Team C T4 User manual

1:10 SCALE 4WD ELECTRIC PRO RACING BUGGY
All manuals and user guides at all-guides.com
all-guides.com

Notice
This manual is written in english language only. If you need a manual in your language please visit our
website or contact your distributor!
Diese Anleitung wurde in englischer Sprache verfasst. Sollten sie eine Anleitung in ihrer Sprache
benötigen, besuchen sie unsere website oder konaktieren sie ihren Vertriebsagenten.
Questo manuale è stato scritto in inglese. Se avete bisogno del manuale nella tua lingua, si prega di
visitare il nostro sito web o contattate il proprio distributore.
Este manual está escrito en Inglés. Si necesita el manual en su idioma, por favor visite nuestro sitio
web o contacte con su distribuidor.
Ce manuel est écrit en langue anglaise. Si vous avez besoin d'un manuel dans votre langue
s'il vous plaît visitez notre site web ou contactez votre distributeur!
Deze handleiding is geschreven in het Engels taal beschikbaar. Als u een handleiding in uw eigen
taal kunt u terecht op onze website of neem contact op met uw distributeur!
Thank you for purchasing this T4 Competition Buggy by Team C. This manual shows instructions and
tips to built and maintain your T4. Please take some time to read through to get familiar with the shown
steps.
We continually improve our products, due to that, actual parts my be different to the illustrations.
Please check our website for the latest versions manuals and tips before you start to built this model.
Generall Information
THIS IS NOT A TOY!
Not suitable for children under 14 years of age without adult supervision.
This is a high performance vehicle, for safety reason don’t run on public streets, in crowded areas,
environmentally areas or near children or animals.
This model contains rotationg parts and parts which become hot during operation. Care must been
taken to avoid damage or injuries.
This product may require some assembly and routine maintance.
This product is covered by warranty based on material defectives. Crash damage or maintenance
failures are not covered under warranty.
Batteries should be used in good condition only, and need to be fully charged.
Nitro models should be driven outside of buildings only. Inhaling exhaust gases could cause health
damage.
Keep chemicals stored out of the range of small children.
Make sure your model and equipment is in perfect condition before you use it, to ensure savety
and fun while driving.
All manuals and user guides at all-guides.com

DIGITAL
PROPORTIONAL
RADIO CONTROL
SYSTEM
DIGITAL
PROPORTIONAL
RADIO CONTROL
SYSTEM
反向开关
Transmitter Preparation
27MHzTransmitter Crystal （TX）
Transmitter crystal(TX)
Power Switch
ON
OFF
Antenna
Extend the antenna to the maximum
Length for best performance
The crystal can be replaced to change frequencies.
Note : You must also change receiver crystals!
Do not use AM crystals
Receiver crystal(RX)
Steering Trim
To be used for trimming the steering
operation
Throttle Trim
Steering Dual Rate
To be used to adjust steering servo throw
AA Alkaling Batteries
8X
Open battery cover at the bottom of transmitter.
Install batteries. Follow the direction of batteries
designated in the inside of battery box.
Transmitter Battery Installation
This switch is used for optional parts.
3ch Switch
Reverse Switch
Low Batteries(Light Blinks)
Good Batteries
Battery Level Indicator
Left turn Straight (neutral)
Right turn
Brake
Forward Stop(Neutral)
To be used for throttle operation
Throttle Trigger
Battery Cover
Servo Factory Settings
1
1
2
3
2
To be used for trimming the throttle
operation
3
4
4
All manuals and user guides at all-guides.com

Transmitter Preparation
Battery
A new Ni-MH battery must be charged before it is used.Refer to the charger instruction manual for charging.
Set up the radio control system as indicated below.
6
5
8
Servo
Receiver
Transmitter
10
4
Switch
7
9
Electronic Speed
Controller
Motor
DIGITAL
PROPORTIONAL
RADIO CONTROL
SYSTEM
11
2
ON
OFF
6
10
ON
OFF
5
8
1
3
Tools required
Needie Nose Pllers Awl Grease Screw Cement
Instant Glue
Hex Wrench
Differential Grease
Molybdenum Grease(Black)
Hex Wrench
Body Reamer
No need to pre-drill precise holes
(1mm to 15mm)can be drilled
Wire Cutters
Sharp Hobby knife
ROUND CUTTER
For trimming bodies!
Start
Finish
Install batteries.(Transmitter)
Extend the antenna.(Transmitter)
Connect the battery
Extend the antenna.(Reveiver)
Center the trims.
Switch on.(Transmitter)
Switch on.(Reveiver)
Make sure the servos are in command.
Switch off.(Reveiver)
Switch off.(Transmitter)
Retract the antenna(Transmitter)
1
8
7
2
5
3
4
6
9
10
11
H154
H162
H096
All manuals and user guides at all-guides.com

