
TotalCableSolutions.com Total Cable Solutions 888.235.2097
3 (of 4)
SAVE TIME & MONEY! BUY
FULLY LOADED
FROM TCS
TODAY!
4. Fix the cable output onto the solid module and screw up, and output the cable through the black exible rubber jam, and close up
the box cover and screw down.
5. Calculate the wall size for installation, and set the box on the wall surface.
3. Install the adapters, insert the pigtails into the adapters and x them with small screws and board.
Cable Output Location
Screws for xing splice tray
Solid Module Flexible Rubber Jam