TCL L42V6300F3DE User manual

L42V6300F3DE
OPERATION MANUAL
3D LED Edge lit LCD TV

2
Table of Contents
Chapter 1: Safety Information
Precautions ....................................................................................................................................... 3
Product .......................................................................................................................................... 3
Power and Plug ............................................................................................................................. 3
Power Cord and Signal Cable ..................................................................................................... 3
Use Environment .......................................................................................................................... 3
Cleaning ........................................................................................................................................ 3
Hanging the TV Set on the Wall .................................................................................................. 3
Important Information .................................................................................................................. 3
Chapter 2: Connections and Setup ......................................................................................... 4
Buttons on the TV ............................................................................................................................. 4
Sockets .............................................................................................................................................. 4
Remote Control Functions .............................................................................................................. 5
Switching on ..................................................................................................................................... 6
Switching off ..................................................................................................................................... 6
Initial Set-up ...................................................................................................................................... 6
Chapter 3: Menu Operation
Menu Display .................................................................................................................................... 7
Using Menu System ......................................................................................................................... 8
Picture Menu ..................................................................................................................................... 8
Sound Menu ...................................................................................................................................... 8
PAP Menu .......................................................................................................................................... 8
Options Menu .................................................................................................................................... 9
Lock Menu ......................................................................................................................................... 9
Setup Menu ....................................................................................................................................... 10
Chapter 4: Advanced Functions
View TV using the 3D function ........................................................................................................ 11
Setup your favourite channels ........................................................................................................ 11
Network Connection ......................................................................................................................... 12
Share & See ....................................................................................................................................... 12
Opera Browser .................................................................................................................................. 13
USB Functions .................................................................................................................................. 13
Time Shift .......................................................................................................................................... 14
PVR (Personal Video Recorder) ...................................................................................................... 14
Schedule List .................................................................................................................................... 15
Chapter 5: Other Information
Troubleshooting ............................................................................................................................... 16

3
Chapter 1 Safety Information
Precautions
Read all of the instructions before operating the set.
Keep these instructions well for future use.
Product
• Do not block or cover the ventilation openings on
the back cover.
• Do not push objects of any kind into this unit through
the cabinet slots as they could touch current carrying
 partsorshort-circuitparts,resultinginre,electric
shock, or damage to the unit.
• Do not attempt to open the cabinet as this may
cause damage. There are no parts inside you can
 servicebyyourself.Referallservicingtoqualied
personnel.
• Donottouchthescreensurfacewithngersasthis
may scratch or mark the TV screen.
• Do not impact the TV screen with hard pressure as
this may damage the TV screen severely.
• The appliance is not intended for use by young
 childrenorinrmpersonswithoutsupervision.
Young children should be supervised to ensure that
they do not play with the appliance.
Power and Plug
•Unplug the set under the following conditions:
- If the set will not be used for a long period of time.
- If the power cord or the power outlet/plug is
damaged.
- Follow the instructions to install and adjust the
product. Adjust those controls that are covered
in these operating instructions as improper
adjustment of other controls may result in damage.
If this happens, unplug the set and refer to the
service personnel.
- If the set is subject to impact or has been dropped
to have the cabinet damaged.
•Where the mains plug or an appliance coupler is
used as disconnect device, the disconnect device
shall remain readily operable.
Power Cord and Signal Cable
•Do not allow anything to rest on or roll over the
power cord and the signal cable.
• Protectthepowercordandthesignalcable
from being trampled.
• Donotoverloadthepowercordorthepower
outlet.
• Donotexposethepower cord and the signal
cable to moisture.
Use Environment
•Do not place the set on an unstable cart, stand, or
table.
• Placethesetonaplacethatallowsgood
ventilation.
• Donotusethesetneardamp,andcold
 areas.Protectthesetfromoverheating.
• Keep the set away from direct sunlight.
• Thesetshallnotbeexposedtodrippsorsplashes
 andnoobjectslledwithliquids,suchasvases,
shall be placed on the set.
• Do not use the set in dusty environments.
Cleaning
•Dust the set by wiping the screen and the cabinet
with a soft, clean cloth or some special liquid
cleaner.
• Donotapplyexcessiveforcetothescreenwhen
cleaning.
• Do not use water or other chemical cleaners to
clean the screen as this may damage the surface of
the TV screen.
Hanging the TV Set on the Wall
Warning: This operation requires two people.
