday, turn the television set and unplug the television set from the wall outlet.
21. If you are unable to restore normal operation by following the detailedprocedurein your operatinginstructions,
do not attempt any further adjustment. Unplug the set and call your dealer or service technician.
22. Whenever the television set is damaged or fails, or a distinct change in performance indicates a need for
service, unplug the set and have it checked by a professional service technician.
23. It is normal for some TV sets to make occasional snapping or popping sounds, particularly when being
turned on or off. If the snapping or popping is continuous or frequent, unplug the set and consult your
dealer or service technician.
24. Do not use attachments not recommendedby the television set manufacturer as they may cause hazards.
25. When replacementparts are required,be sure the service technicianhas used replacement parts specified
by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions
may result in fire, electric shock, or other hazards.
26. Upon completion of any service or repairs to the television set, ask the service technician to perform
routine safety checks to determine that the television is in safe operating condition.
off
5
SCHNEIDER ELECTRONICS GMBH-GERMANY
OPERATION OF YOUR SET
IF THE SET DOES NOT OPERATE PROPERLY
FOR SERVICE AND MODIFICATION
5

TCL MULTIMEDIA
LCD TV SPECIFICATION RELEASE
Version: V1.0 Issued Date: 2012.4.23
PICTURE
Panel Size (inch) 32"
Category LCD TV
Aspect Ratio 16:9
Color Temperature Medium/Warm/Cool SIGNAL FORMAT CAPABILITY
Backlight Adjustable Yes Component Video Format Y,Pb/Cb,Pr/Cr:up to 1080P
Zoom Mode Auto/4:3/16:9 /Zoom1/Zoom2/Just Scan/Panorama DVI Video Format Yes
Picture Effect 4 picture effects preset (Standard/Bright/Mild/User) HDMI Video Format SD,HD,VGA;up to 1080P
Film Mode (3:2/2:2 pull down) Auto PC Compatibility VGA,SVGA,XGA etc.
Picture Enhancement TERMINALS
Comb Filter 3D
Core Technology High-quality scaling engine & 3D video de-interlacer
CCS X S-Video Input X
DCDiTM XAudio Input for S-Video X
Blue Stretch Yes YPbPr Inpu
t
1
Black Stretch Yes Audio Input for YPbPr 1
Motion Compensation Yes YCbCr Input Share with for "YPbPr"
DLTI Yes Audio Input for YCbCr Share with for "YPbPr"
DCTI Yes VGA Input(RGB) 1 (D-Sub,15 Pins)
Dynamic Skin Correction Yes Audio Input for RGB Share with for"YPbPr"Audio Input
DNR Yes(Off/Low/Middle/High/Auto) DVI Share with HDMI
Panel Specification Audio Input for DVI Share with for"YPbPr"Audio Input
Back light Unit LED HDMI 1.3/1.4 2
Panel supplier CS1˄4A-LCD320-CS1˅Audio/CVBS Output (Composite) 1
Aspect Ratio 16:9 SPDIF 1
Panel Size (inch) 32 Headphone Output X
Display Resolution 1366*768 RF Input(Antenna) 2 (Antenna,Cable) F Type
Brightness (cd/m2) 300 USB 2.0 2(at side)
Contrast Ratio 4000:1
Response Time 6.5ms Basic Info.
Viewing Angle (H/V)
178
°
/178
°
TV System
NTSC
-
M,PAL M/N
Audio/CVBS Input (Composite)
1 AUDIO R/L+1 Video: AV1IN
1 AUDIO R/L+1 Video:AV2 IN(at side)
Model: LED32D50/MS09A-LA
Viewing Angle (H/V)
178 /178
TV System
NTSC
-
M
,
PAL M/N
Life Time 30000hrs (Typ.) DTV System ISDB-T
Color 16.7M AV System PAL,NTSC
SOUND Channels(analog) Antenna˖269˗CATV˖1125
Speakers Integrated speakers (Two mediant) DTV Channels(digital) Antenna˖769
Audio Power Output 5W+5W Chassis MS09A-LA
DVSS (Dolby Virtual Surround) X Certification CB
DDAS (Digital Dynimic Audio System) Yes Power Supply AC 100V-240V 50/60Hz )
AVC (Auto Volume Control) Yes Power Consumption-TV on 55W
BBE X Power Consumption-Standby ˘W
SRS X Default Color of Front Cabinet Black
MTS Yes(Stereo/Mono/SAP) Keyboard Position Back
Sound Features AV Stereo,Mstar Surround Base Stand Detachable Yes
Unpackaged Dimension for Main Body (L*H*D) (mm)
With Base Stand (mm) 772 x 531.4 x 211 (GLASS STAND)
Without Base Stand (mm) 772 x 479.4x 79
Function Packaged Dimension (L*H*D)
Parental Guidance Yes Main Body (mm) 914X613X177
CCD (Closed Caption) Yes Speaker Box X
Teletext X Base Stand Packaged with ALL
Macro Vision X Net Weight (Kg) 10.3kg(Base Glass);4.8Kg(Base Plastic)
Calendar X Gross Weight (Kg) 12.3kg(Base Glass);5.6Kg(Base Plastic)
Clock/Timers Yes Container Loading
Lock Yes(Parental Guidance and Content Lock at DTV ) 20 feet 282
OSD Language English/Portuguese/Spanish 40 feet 597
OSD Features 16 Bit COLOURS 40 feet high 667
REC Yes(at DTV) ACCESSORIES
GUIDE Yes(at DTV) Operation Manual English(Default)
AUDIO Language Yes(at DTV) Remote Control Mode RC200 (with two 7# batteries)
Screen Saver Yes Base Stand Integrated Packaging
Melody Yes Speaker Box Integrated
Software Upgrade Yes(By USB) Wall Mount Optional(TBD)
Game
X
Others
A
C Power cord
USB Connection Yes.Movie /Music/Photo/ Text
Demo function X
Hotel In factory mode
Other Functions --
Design and specifications are subject to change without notice!
Page1of1
Approved by:
Drafted by: CHENGB
Sound Control Volume, Balance,5 Band EQ, 5 mode presets
(Movie/Sports/Standard/Music/User)
D
es
i
gn an
d
spec
ifi
ca
ti
ons are su
bj
ec
tt
o c
h
ange w
ith
ou
t
no
ti
ce
!
P
age
1
o
f1

