TCL MC14 User manual

MC21
MC15
MC14
OPERATION MANUAL
This apparatus is with multi functions, so to use it properly,
please read the instructions carefully before your operation.
72-MC2100-001
COLOR MONITOR
No.19 District, Zhongkai High-tech Develop-
ment Zone, Huizhou City, Guangdong Province
:
Product Implementation Standard :
Q/WP1034-2005
Q/WP1034-2005
QB/44130033952-2005
QB/44130033952-2005
No.
:
Product Standardization File No.:
TCL
4008-123456
If you encounter any problem with your monitor, please call TCL
customer service hotline [phone] for assistance.nationwide

02
03
03
03
04
05
05
05 AV
05
05
06
7
01

02

:
1.
2.
3.
4.
390x478x325(mm) 390x478x325(mm) 504x512x420(mm)
34cm
MC14 MC15 MC21
36cm 51cm
13kg 15kg 30kg
S
AV NTSC3.58 NTSC4.43 PAL
165V-250V 50Hz
50W 60W 70W
1.0Vp-p 0.7Vp-p
AV1 AV2 (BNC) 1.0Vp-p 0.5VRMS
NTSC
AV(BNC) S AV (BNC)
03
2
7 1.5V
1

12
1.
2.
04
OUTPUT
INPUT
1
VIDEO1
OUTPUT
INPUT
1
AUDIO1
OUTPUT
INPUT
2
VIDEO2
OUTPUT
INPUT
2
AUDIO2
REMOTE INPUT
OUTPUT
INPUT
1
VIDEO1
OUTPUT
INPUT
1
AUDIO1
OUTPUT
INPUT
2
VIDEO2
OUTPUT
INPUT
2
AUDIO2
REMOTE INPUT
MC21

AV
SVHS S
SVHS S
S1
1
05
12
SYSTEM
1616 16 VOLUME 16
50
1 1 VIDEO MODE INPUT 1
50
ENGLISH ENGLISHENGLISH LANGUAGELANGUAGE
50
50
5050
50
50
50 49
3
3
2
2
1
1
:
1 NTSC
2
3
4
5
6
I
O

06
1-99
12 1 2
12 S
S2
ÆÆÆ
3
2
1
ÆÆÆ
11
4
11
ÆÆÆ
3
2
1
ÆÆÆ ÆÆÆ

02 Warnings and Precautions
03 Features
03 Specifications
03 Remote Control
04 Connection Illustrations
05 Basic Operations
05 Turning on/off the Unit
05 AV Function
05 PictureAdjustments
05 System Settings
06 Browse Settings
Main Unit - one set
Remote Control Handset - one set, including two AAA batteries
Operation Manual - one pc (including warranty card, quality certificate, etc.)
Remote Control Cable - one pc
01
Packing List
Contents

02
Warnings and Precautions
Warnings
Precautions
Do not push objects of any kind
into the unit as this may cause
fire or short circuit and damage
the unit.
High voltage inside! To reduce
the risk of electric shock, do not
remove cover (or back). Refer
servicing to qualified personnel.
To prevent fire or shock hazard,
do not expose the unit to rain,
moisture or heavy dust areas.
Remove the power plug when the unit will not be used for a
long period of time, or when it is thunder or lightning.
Do not use chemicals such as
alcohol, ammonia or thinner for
cleaning. If necessary, use a piece
of wet cloth or sponge with some
diluted neutral detergent, wring dry
for cleaning. Be sure to cut off the
power before your cleaning.
Place the unit on a platform
strong enough for supporting.
Keep it stable to avoid falling
off and cause the damage.
Protect the unit, especially the
screen, from being attached by
hard objects. Please take care
during transportation and
loading/unloading.
During your operation, if there
is something abnormal found,
such as strange smell, or if
some objects fall into the unit,
switch off and unplug the unit
immediately and contact the
service personnel as soon as
possible.
High temperature inside may cause the damage to the
unit. Please keep it well ventilated and do not block the
ventilation slots and openings. Keep away from heat sources
such as stove and radiator and avoid direct sunshine.
Use suitable power outlet based
on power consumption of the unit.
Do not share a power outlet with
other electrical appliances.
To protect the power cord,
do not pull it or press it
with excessive force.
The unit shall not be exposed
to dripping or splashing and
no objects filled with liquids
such as vases, shall be placed
on the unit.
To avoid color abnormality,
keep the unit away from the
magnetic objects, such as
the speaker, electromotor
or transformer.