To ensure a safe installation, observe the following
safety notes:
•Check that the wall can support the weight of the TV
set and wall mount assembly.
• Follow the mounting instructions provided with the
wall mount.
• The TV set must be installed on a vertical wall.
• Make sure to use only screws suitable for the
material of the wall.
• Make sure that the TV set cables are placed so that
there is not danger of tripping over them.
All other safety instructions about our TV sets are also
applicable here. Wall Mount Bracket not included.
Important Information
Ifatelevisionisnotpositionedinasufcientlystable
location, it can be potentially hazardous due to falling.
Many injuries, particularly to children, can be avoided
by taking simple precautions such as:
• Using cabinets or stands recommended by the
manufacturer of the television.
• Only using furniture that can safely support the
television.
• Ensuring the television is not overhanging the edge
of the supporting furniture.
• Not placing the television on tall furniture (for
 example,cupboardsorbookcases)without
anchoring both the furniture and the television to a
suitable support.
• Not standing the televisions on cloth or other
materials placed between the television and
supporting furniture.
• Educating children about the dangers of climbing on
furniture to reach the television or its controls.
Note: Graphics contained within this publication
are presentation only.

4
Buttons on the TV
1. PR-/+ (PROGRAM DOWN/UP) button
Scansdown/upthroughthechannellist.Inthemenusystem,PROGRAMDOWNactslikethedowndirection
buttonontheremoteandadjustsmenu;PROGRAMUPactsliketheupdirectionbuttonsontheremoteandadjust
menu controls.
2. VOL-/+ (VOLUME DOWN/UP) button
Decreases/increases the volume. In the menu system, they act like the left/right direction buttons on the remote
and adjust menu controls.
3. MENU ( ) button
Brings up the menu system.
4. OK/SOURCE ( ) button
Displaythesignalsourceselectionmenu.Inthemenusystem,conrmsyourselectionorchangessettings.
5. POWER ( ) button
Turns the TV on or standby. (Note: for some models, the POWER button turns the TV on or off.)
Note:
The location and names of the function buttons and power button on the TV may vary according to TV model.
Sockets
Note: the location and names of the sockets on the TV may vary according to TV model, and not all sockets available on all models.
SPDIF socket (output)
TheSPDIFsocketcanbeusedtoconnectacompatibledigitalaudioreceiver.
Headphone socket (output)
This socket can be used to connect headphones or stereo earphones.
Warning: excessive sound pressure from earphones and headphones can
cause hearing loss.
USB1 or USB2 socket (input)
These sockets can be used to connect an USB device.
Note: the number of USB sockets on the TV may vary according to TV model.
HDMI1 or HDMI2 or HDMI3 or HDMI4 socket (input)
TheHDMI(High-DenitionMultimediaInterface)socketcanbeusedtoconnecta
bluray,PCwithacompatiblevideocardinstalled,certainDVDplayersorahigh-
denitioncompatibledigitalsatellitedecoder.Thissocketprovidesanuncompressed
digital connection that carries both video and audio data by way of an integrated
mini-plug cable.
YPbPr component sockets (input) or CMP adapter socket (input)
Note:TheCMPadaptersocketcanbeusedtoconnecttheattachedCMPadapter
cablewithYPbPrcomponentsockets.TheseYPbPrsocketscanbeusedtoconnect
a device that has component video sockets, such as a DVD player. The component
socketscanrecognizeifthedeviceyou'reconnectingtoisYPbPrcompatibleorY
CbCrcompatible.Thecomponentsocketsprovideexcellentpicturequalitybecause
the video is separated into three separate parts.
COMPONENT AUDIO IN or CMP AUDIO IN adapter sockets (input)
Note:TheCMPAUDIOinadapter socket can beusedtoconnecttheattached
AUDIO in adapter cable with audio L & R sockets, and be used to obtain sound.
These AUDIO IN L & R sockets can be used to connect a range of equipment,
including video recorders, camcorders, satellite receivers, DVD players, or games
consoles.
AV RCA audio + video sockets (input) or AV IN adapter socket
Note: the AV IN adapter socket can be used to connect the attached AV adapter
cable with VIDEO and AUDIO L & R IN sockets.
The AV IN sockets can be used to connect a range of equipment, including video
recorders, camcorders, decoders, satellite receivers, DVD players, or games
consoles. The VIDEO IN socket provides composite video connection.