Factory Alignment Specification


OEM Business Unit
OEM R&D Center

Alignment Procedure

˄02'(/˅˖06/$6HULHV
VERSION˖V1.0
PREPARED BY : LIYAJIAN DATE : 2011-10-29
APPROVED BY : DATE:
Factory Alignment Specification for MS09-LA (Page 1 of 11)

Factory Alignment Specification
Factory Alignment Specification for MS09-LA (Page 2 of 11)
History Description of major changes Release Date
V1.0 NEW 2011-10-29
2YHUYLHZ
06FKDVVLVLVD/$/&'SODWIRUPZLWK,6'%7WKHPDLQFKLSLVIURP
067$506'3;DQGVXSSRUWVEHORZLQSXWV
g2QHDQDORJDQGGLJLWDOPL[HG5)3$/01176&0,6'%7
g7ZR+'0,6XSSRUWIURPLXSWR3
g7ZR86%6XSSRUW0RYLH0XVLF3KRWR7H[W
g7ZR$9LQSXW
g2QH&036XSSRUWIURPLXSWR3
g2QH9*$6XSSRUW9*$69*$;*$HWF
g2QH$9RXWSXW
g2QH63',)RXWSXW
g2QH+HDGSKRQH
0RUHUHOHYDQWGHWDLOVDUHOLVWHGLQWRWKH6SHF
1
1RWH
GHVLJQPHQXLQFOXGHIDFWRU\PHQXVHUYLFHPHQXKRWHOPHQXDQG
VRPHPLVFHOODQHRXV)DFWRU\PHQXDQGLWVLWHPVDUHXVHGIRUPDQXIDFWXULQJ
DOLJQPHQW6HUYLFHPHQXDQG+RWHOPHQXDUHIRUDIWHUVHUYLFH7KHGHVLJQ
PHQXLVIRURQO\5'DGMXVWPHQW
)DFWRU\0HQX
0HWKRGVRI(QWHULQJ
0HWKRG˖
3UHVV5HPRWH&RQWURONH\Ā0
0(81
āWRGLVSOD\PDLQPHQXDQGFKRRVLQJWKHĀ&
&RQWUDVW
ā
LQĀ3
3LFWXUHė3LFWXUH0RGHė8VHU
āVXEPHQX
 3UHVV5HPRWH&RQWURONH\VVHTXHQWLDOO\Ā

āĀ

āĀ

āDQGĀ

ā
Ā)
)DFWRU\0HQX
āZLOODSSHDULQWKHOHIWWRSRIVFUHHQ
0HWKRG˖

7R SRSXS )DFWRU\ 0HQX LQ FDVH RI Ā )DFWRU\ +RWNH\ ā LV

Factory Alignment Specification
Factory Alignment Specification for MS09-LA (Page 3 of 11)
HQDEOHGRQSOHDVHIROORZEHORZVWHS
3UHVV5HPRWH&RQWURONH\Ā
5(7851
ā
7RH[LWĀ
)DFWRU\0HQX
ā3UHVVĀ(
(;,7
āNH\RQ5HPRWH&RQWURO
7RFRPHEDFNWRĀ
)DFWRU\0HQX
āURRWZKHQ\RQDUHLQWRDVXEPHQX
3UHVV5HPRWH&RQWUROĀ
0(18
āNH\

