TCL ZOOM User manual

User Guide
www.tclusa.com

1
TABLE OF CONTENTS:
Introduction
Battery setup
Programming your TCL Zoom remote
Installing the TCL Zoom app
Installing your Zoom receiver
TCL Zoom remote button functions
Using your TCL Zoom remote
Use TCL Zoom remote on Zoom app
Use TCL Zoom remote outside Zoom app
Troubleshooting
Warranty
FCC Statement
Join our Zoom Facebook page
to learn more about your device
and get the latest news.
need Facebook link

2
Introduction
Congratulations on your purchase of the TCL Zoom, the interactive remote control created
specifically for kids.
Features:
- Compatible with TCL Roku TV models 43S525 and 50S525.
- Interactive remote for navigating the Zoom streaming app.
- When paired with the Zoom app, kids will be able to navigate through thousands of movies
and TV episodes.
- It functions as a regular TV remote control, i.e., turning the TV on/o, volume control, and
option select; and can also be used with other TV applications.
- Voice search can be used to find movies and TV episodes on the Zoom app.
Inclusions:
TCL Zoom remote Zoom receiver Two (2) AAA batteries

3
Battery setup
Your TCL Zoom remote requires two (2) AAA batteries
(included).
Battery Installation:
1. On the back of the remote, the battery compartment is
located at the bottom of the remote. Place your finger
on the corrugated surface of the battery cover and slide
it downwards to remove it.
2. Insert the two (2) AAA batteries inside by matching the
(+) and (-) symbols of the batteries to the (+) and (-)
symbols inside the battery compartment.
3. To cover the battery compartment, place the battery
cover below the opening and slide it upwards to lock-in
place.

NOTE: If your TCL Zoom remote stops working properly, replace batteries immediately.
Battery Precautions:
- Do not mix old and new batteries.
- Do not mix rechargeable and disposable batteries.
- Always remove old or worn-out batteries and replace them with new ones.
- Recycle or dispose batteries in accordance with local and national regulations.
4

Programming your TCL Zoom remote
Installing the TCL Zoom app
1. Check if the Zoom app is already installed
on your TCL Roku TV.
2. If the Zoom app is not yet installed, go to
Streaming Channels menu.
3. Enter Zoom on the search box and then
select Zoom.
4. Select Add Channel to install the Zoom app.
5

6
Installing your Zoom receiver
1. Turn on your TV using the TV remote control.
2. Plug your Zoom receiver’s dongle into the TV’s USB
port which is usually located on the side of the TV.
Once connected properly, a blue light will flash once
from your Zoom receiver.
3. Place your Zoom receiver on the top of the TV, then
clip the ring at the back of the TV. Make sure that the
angle of the Zoom receiver is within the range of your
Zoom remote.
NOTE: Make sure that the front of the Zoom receiver is
facing forward.
TV
TVTV

7
TCL Zoom remote button functions
Your TCL Zoom remote also functions as a TV remote control.
Power - turns the remote on/o
Hotkey - shortcut to Zoom app
Trackpad - zooming in/out
Voice - voice search
Left/Right - menu navigation
A
B
D
C
E
Volume Up/Down
F
Trigger - select items/play movie/OK button
G
A
G
F
B
C
D
E

Using your TCL Zoom remote
NOTE: For more instructions, access the Help page in Zoom app.
Use TCL Zoom remote on Zoom app
1. Point your TCL Zoom remote at the TV and within range of the Zoom receiver. A blue
circle will appear on your TV screen as a pointer.
2. Select a topic island then slide your thumb up on the trackpad to zoom in and see the
movies on that island.
3. You can further zoom in the screen by sliding your thumb again.
4. If you want to go back, just zoom out by sliding your thumb downwards on the trackpad.
5. To move the screen around, hold the trigger and slowly move your arm around.
6. To select a movie, point the blue circle then press the trigger.
Use TCL Zoom remote outside Zoom app
1. Use the trackpad to go up/down the menu; ◄/►keys to go left/right.
2. Use the trigger to select.
8

9
Troubleshooting
Remote does not operate on your TV
- Make sure that the Zoom receiver is plugged properly on your TV, wait for the blue light to
flash once from your Zoom receiver, indicating it's been plugged in properly.
- Check if your batteries are new and installed correctly.
- Make sure that your TCL Zoom remote is within range of the Zoom receiver and there is no
obstruction between the Zoom receiver and the remote.
- Make sure you have installed the Zoom app on your TV.
- Check the angle of your Zoom receiver and adjust it properly.
- TCL Zoom remote may not be compatible with your TV.
Version of TV supported
TCL Roku TV 43S525 and 50S525

Pairing of the Zoom remote and the receiver
The Zoom remote and the receiver are pre-paired. Users don’t have to pair it by themselves in
general. But if the light blinks red, it indicates the Zoom remote and the receiver needs to be
paired again.
1. Keep the receiver plugged to the TV.
2. Move the Zoom remote close to the receiver.
3. Long press the Zoom hotkey and the volume down button for a few seconds.
4. The red light will flash blue two times to indicate that both devices are paired.
10

Warranty
TCL North America warrants this product to be free from manufacturing defects for a period
of 90 days from the original date of consumer purchase. This warranty is limited to the repair
or replacement of this product only and does not extend to consequential or incidental damage
to other products that may be used with this unit. This warranty is in lieu of all other warranties
express or implied. Some states do not allow limitations on how long an implied warranty lasts
or permit the exclusion or limitation of incidental or consequential damages, so the above
limitations may not apply to you. This warranty gives you specific rights, and you may also have
other rights which vary from state to state. If the unit should prove defective within the warranty
period, return prepaid with dated proof of purchase to:
TTE Technology, Inc. (dba TCL North America)
1860 Compton Ave, Corona, CA 92881, USA
11

FCC Statement
This device complies with part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause undesired operation.
FCC NOTE: The manufacturer is not responsible for any radio or TV interference caused by
unauthorized modifications to this equipment. Such modifications could void the user’s
authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference in a residential installation. This equipment generates,
uses and can radiate radio frequency energy and, if not installed and used in accordance with
the instructions may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment does
cause harmful interference to radio or television reception, which can be determined by turning
12

the equipment o and on, the user is encouraged to try to correct the interference by one or
more of the following measures:
●Reorient or relocate the receiving antenna.
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit dierent from that to which the receiver
is connected.
●Consult the dealer or an experienced radio/TV technician for help.
13

TTE Technology, Inc. (dba TCL North America)
1860 Compton Ave, Corona, CA 92881, USA