HEADPHONE
or
USB1 or USB2
SPDIF
or
HDMI 1 or HDMI 2
or
HDMI 3 or HDMI 4
Y
Pb/Cb
Pr/Cr
COMPONENT
IN
CMP IN
adapter
or
R
L
COMPONENT
AUDIO IN
CMP
AUDIO IN
adapter
or
L
AUDIO
VIDEO
AV IN
R
or
AV IN adapter
Chapter 2 Connections and Setup

5
Connections and Setup
AUDIO/VIDEO sockets (output) or AV adapter (output) socket
Note: The AV OUT adapter socket can be used to connect the attached AV adapter
cable with VIDEO and AUDIO L & R OUT sockets.
These AV out sockets can be used to connect a VCR to record programs. You must
leave the TV on the same channel you are recording. The VIDEO OUT socket
provides composite video connection.
VGA socket (input)
This socket can be used to connect a computer.
VGA AUDIO socket (input)
This socket provide audio connection when using VGA socket.
ANTENNA IN socket (input)
This socket can be used to connect the outside aerial or cable network.
LAN
RJ45 plug for connecting to external modem or network access equipment.
Source Brings up the signal source selection menu.
(On/Off button) Turns the TV on or standby.
0-9 (numeric buttons) Enters channel numbers.
Enters a letter, a digit or a symbol in some functions.
ECO To select desired power saving mode.
Guide Toggles the Electronic Programme Guide between on and off. Only
available for digital channels.
Menu Brings up the main menu or press to return to the previous menu; to
access or exit virtual keyboard in Opera browser function.
Exit Exits the menu system or Teletext.
▲/▼ (up, down direction buttons) Highlights different items in the menu
system and adjusts the menu controls.
To switch to the previous or next picture, song or video in USB function.
◄/► (Left and right direction buttons) Highlights different items in the menu
Zoom-/+ system and adjusts the menu controls. The right direction
button can also be used to open the corresponding submenu.
Selects the picture format.
OK Wheninthemenusystem,conrmsyourselectionorchangessettings.
To freeze/unfreeze the picture.
Option To display the function menu to perform certain operations;
To display the Teletext page in different mode.
Return Returns you to the previous channel.
In USB function, returns to the previous menu.
V+/- (VOLUME UP/DOWN) Increases or decreases the TV's volume.
Info Displays the status information of the current program, if available.
Mute Switches sound off and back on again.
P+/- (PROGRAM UP/DOWN) Scans up or down through the current
channel list and input sources.
TEXT Toggles teletext between on and off.
SUBTITLE To select a subtitle language available for selected digital TV
programme.
LIST Displays channel list.
TV To access TV mode.
Colored To select tasks or Teletext pages.
buttons
Lang To select a sound type available for selected analogue TV programme;
To select an audio language available for selected digital TV programme.
Remote Control Functions
Most of your television's functions are available via the menus that appear on the screen. The remote control supplied
withyoursetcanbeusedtonavigatethroughthemenusandtocongureallthegeneralsettings.
Zoom
+
Zoom
-
Lang
VIDEO
R
L
AV OUT
AUDIO
AV OUT
adapter
or
VGA
VGA
AUDIO IN
ANTENNA IN
LAN

6
Switching on
Follow the instructions on this page on how to switch on your TV set and the remote control before going on to
following pages describing how to use the channel set-up procedure.
1. Insert two AAA batteries in the remote control.
Precautionsonusingbatteries:
-Onlyusethebatterytypesspecied.
- Make sure you use the correct polarity.
-Donotmixnewandusedbatteries.
- Do not use rechargeable batteries.
-Donotexposebatteriestoexcessiveheatsuchassunshine,reorthelike,throwtheminare,rechargethem
ortrytoopenthem,asthiscouldcausethemtoleakorexplode.
- Remove the batteries from the remote control if you are not using it for a long period of time.
2. Connect the power cable to a mains socket. (If the power cable is not connected
tothetelevision,pleaserstconnectthepowercabletothetelevision.)
Your TV set should only be connected to an AC supply. It must not be connected
to a DC supply. If the plug is detached from the cable, do not, under any
circumstances, connect it to a mains socket, as there is a risk of electric shock.
Note: the gures are for representation only. The location of the power socket at
the back of the television might differ depending on the model.