*HQHUDOLQWURGXFWLRQ
)$&725<0(18
,7(06 'HIDXOW
6HWWLQJ
'HVFULSWLRQ 6WDWXV
)$&+27.(< 2)) )DFWRU\KRWNH\6ZLWFK2))216KRXOGEH2))
DIWHUIDFWRU\DOLJQPHQW
2.
:$5083 2)) 2))˖7KHVHWZRXOGHQWHUVWDQGE\PRGHDIWHU
PLQXWHVZLWKRXWLQSXWVLJQDO˗
21˖$JLQJPRGH$JLQJWLPHZLOOGLVSOD\RQWKH
OHIWERWWRPRIVFUHHQ
2.
$'& NJ $'&FDOLEUDWLRQ˄UHIHUDVIROORZ˅ 2.
:+,7(
%$/$1&(
NJ :KLWH%DODQFHGDWDDGMXVWPHQW˄UHIHUDVIROORZ˅2.

6+236(7)$&
&+
'2 3UHVHWVSHFLILFIDFWRU\FKDQQHOVIRUVSHFLILF
IDFWRU\3UHVVOHIWDQGULJKWEXWWRQWRVHOHFW
WKHIDFWRU\DQGWKHQSUHVV2.WRFRQILUP
2.
32:(5 21
02
67% 21$OZD\VWXUQVRQ79ZKHQ$&SRZHURQ
67%˖$OZD\VJRHVWRVWDQGE\PRGHZKHQ$&SRZHU
RQ
/$67˖5HVWRUHWKHVWDWXVEHIRUHWKHODVW$&SRZHU
RII
2.
86%83'$7( '2 86%XSGDWHˈ
˄UHIHUDVIROORZ˅
 2.
190UHVHW '2 6\VWHPLQLWLDOL]DWLRQ5HVWRUHDOOGDWDH[FHSW
WKH:KLWH%DODQFHDQG$'&GDWD2QO\IRU5'
2.
6+23 '2 5HVHWWKHVHWDIWHUSURGXFWLRQDOLJQPHQW7KLV
RSHUDWLRQZLOOUHPRYHDOOXQQHFHVVDU\IDFWRU\
YDOXH7KHIDFWRU\KRWNH\ZLOOEHWXUQRII
2.

Factory Alignment Specification
Factory Alignment Specification for MS09-LA (Page 4 of 11)
1RWH%HORZWKHIDFWRU\PHQXVRPHPRGHOLQIRUPDWLRQDUHVKRZHGLQFOXGLQJ
VRIWZDUHYHUVLRQ3URMHFW1DPH6,$&39HUVLRQDQG6:UHOHDVHWLPH
$'&6XEPHQX
,7(06 'HIDXOW
6HWWLQJ
'HVFULSWLRQ 6WDWXV
6RXUFH 5*%<3E3U
+'
6RXUFHVQHHGFDOLEUDWLRQ5*%PHDQV3&DQG<3E3U
+'PHDQV<3E3U
2.
5*$,1  5*$,1 2.
**$,1  **$,1 2.
%*$,1  %*$,1 2.
52))6(7  52))6(7 2.
*2))6(7  *2))6(7 2.
%2))6(7  %2))6(7 2.
$872$'& :$,72. :LWK DSSURSULDWH SDWWHUQ PHQWLRQHG EHORZ
LQSXWWHGSUHVVOHIWRUULJKWNH\WRVWDUWDXWR
FDOLEUDWLRQ
2.
:+,7(%$/$1&(6XEPHQX

,7(06 'HIDXOW
6HWWLQJ
'HVFULSWLRQ 6WDWX
V
6RXUFH &XUUHQW
6RXUFH
&XUUHQW 6RXUFH$9&RPSRQHQW3&5&%+'0,
2QO\+'0,QHHGDGMXVWPHQW
2.
&2/257(03 0HGLXP 0HGLXP&22/:$50 2.
5*$,1  5*$,1 2.
**$,1  **$,1 2.
%*$,1  %*$,1 2.
52))6(7  52))6(7 2.
*2))6(7  *2))6(7 2.
%2))6(7  %2))6(7 2.
:%,1,7 '2 21/<)257&/5' 2.
'HVLJQ0HQX
0HWKRGVRI(QWHULQJ
0HWKRG˖
3UHVV5HPRWH&RQWURONH\Ā0
0(81
āWRGLVSOD\PDLQPHQXDQGFKRRVLQJWKHĀ&
&RQWUDVW
ā
LQĀ3
3LFWXUHė3LFWXUH0RGHė8VHU
āVXEPHQX