Diff-gear Box / Motor Mount
……………14
TR4058 M3x8 Screw
……………15
TR4058 M3x8 Screw
1
Screw
Cement
Apply threadlock
TR4058 M3x8
TR4058 M3x8
TR4058 M3x8
TU0415
Motor Mount
TR4016
Center Gear-box-lower
TR4002
Front Gear-box-lower
T04039
Rear Gear-box-lower
Cut the waste material.
Suspension Mount/Side plate
T04051
Side plate-Right
T04051
Side plate-Left
T04050
Chassis
TU0416
Front Arm Mount-Rear
TU0418
Rear Arm Mount-Front
T04052
Battery Mount
TR4058 M3x8
2
1
Screw
Cement
All manuals and user guides at all-guides.com

…………………………24
T02048 2.37mm Ball
T02098 5x8x2.5 Ball Bearing
………………4
TR4039 13.1x19x0.8 Washer
………4
………………2
T04037 2.6x26 Differential screw
………………2
T02050 2.6x6x3 Stop push
………………4
TR4057 10x12x0.2 Washer
…………4
T02099 10x15x4 Ball Bearing
T02100 5x10x4 Ball Bearing
……………4
86000 5.1x8x0.2 Washer
…………………2
TR4059 M3x5 Screw
………………2
……………2
T04032 2x9.8 Pin
T02100
T02098
T02098
T02048
T02099
T02099
T02050
2
Assemble as many times as specified Apply grease
T04033
Diff connecting
Cup-Long
ball bearing
TR4057
TR4057
T04037
T04037
Diff Nut
T02047
Differential Spring
T04033
Diff connecting
Cup-Short
TR4039
TR4039
TR4028
Diff Gear-39T
T04032
86000
T04037
T04037 4x1 O-Ring
………………2
Lock the difference screw, then relax 1/4 of the circles.
F/R Differential
Mid-F / Mid-R CVD
TR4059 M3x5 T02100
T04032
86000
TR4028
Diff Gear-16T
TR4059 M3x5
86000
TR4028
Diff Gear-16T
T04056
Mid CVD-Front(Long)
T04056
Mid CVD-Rear(Short)
中CVD-后(短)
Front
前
Rear
后
Apply threadlock
x2
3x2
4
Screw
Cement
Screw
Cement
Screw
Cement
All manuals and user guides at all-guides.com
all-guides.com

TR4059 M3x8 Screw
………4
TR4059 M3x10 Screw
………8
…………2
T02099 10x15x4 Ball Bearing
……………4
T04032 2x9.8 Pin
TR4059 M3x5 Screw
………………2
T04018 Slipper nut
……………1
T02099
T02099
3
TR4059 M3x8
TR4059 M3x10
TR4059 M3x10
TR4059 M3x8
TR4002
Front Gear-box-cover
T04039
Rear Gear-box-cover
TR4027
Supr Gear-85T
T04036
Slipper pad
T04036
Slipper pad
T04018
T04032
T04032
T04032
T04032
TR4059 M3x5
TR4022
Spring Buckle
T04019
Slipper Spring
T04020
Slipper Hub-F
T04020
Slipper Hub-R
T04023
Center Shaft
中轴
T04021
Mid Connecting Hub-R
TR4059 M3x5
T04021
Mid Connecting Hub-F
Aften first run, re-adjust to around 3.5mm Tighten for less slippage when traction grip
Loosen for more slippage
F/R Gear-Box
Mid Gear
Apply threadlock
5
6
Screw
Cement
Screw
Cement
Screw
Cement
3.5mm
All manuals and user guides at all-guides.com

………………4
T02081 3x7x0.8 Washer
……………1
TR4059 M2.6x8 Screw
T02093 Ball stud-Short
……………1
TR4059 M3x10 Screw
……………4
Futaba - 25t Hitec - 24t Sanwa / JR / KO - 23t
Select the servo horn matching the servo being used.
T02081
4
Apply grease Must be purchased separately
TR4059 M2.6x8
TR4059 M3x10
T02093
T04006
Steering Servo
T04005
Servo Mount
Center Gear
Steering Servo
X
X
7
8
All manuals and user guides at all-guides.com

………………2
TR4058 M3x8 Screw
T02092 Ball stud-Long
…………3
T04038 M3 Screw
…………2
5
Approx.5mm
TR4058 M3x8
T04038 M3
T02092
T02092
T02092
T04038 M3
T04003
Servo Saver-Top
T04003
Servo Saver-Bottom
T04004
Steering Rack
TR4049
Servo Saver Body
TR4049
Servo Saver Spring
TR4049
Servo Saver Nut
T04003
Servo Saver-left
Steering Servo
Buffer
9
10
All manuals and user guides at all-guides.com