3. Connect the outside aerial or cable network to the ANTENNA IN socket at the
back of the TV set.
Theaerialsocket(75OHM-VHF/UHF/cable)canbeusedforconnecting
anexternalaerialorotherequipmentttedwithamodulator(videorecorder,
satellitereceiver,etc.).Werecommendthatyoudonotconnectotherequipment
(videorecorder,satellitereceiver,etc.)toyourTVsettobeginwith,soasnotto
complicate the set-up procedure with the additional steps involved. Connect
themwhenyouhavenishedsettingupthechannels.
4. When powered on, the TV will be turned on directly or be in standby mode.
If the TV set is in standby mode, press on the remote control or on the TV set to turn on the TV.
Note: the location and name of the power button on the TV may vary according to TV model.
Switching off
To put the TV set into standby mode, press on the remote control or on the TV, the TV set remains powered up,
but with low energy consumption.
To switch off the TV set, unplug the mains socket from the mains outlet.
Connections and Setup
Initial Set-up
Initial set-up involves selecting all the settings required
to be able to search for and store all the channels you
can receive. Make sure that the television is switched on
andfollowallthestepsinturnspeciedhereafter.
Thersttimeyouswitchtheseton,theInitialsetup
wizard opens, which guides you through the initial setup
process.PressOKtostartyourinitialsetup.(Seegure1)
1.Press▲/▼toselectyourlanguage,thenpress
OK/►toenterthenextstep.
2.Press▲/▼toselectScan and press OK/►
to start the search automatically. All available TV
programmes are stored. This operation takes a few
minutes. The display shows the progress of the
search and the number of programs found.
Note: to prevent the channel setup process from
being interrupted, wait for the message indicating
that the setup is complete.
In this step, you can also select Skip Scan to skip
the channel search progress. But when you turn
 theTVonnexttime,thepromptonthescreenwill
 remindyoutodothechannelscanrst.
3. During the setup, user can press Exit toexitor
interrupt the search halfway. Then follow the hints
available at the bottom of the screen to return to the
 laststepbypressing◄.OrpressExittoexit.
4. Once the automatic search ends, the set enters the
nextstepautomatically.Youcanpress▲/▼toselect
your location Shop or Home.PressOK/►to
 conrmyourselectionandenterthelaststep.
Note: the Shop mode does not satisfy the MEPS
certication, suggest selecting Home.
5.- In this step, you can press OKtoexittheinitial
setup. The channels are arranged in a preset
order. If you wish to skip channels, modify the
preset order or rename channels, select Setup >
Organiser for these operations.
 -Inthisstep,youcanalsopress◄toreturntothe
previous step.

7
Menu Display
Chapter 3 Menu Operation
Initial setup
Welcome to use the Wizard for Initial Setup !!
Please press [OK] to start the wizard.
Welcome
Back
Exit
Select
Enter
Menu
Exit
OK
Setup
Language
Channel install
Organizer
Input settings
Diagnostic
Time shift
Reset shop
Off
Picture
Picture preset ECO
Brightness
Contrast
Saturation
Sharpness
Color temperature
Screen mode
Auto format
60
50
50
8
Normal
16:9 formay
On
ECO dynamic back light
Middle
Back
Exit
Select
Menu
Exit
PAP
PAP
TV position
On
Left
Back
Exit
Select
Menu
Exit
Lock
Channel lock
Parental rating
Input lock
Front panel lock
Installation lock
Max volume
Change password
Off
Off
...
Clean all
...
...
...
...
100
Back
Exit
Select
Enter
Menu
Exit
OK
Figure1 Figure2
Figure3 Figure4
Figure5 Figure6
Figure7 Figure8
Figure9
Picture
Sound
PAP
Options
Lock
Setup
Media
Internet TV
Picture
Advanced video
3D
Back
Exit
Select
Enter
Menu
Exit
OK
Options
Decoding page language West EUR
Digital teletext languageEnglish
SPDIF type PCM
SPDIF delay
T-LinkOff
Location Shop
140
Subtitle
Back
Exit
Select
Enter
Menu
Exit
OK
Timer
Network
CEC
Version Info
Sound
Sound preset
Balance 0
Auto volume control
Sound type
Wide stereo
On
Off
Stereo
...
Back
Exit
Select
Enter
Menu
Exit
OK
Audio delay 140

8
Advanced video: press OK/► to display its submenu.
