Techlogix HomPro HP-ACVT-DA2 User manual

HP-ACVT-DA2 USER MANUAL
Digital to Analog Audio Converter
This Digital to Analog Audio Converter is designed for either home or professional audio switching. It
converts Coaxial or To sl ink d ig ita l a ud io si gn al s t o a na lo g L /R a ud io an d a vai la ble fo r c on ne ct io n to a n
external device such as an amplifier via standard RCA-style jacks. This Converter is small in size and quite
easy to install.
1.0 Features
This Converter has many features that enable it to perform in a superior manner. Among those features you
will find:
1. Converts Coaxial or Toslink digital audio signals to analog L/R audio
2. Supports sampling rate at 32, 44.1, 48 and 96 KHz.
3. 24-bit SPDIF incoming bit stream on left and right channels
4. Provides electromagnetic-noise-free transmission.
5. Easy to install and simple to operate.
2.0 SPECIFICATIONS
Signal Inputs/Output
Input Audio
Coaxial or Toslink digital audio
Output Audio
L/R audio and 3.5mm
Connector
Input audio connector
To s l i n k 、1XRCA(Coaxial)
Output audio connector
2XRCA（R/L）+ Headphone
Sampling rate
32, 44.1, 48 and 96 KHz
Size(L-W-H)
55X60X22MM
Weight (Net)
78g
Power Requirement
External Power Supply
5V DC@<1A>
Power Consumption
0.5 watts (max)
3.0 PACKAGE CONTENTS
Before attempting to use this unit, please check the packaging and make sure the following items are
contained in the shipping carton:
1). Main unit (Digital to Analog Audio Converter).
2). DC 5V Power Supply
3) User’s Manual.

4.0 PANEL DESCRIPTIONS
Please study the panel drawings below and become familiar with the signal input(s), output(s) and power
requirements.
5.0 CONNECTION AND OPERATION
Before installation, please make sure all devices you wish to connect have been turned off.
1) Connect the audio source device to the Converter using appropriate To s l i n k or Coaxial cables.
2) Connect the A/V Receivers or Amplifiers to the Converter using appropriate L/R cable.
3) Insert the DC side of 5v power supply into the converter and then connect the AC side of the power
supply into the wall outlet.
Note: When connected to the To s l i n k and Coaxial cables at the same, the product will give priority to To s l i n k
input