Battery Installation
Using the Remote Control
03
Features
Remote Control
Specifications
390x478x325(mm) 390x478x325(mm) 504x512x420(mm)
34cm
MC14 MC15 MC21
36cm 51cm
13kg 15kg 30kg
AV NTSC3.58, NTSC4.43, PAL
165V-250V 50Hz
50W 60W 70W
Y: 1.0Vp-p; C: 0.7Vp-p
Video: 1.0Vp-p; Audio: 0.5VRMS
Notes:
1. For better performance, once you find the operation is abnormal, please replace the batteries
and have a try again.
Do not mix old and new batteries or different types.2.
3. When the batteries are to be exhausted, battery leakage may occur and cause the damage to
the remote. When the operation is not sensitive enough, the battery may be low, so please
change batteries immediately.
4. If the device is not to be used for a long period of time, remove the batteries to prevent damage
or injury from possible battery leakage.
Remote Jack
MENU
LEFT button
RIGHT button
Note:
UP/DOWN buttons and LEFT/RIGHT buttons take effect
only in the MENU mode.
Transmitter
UP button
DOWN button
(When you use wire remote,
the operation works only on
the connected monitor.)

1.Sensor
2. LED indicator
12
04
OUTPUT
INPUT
1
VIDEO1
OUTPUT
INPUT
1
AUDIO1
OUTPUT
INPUT
2
VIDEO2
OUTPUT
INPUT
2
AUDIO2
REMOTE INPUT
OUTPUT
INPUT
1
VIDEO1
OUTPUT
INPUT
1
AUDIO1
OUTPUT
INPUT
2
VIDEO2
OUTPUT
INPUT
2
AUDIO2
REMOTE INPUT
Take MC 21 for an example:
Connection Illustrations
Shooting Camera
Shooting Camera
Camcorder
Remote Control

05
PICTURE
STATUS BRIGHTSTATUS BRIGHT
CONTRAST
BRIGHT
COLOR
SHARP
50
50
50
50
COLOR TEMP
NORMAL
Notes:
1 TINT is available only in NTSC mode.
2 CONTRAST adjusts the distinction between the black and white parts of the picture.
3 BRIGHT is used to brighten the darkest parts of the picture. Usually it is adjusted together
with CONTRAST setting.
4 COLOR is used to add or reduce color.
5 SHARP improves picture details.
6 COLOR TEMP (color temperature) includes 3 modes: NORMAL, COLD and WARM.
AV Function
There is an SVHS (S-VIDEO) input jack on the unit. If your apparatus
has an SVHS jack, you can connect it to the S-VIDEO input jack to
achieve the high quality pictures. Please do not use the S-VIDEO jack
and VIDEO1 jack simultaneously.
Note:
16
1
ENGLISHENGLISH
SYSTEM
VOLUME 16
VIDEO MODE INPUT 1
LANGUAGELANGUAGE
CONTRAST 49
3
3
2
2
1
1
Connect the power cord first.
Basic Operations
VIDEO1
Picture Adjustments
System Settings
VOLUME: Increase/Decrease thesound level by pressing UP/DOWN buttons.
VIDEO MODE: INPUT 1, INPUT 2
LANGUAGE: CHINESE, ENGLISH
Press twice
SYSTEM
VIDEO MODE VIDEO1
VOLUMEVOLUME 1616
LANGUAGE
PICTURE
CONTRST 50CONTRST 50
BRIGHT
COLOR
SHARP
STATUS BRIGHT
50
50
50
COLOR TEMP
NORMAL
Turning on/off the Unit

06
Browse Settings
3
2
1
4
3
2
1
Press three times
Press three times
BROWSE TIME: The time can be adjusted from 1 to 99 seconds.
VIDEO CHOICE: INPUT 1, INPUT 2 (If both INPUT 1 and INPUT 2 are set to ON, you can
cyclically browse these two inputchannels.
If S-VIDEO input jack isconnected, the system will automaticallyselect
S-VIDEO and INPUT2 as theinput channels to browse.)
BROWSE SWITCH: The browse function will take effect only whenON is set.
When you want to stop the function, press MENU to exit directly and then “ BROWSE SWITCH
OFF” appears on the screen. If you want to activate this function again, enter the BROWSE menu to
make menu controls.
browse
Note:
BROWSE TIMEBROWSE TIME
ÆÆÆ
OFF
BROWSE
VIDEO CHOICE
BROWSE SWITCH
VIDEO CHOICEVIDEO CHOICE
ÆÆÆ
OFF
BROWSE
BROWSE SWITCH
99
BROWSE TIME
INPUT 1INPUT 1
OFF
INPUT 2
OFFOFF
VIDEO CHOICE
INPUT 1INPUT 1
OFF
INPUT 2
ONON
VIDEO CHOICE
BROWSE TIMEBROWSE TIME
ÆÆÆ
OFF
BROWSE
VIDEO CHOICE
BROWSE SWITCH BROWSE SWITCHBROWSE SWITCH
ÆÆÆ
BROWSE
99
BROWSE TIME
VIDEO CHOICE
OFFOFF BROWSE SWITCHBROWSE SWITCH
ÆÆÆ
BROWSE
99
BROWSE TIME
VIDEO CHOICE
ONON