Noise reduction: this setting reduces picture
“static”or any type of interference. This feature is
especially useful for providing a clearer picture in
weak analog signal conditions. Press ◄/► to choose
between these options: Low/Off/High.
Light sensor: press ◄/► to select On or Off. When
On is selected, the unit is in power saving mode and
can automatically adjust the backlight according
to the intensity of ambient light. (Note: for some
models, this option is not available. )
Note: some options may appear in the next page of
Picture menu, you can press ▲/▼ to switch.
Sound Menu
Display the main menu by press Menu and select
Sound, then press OK to confirm. The Sound menu
appears with the following options:
Sound preset: press OK/► to display its submenus:
- Sound preset: use ◄/► to select a sound type
from the list: Off, Rock, Pop, Live, Dance, Techno,
Classic, Soft and Personal.
- Frequency range: use ▲/▼ to select the desired
frequency range (100Hz, 300Hz, 1KHz, 3KHz,
10KHz), use ◄/► to adjust the level.
Balance: use ◄/► to balance the sound between the
left and right speakers.
Audio delay:If the sound output does not match
the picture, press ◄/► to adjust the delay time to
synchronize the sound with the picture.
Wide stereo: use ◄/► to switch On or Off.
Auto volume control :select On mode to reduce the
annoying blasts in volume during commercial breaks
and also amplifies softer sounds in program material.
Eliminates the need to constantly adjust the volume.
Sound type: use ◄/► to select a sound type from the list.
Note: the options offered depend on the programme you
are watching.
PAP Menu
To display the pictures from different source inputs side
by side. Note that one window is for both analog and
digital TV inputs, the other is for VGA, HDMI and CMP
inputs. (Note: AV input is invalid for both windows.)
1. Display main menu by pressing Menu. Select PAP
and press OK to conrm.
2. Select the PAP item, and press to turn on/off
PAP function.
3. When On is selected, select TV position, press the
◄/► to reposition the TV window.
Note: press ◄/► to toggle the focus window. When
focus in TV window, digit keys and PROGRAM
DOWN/UP work in TV. When focus in the other
window, PROGRAM DOWN/UP c an change available
extension sources.
Using Menu System
This section explores the menus of your TV. Each menu
is outlined and detailed to help you get the most from
your TV. To access the menu system:
1. Press Menu to display the main menu.
2. Press ▲/▼/◄/► to select the desired item, then
press OK to open the corresponding submenu.
3. In submenus, use ▲/▼ to select menu options,
use ◄/►to set functions or change values. Press
OK to activate a setting. Use OK/► to open the
corresponding submenu.
4. Press Menu to return to the previous menu or press
Exit to close the menu.
Picture Menu
The menus for adjusting the picture are used to obtain
the best picture settings according to your preference,
the type of program you are watching and the ambient
lighting.
Display the main menu by pressing Menu and select
Picture, then press OK to conrm. The Picture options
are as below:
Note: some options may be not available for certain
signal sources.
Picture preset:use ◄/► to scroll through the picture
preset settings: Vivid, Studio, Personal, Movie and
ECO.
Note: ECO is recommended home viewing mode, which
conrms to recommendation of MEPS (Minimum energy
performance standards). And the energy rating label is
performed in this mode.
Brightness: adjusts the brightness of the picture.
Contrast: adjusts the difference between light and dark
areas of the picture.
Saturation:adjusts the richness of colour. (Note: this
function is not available in VGA mode.)
Sharpness: adjusts the crispness of the edges in the
picture. (Note: this function is not available in VGA
mode.)
ECO dynamic back light: press ◄/► to select desired
power saving mode to achieve desired power saving
effect. At this time the Picture preset option under
Picture will be set to Personal synchronically.
Color temperature: adjusts the color temperature of the
picture. Use ◄/► to scroll through the color settings:
Cool for a more blue palette of picture colors; Normal;
and Warm for a more red palette of picture colors.
Screen mode:use ◄/► to select the picture size. (Note:
you are recommended to use the full screen mode. Do
not use the display mode with black bars on both sides
of the picture (such as 4:3) for long time, otherwise the
TV screen may be damaged permanently.)
Auto format: use ◄/► to select On and Off, when On
selected, the picture will display the picture according to
HD Signal's format.
Note: Auto format is available only in TV and AV mode.
