
Instructions:
- Open the battery compartment and place 2 x AAA batteries in the correct
polarity as marked.
- Touch the POWER button to turn on the unit. It will display “8888”, then
show “0” g/lb/oz.
- The scales are now ready to use.
- Use the UNIT CHANGE button to change between g/lb/oz.
- The unit will turn off automatically after 3 minutes of inactivity.
How to use TARE function:
-To calculate the net weight, touch the TARE button to set back to 0g/lb/oz
between each mass added to the scales.
How to use the Timer:
-Under the normal scales mode, touch the TIMER (S/S) button to change to
timer mode. On the first time it will be defaulted to 1:00 countdown timer.
-To set the countdown time, use the MINUTE buttons to add minutes, and
the SECOND button to add seconds. The maximum countdown/count up
time is 99 minutes 59 seconds (99:59).
-When the countdown time has expired (when it reaches 0:00), the alarm
will sound. Press any button to stop the alarm.
-To change to a count up timer, press the MINUTE and SECOND buttons at
the same time, and the screen will show 0:00. Start and stop the count up
timer using the TIMER (S/S) button.
NOTE:
- When the LCD display becomes dimmer, please replace the batteries.
- Only use AAA batteries in these scales.
- Ensure not to mix old and new batteries.
- Please dispose of used batteries in a responsible manner.
- Never attempt to open, modify or repair the scales in any way.
- Do not drop heavy things onto the scales, or drop items from a height onto
the scales as it may damage the unit.