Upper Deck-Front / Front Upper Suspension Arm Mount
17.5mm
T04024 3x40 Turnbuckle
…………1
T04014 4.8mm Ball End-Long
……2
…………………4
T04031 4x7x2.5 Ball bearing
………………2
TR4058 M3x8 Screw
T02092 Ball stud-Long
………2
TR4059 M3x8 Screw
………3
TR4059 M3x10 Screw
………3
▲Projection.Note direction
6
Ture-to -scale diagram
TR4058 M3x8
T04014
T04014
T04024
T04031
TR4049
TR4059 M3x6 Screw
………1
TR4059 M3x6
TR4059 M3x8
T02092
TR4059 M3x10 T04053
Upper Deck-F
TR4004
Upper Suspension Arm Mount-F
TR4023
Front Body Mount
TR4059 M3x8
T04055
Antenna pipe mount
Buffer
Apply threadlock
…………………2
T04057 4.1x6x2.1 Washer
12
1:1
1:1
11
Screw
Cement
Screw
Cement
Screw
Cement
4mm
T04057
4.1x6x2.1 Washer
All manuals and user guides at all-guides.com

Upper Deck-Rear / Rear Upper Suspension Arm Mount
TR4059 M3x8 Screw
……………2
T02092 Ball stud-Long
…………2
TR4059 M3x12 Screw
…………2
7
TR4059 M3x10 Screw
…………3
TR4059 M3x8
TU0428
Carbon Front Shock Tower
TR4004
Upper Suspension Arm Mount-R
T04053
Upper Deck-R
T02092
TR4059 M3x10
TR4059 M3x12 Screw
…………2
TR4059 M3x12
Front Shock Tower
14
13
All manuals and user guides at all-guides.com
all-guides.com

TR4059 M3x10 Screw
…………4
TR4059 M3x8 Screw
…………2
8
TU0429
Carbon Rear Shock Tower
TR4059 M3x10
T04012
Wing Brack
TR4059 M3x8
TR4059 M3x12 Screw
…………2
TR4059 M3x12
Rear Shock Tower
Rear Shock Tower
15
16
All manuals and user guides at all-guides.com

TR4059 M3x12 Screw
…………4
T02093 Ball stud-Short
……………2
T02092 Ball stud-Long
…………2
T04038 M3 Screw
…………4
T02100 5x10x4 Ball Bearing
……………4
……………2
T04028 Front bearing collar
TR4011 1.6x11 Spring Pin
……………2
L R
9
Assemble both Left and Right
TR4059 M3x12
TR4016
Center Gear-box-cover
TR4011 1.6x11
T02100
T04028
T04038 M3
T02092
T02093
TR4007
Front Hub Carriers
TR4008
10 Degree-Left
Front Hub Carriers
13 Degree-Left
TR4007
Front Hub Carriers
TR4008
10 Degree-Right
Front Hub Carriers
13 Degree-Right
T04025
Front CVD TR4006
Steering Block
T04011
Hex Mount
Front Hub Carrier
Spur Gear Cover
LR
LR
18
17
T04057
3.1x5.5x1.0 Washer
All manuals and user guides at all-guides.com

TR4059 M2.5x4 Screw
…………………2
TR4046 2.5x30 Arm Pin
………………2
< L >
< R >
T04034 3x48.5 Arm Pin
………………2
………………2
TR4058 M3x8 Screw
TR4059 M3x10 Screw
……………2
……………2
T04002 Brace bushing
10
Assemble both Left and Right
T04007
Front Lower Arm
TR4059 M2.5x4
TR4046
T04002
T04034
TR4058 M3x8
TR4059 M3x10
T04009
Front Bumper
TU0416
Front Arm Mount-F
Front Hub Carrier
Front Suspension Arm
19
20
LR
LR
LR
All manuals and user guides at all-guides.com

18.5mm
23.5mm
T04024 3x45 Turnbuckle
…………2
T04014 4.8mm Ball End-Long
……12
T04024 3x40 Turnbuckle
…………4
17.5mm
Rear upper Rod
T04024 3x40
T04024 3x45
Steering Rod
Front upper Rod-R 前上拉杆-右
23.5mm
3x45 Turnbuckle
Front upper Rod-L
T02092 Ball stud-Long
…………2
T02100 5x10x4 Ball Bearing
……………4
TR4011 1.6x11 Spring Pin
……………2
……………2
T04028 Rear bearing collar
Rear Hub Carrier
< R >
▲Projection.Note direction
3x45 Turnbuckle ▲Projection.Note direction
3x40 Turnbuckle ▲Projection.Note direction
3x40 Turnbuckle ▲Projection.Note direction
11
Ture-to -scale diagram Assemble as many times as specified Assemble both Left and Right
T04014
T02100
TR4011
Rear Hub Carriers-L
T02092
T04028
T04027
Rear CVD
后CVD
T04011 1.6x11
T04011
Hex Mount
Turnbuckle
Front Turnbuckle
1:1 x1
x1
x2
x2
23 LR
1:1 x2 LR
21
22
1:1
1:1
1:1
LR
4mm
All manuals and user guides at all-guides.com