Menu Operation

9
Options Menu
Display main menu by pressing Menu. Select Options
and press OKtoconrm.The Options options are as
below:
Subtitle:this enables subtitle for digital TV channels.
Select Subtitle, press OK/►todisplayitssubmenus:
Subtitle:press◄/►toturnOn or Off the subtitles.
Subtitle type:press◄/►toselectasubtitletype.
You can select Hearing impaired to display the
hearing impaired subtitle with your selected language.
Decoding page language: select Options > Decoding
page language. Select a proper type of language in
whichTeletextwilldisplay.
Digital teletext language: for digital TV channels, your
TVcouldzaptoaservicewithmultipleinitialTeletext
pages in different languages. This function allows you to
select an available language as primary language which
relatestodifferentinitialTeletextpage.SelectOptions >
Digital teletext language.Press◄/►toselect.
SPDIF type:connect to an audio device through the
SPDIF output. Select Options > SPDIF type. Select a
proper sound type from the list for digital programmes.
- If the current programme outputs sound in Dolby D
format, then either PCM or Dolby D can be selected.
- If the current programme does not output sound in
Dolby D format, only PCM can be selected.
Otherwise no sound will be output.
- Select Off to turn off the audio output from the
Audio Device connected to the SPDIF output.
Note: the options you may choose depend on the
programme you are watching. If you select PCM and
the sound output is prior to the picture, you can select
SPDIF delay from the Options menu and press ◄/►
to adjust the delay time to synchronize the sound with
the picture.
T-Link:to search for CEC devices connected to the
HDMI sockets in your TV and enable one-touch play and
one-touch standby between CEC devices.
Enable or disable T-Link
1. Select Options > T-Link.
 2.Press◄/► to select On or Off.
Use one-touch play: one-touch play enables you to
 presstheplaybuttonon,forexample,yourDVD
remote control. This starts playback on your DVD
device and automatically switches your TV to the
correct source, displaying DVD content.
Use System standby: system standby enables
you to press the buttonon,forexample,yourTV
remote control. This switches your TV and all
connected HDMI devices to standby mode.
Location:use◄/► to select Home or Shop mode.
Home mode is the default. If Shop mode selected, the
picture will be displayed in Vivid mode. In Shop mode,
you can adjust the picture mode, but when turning on
theTVnexttime,thePicture preset will restore to Vivid
mode, and a prompt about Shop mode will appear.
Timer: The Timer menu allows you to set the time zone
on your TV set, to programme an automatic turn-off or
wake-up timer and to view the calendar.
Select Options > Timer and press OK/►to confirm.
The Timer options are as below:
Time zone:use◄/►toselectthelocaltimezone.
Country region:use◄/►toselectyourregion.
Clock: press OK/►todisplayitsoptions:
Auto synchronization:use◄/►toselectOn
or Off. If On selected, the TV will get the time
automatically from DTV signals, and the Time item
cannot be adjusted. If you select Off, you should
set date and time at Date and Time item. Highlight
Date or Time,use◄/►toselectinputspace,enter
the current date or time by using the digit keys .
Note: if Off selected, the time set in Time option
will not be memorized when turning on the TV next
time, and the TV 's time will start from the default.
Power on timer:use◄/►toselect Once, Daily
or Off. If you select Once or Daily, you should
set a time period after which the TV automatically
switches to on at Timer below this item. Highlight
Timer,use◄/►to select input space,enter the
on time using the digit keys.
Power on channel: press OK/► to display its
submenu. Highlight Select mode,use◄/►to
select Last status, the power on channel will be
the last channel you watched before powered off.
Or you can select User select,thenpress▲/▼to
select the channel you want to watch when the TV
isturnedonautomaticallynexttime,andpressOK
toconrm.
Power off timer:use◄/►to selectOnce, Daily
or Off. If you select Once or Daily, you should
set a time period after which the TV automatically
switches to off at Timer below this item. Highlight
Timer,use◄/►to select input space,enter the
off time using the digit keys.
Sleep timer: sets a period of time after which the
TV set goes into standby mode. Use ◄/► to set
theperiod(120minutesmaximum).Todisablethis
function, select Off.
Lock Menu
This menu can control the special function for TV
channels.
Note: you must enter your personal code before
entering the Lock menu.
Display the main menu by pressing Menu and select
Lock, then press OK to confirm. Then press the
number button to enter the password to enter the Lock
menu. The factory default code is 1234. And the super
password is 0423. If you forget your code, enter it to
overrideanyexistingcodes.
The Lock options are as below:
Channel Lock: this option allows you to lock a certain
Menu Operation

10
Menu Operation
display Channel lockmenu.Use▲/▼toselecta
certain TV channel you want to lock, then press OK to
lock. To unlock, use the same operation.
Parental rating:this option allows you to set a rating
to a program. Highlight Parental rating, press OK/►to
display Parental ratingmenu.Thenuse◄/►toadjust.
Input lock:this option allows you to lock a certain
externalsourceyouwanttolock.PressOK/►todisplay
Input lockmenu,thenpress ▲/▼ toselectacertain
externalsourceyouwanttolock,andpressOK to lock.
To unlock, use the same operation.
Note: when the current input is locked, you can press
OK and enter the password to enter.
Front panel lock:press◄/►toselect On to lock
theset's buttons.
Installation lock:press◄/►toselectOn to prevent
access to the Installation menu to prevent any channels
from being set up without your consent.
Max volume:press◄/►to setthemaxvolumewhen
watching programme.
Change password:this option allows you to change the
password.PressOK/►toenter,thenpressthenumber
button to enter the new password twice.
Clean all:this option allows you to unlock all locked
channels.PressOKtoenter, use ◄/► toselectOK,
press OKtoconrm.
Setup Menu
The Setup menu allows you to configure the TV with
your preferences.
Display the main menu by pressing Menu and select
Setup, then press OK to display its options:
Language Selection: select Setup > Language.Press
OK/►todisplayitssubmenus:
Menu language:press◄/►toselectthepreferred
language for all menus.
Preferred audio language:press◄/►toselectthe
preferred audio language.
Preferred audio language 2nd:press◄/►toselect
the 2nd preferred audio language.
Channel install
Automatic Search: this option allows the TV to
searchfor,ndandstorealltheavailableanalogand
digitalchannels.Followallthestepsinturnspecied
hereafter.
1. select Setup > Channel install, then press OK/►
to display its options.
2. Select Automatic search, then press OK/►to
enter.
3. Select Digital & Analog (or Digital or Analog),
then press OK/►tostarttheautomaticsearch
process.The search may take a few minutes.
During the process, you can press Menu or Exit to
abort halfway.
4. Once the automatic search ends, press Menu to
return to the last step or press Exit to close the
menu.
5. After the automatic search, channels are
arranged in a preset order. You can skip channels,
modify the preset order or rename channels, select
Setup > Organiser and press OK/►toenter.
Skipping channels: if a channel was stored twice or
its reception is poor, you can simply skip it. The
skipped channels can not be selected by pressing the
PROGRAM DOWN/UP button.
Select Channel skip and press OK/►todisplay
Channel skipmenu.Press▲/▼toselectachannel
and press OKtocheckthebox.
Sorting channels: swaps two channels position.
1. Select Channel sort and press OK/►todisplay
Channel sort menu.
2.Press▲/▼toselectachannel,andpressOK to
 conrm.
 3.Press▲/▼toselectyourswappedchannel,and
press OK to swap the two channels.
Edit channels: select Channel edit and press
OK/►todisplayChannel editmenu.Press▲/▼
to select a channel you want to edit, then press OK
 toenter.Press▲/▼toselectChannel number
or Channel name, using the digit keys to edit the
 channelnumberorchannelname,nallypressOK to
 conrm.
 Whenyouhavenished,pressMenu to return, or
press Exit to close the menu.
Automatic update: this allows you to update all
available channels, without
alteringthesortingofexistingchannels.
1. Select Channel install > Automatic update.
2.PressOK/►tostarttoupdatethechannels.To
stop the update process, press Menu.
3. When the search is completed, press Menu to
return, or press OK to restart.
Analog manual scan
1. Select Channel install > Analog manual scan,
press OK/►toenter.
2.Press▲/▼/◄/►andnumberorOK to search,
 netuneorstorethechannel.
3.PressMenu to return to the previous menu or
press Exit to close the menu.
Air manual Installation: Allows you to start manual
searching the available channels from the current
frequency or any frequency you input. (Only for digital
channels)
1. Select Channel install > Air manual installation,
press OK/►toenter.
2.PressOK to start search from the current
frequency, or use digit keys to input a frequency,
then press OK to start search.
3. When the search is completed, press Menu to
return, or press OK to restart.