TR4059 M2.5x4 Screw
…………………2
TR4046 2.5x30 Arm Pin
………………2
TR4011 2.5x6x1 Washer
…………………4
< L >
< R >
T04035 3x51 Arm Pin
………………2
……………2
TR4058 M3x10 Screw
12
Assemble both Left and Right
TR4046
TR4059 M2.5x4
T04008
Rear Lower Arm-L
TR4011 2.5x6x1
TR4058 M3x10
T04035
TU0418
Rear Arm Mount-Rear
TU0418
Rear Arm Mount-Ball
………………………4
TU0418 Rear Arm Mount-Ball
Rear Hub Carrier
Rear Suspension Arm
LR
24 LR
25 LR
All manuals and user guides at all-guides.com
all-guides.com

13
Assemble as many times as specified
TU0250-8 9x1 O-ring
………………4
……………………4
TU0250-8 1mm Washer-Black
…………………4
TU0250-8 2.8x1.9 O-ring
TU0250-8 Spring
TU0250-8 2.5mm Washer-White
TU0250-8 1mm Washer-White
…………………4
…………………4
…………………8
TU0250-8
Spring
TU0250-8
1mm Washer-Black
TU0250-8
2.8x1.9 O-ring
TU0250-8
2.5mm Washer-White
TU0250-8
2.8x1.9 O-ring
TU0250-8
1mm Washer-White
TU0250-8
9x1 O-ring
TU0250-3
Shock Below Cover
TU0250-3
Front Shock Absorber Body-Short
TU0250-4
Rear Shock Absorber Body-Long
Rear Turnbuckle
Assemble both Left and Right Assemble both front and rear
Shock Absorber
x2
x2
FR
26 LR
LRFR
27
All manuals and user guides at all-guides.com

14
Assemble as many times as specified Assemble both front and rear
TU0250-1/TU0250-2 2.3 E-ring
…………………8
TU0250-7 Rear Shock
Piston-White
……………4
TU0250-8 12x1 O-ring
……………4
TU0250-8 14x1.5 O-ring
……4
……………………4
T02062 5.8 Ball Stud
Shock Absorber
Oil
Shock Absorber
Oil
Front For Short
Rear For Long
Front For Short
Rear For Long
Front For Short
Rear For Long
Front For Short
Rear For Long
T02031 5.8 Ball End
TU0250-7 Front Shock
Piston-Black
……………4
……………4
TU0250-7
Front Piston-Black
Rear Piston-White
TU0250-1/TU0250-2
2.3 E-ring
TU0250-1/TU0250-2
2.3 E-ring
TU0250-1
Front Shock Absorber Shaft
TU0250-2
Rear Shock Absorber Shaft
TU0250-8
12x1 O-ring
T02062
5.8 Ball stud
T02062
5.8 Ball End
TU0250-3/TU0250-4
Shock Upper Cover
TU0250-8
14x1.5 O-ring
TU0250-10F
Front Shock Absorber Spring-Medium
TU0250-10R
Rear Shock Absorber Spring-Medium
TU0250-5
Below Spring Mount End
Shock Absorber
Shock Absorber
x2 FR
x2
FR
x2
FR
28
29
TU0250-3/TU0250-4
Spring Adjuster
All manuals and user guides at all-guides.com

Front Shock Absorber
TR4059 M3x22 Screw
……2
T02084 M3 Nylon Nut TR4059 M3x12 Screw
……2
…………2
TU0250-6 Shock cap ball
………………2
15
TR4059 M3x22
TR4059 M3x12
T02084 M3
TU0250-6
TU0250-6
T02084 M3
TR4059 M3x12
TU0250-6 3.1x5.5x2.0 Aluminium Washer
………………………………2
TU0250-6 Shock cap ball
…………………2
TR4059 M3x22 Screw
…2
T02084 M3 Nylon Nut
TR4059 M3x12 Screw
…………2
…………………2
TU0250-6 3.1x5.5x2.0
…………………2
Aluminium Washer
Rear Shock Absorber TR4059 M3x22
LR
30
30
LR
Assemble both Left and Right
LR
All manuals and user guides at all-guides.com

……………4
TR4058 M3x10 Screw
TR4059 M3x8 Screw
……………2
H481 M3x3 Screw
……………………1
Must be purchased separately
16
TR4058 M3x10
T04054
Battery Column
Motor
TU0415
Motor Cam
TR4059 M3x8
H481
21T Pinion Gear
H475 M3x3
Battery Column
Motor
X
X
32
33
All manuals and user guides at all-guides.com