Technaxx TX-118 User manual
Technaxx®* User Manual
Video Babyphone TX-118
The manufacturer Technaxx Deutschland GmbH & Co.KG hereby declares
that this device, to which this user manual belongs, complies with the
essential requirements of the standards referred to the Directive RED
2014/53/EU. The Declaration of Conformity you find here: www.technaxx.de/
(in bar at the bottom “Konformitätserklärung”). Before using the device the
first time, read the user manual carefully.
Service phone No. for technical support: 01805 012643 (14 cent/minute from
German fixed-line and 42 cent/minute from mobile networks).
Free Email: support@technaxx.de
If you drill a hole in the wall, please make sure that power cables, electrical
cords and/or pipelines are not damaged. When using the supplied mounting
material, we do not take the liability for a professional installation. You are
entirely responsible to ensure that the mounting material is suitable for the
particular masonry, and that the installation is done properly. When working at
higher altitudes, there is danger of falling! Therefore, use suitable safeguards.
Keep this user manual for future reference or product sharing carefully. Do
the same with the original accessories for this product. In case of warranty,
please contact the dealer or the store where you bought this product.
Warranty 2 years
Enjoy your product * Share your experience and opinion on one of the
well-known internet portals.
Features
Babyphone with video live view & VOX function to monitor the activities of
your child 2.4G wireless technology with up to 200m transmission distance
(open areas) Built-in microphone and speaker in both units for two-way
audio communication Camera can be turned 360° left/right & 45° front/back
In- visible infrared lights embedded for 2m night vision range Screen
power off automatically & VOX function (= voice activation) for power saving
Time alert to remind feeding times Encrypted digital wireless signal for
privacy protection Indicators for noise level in baby room Sound alert for
out-of-range warning
Product Overview (V1.0)
Camera front
Camera rear
1 Light sensor 6 Indicator LED
2 Lens 7 Speaker
3 Infrared LED 8 Pair Key
4 Microphone 9 Power Adapter Socket
5 Power Key / Volume adjustment
Monitor front
Monitor rear
1 Indicator for external power
adapter 9 Key for Zoom / Answer / Paring
/ Exit key
2 Up / Increase volume 10 Down / Decrease volume
3 OK / Menu button 11 Microphone
4 Left / Channel selection button 12 Power button
5 Power on indicator 13 Speaker
6 Noise level indicator 14 Power adapter socket
7 2.31” LCD display 15 Bracket
8 Right / Alarm setting 16 Battery Compartment (for 4x
AAA batteries, not included)
Operation and use
Turn on / Turn off
Camera: Press power to turn on the device.
Press and hold at least 3 seconds to shutdown the device.
Monitor: Press power to turn on the device.
Press and hold at least 3 seconds to shutdown the device.
Pairing
It is required to pair the units before using.
Press and hold power button and talkback button of monitor
simultaneously in shutdown mode until enter into the pairing interface, select
the desired channel with the direction key.
1.
Press Up / Down button to select
a channel
Press Left / Right button to set
Press OK button to entry
2.
Pairing…
Press OK button to start pairing after finishing channel selection.
Turn on the camera. Then short press the Pair key on the rear side of
the camera for pairing within 60 seconds. The monitor will show a message
once pairing successfully.
Follow the message to exit the pairing interface to see the live
image on the monitor. Note: It will return to live image if the pairing operation
is failed or not complete within 60 seconds.
Answering (on the monitor)
Press and hold the talkback button of monitor and talk. You can hear the
sound at the camera side. The user will not hear the sound from the camera
side during talkback operation until the button is released.
Note: After pressing and holding the talkback button wait until the microphone
on the top of the monitor is shown before you start speaking.
Voice Sensor
The voice sensor has three levels (low, medium, high). The monitor will enter
into power-saving mode when the sound detected by camera under the
threshold, and the device will be activated automatically and return to
monitoring state once the sound reach to threshold.
General Settings
Press menu under real-time monitoring and enter the main interface of
menu.
1 Alert Ringtone
2 Screen Display
3 Voice Sensor
4 Language
5 Exit
User can set for Alert Ringtone, Screen Display, Voice Sensor,
Language and Exit after entering the main interface of menu:
# Press left button or right button to select items
# Press up button or down button to select parameters
# Press OK button to confirm
# Press talkback button to return.
Activate the screen
Note: See function table next page for the different combination of settings
and there results on the work mode.
Screen backlight mode
Click the OK/Menu button under real-time monitoring status (menu main
interface).
Select Screen Display.
Select LCD Backlight Time (there are 5 different levels): Keep On, 10
Seconds, 30 Seconds, 1 Minute, 3 Minutes.
Select “Keep On” the monitor does not switch off. If one of the time
levels is selected, the monitor will switch off after the selected time. A voice at
camera side cannot activate the monitor’s backlight. Only by pressing any
button on the monitor, it can be activated again.
Sleep mode
Click the OK/Menu button under real-time monitoring status (menu main
interface).
Select Voice Sensor (there are 4 different levels): low, medium, high, off.
Select “off” the monitor does not switch on. If others selected, the
monitor is activated through voice at the camera side. The monitor can also
be activated by clicking any button on the monitor.
Function table
Voice sensor
setting
Backlight
setting Babyphone works
Voice sensor
off Backlight
keep on
You can hear the sound but have to activate
the monitor manually by any button. The
monitor is active until you press the power
button (12) to turn it off.
Voice sensor
off
Backlight set
to 10 / 30 sec,
1 / 3 min.
You can hear the sound but have to activate
the monitor manually by any button. The
monitor is active for the set backlight time.
Voice sensor
low, middle or
high
Backlight
keep on
The sound activates the monitor. As long as
the voice sensor detects a sound the
monitor is active. If sound does not exceed
the sensitivity setting limit, the monitor is
active for another 10 seconds before turning
off.
Voice sensor
low, middle or
high
Backlight set
to 10 / 30 sec,
1 / 3 min.
The sound activates the monitor. As long as
the voice sensor detects sound the monitor
will stay on. After the last time the sound
was over the threshold the monitor will keep
on for additional 10 seconds. The monitor is
active for the maximum set backlight time
only.
Tips
When the monitor is disconnected with camera, there will be a Beep sound
to give an alarm and "No Connect" warning is displayed.
If the baby is crying louder, the noise level indicator LED will increase
accordingly.
If batteries power is low, the monitor will display "Low Battery" warning
change batteries or connect to an external power source.
Important: First remove the batteries before using external power source!
Volume Adjustment
The camera has 5 levels of volume adjustment.
The default volume of the camera is set at Level 3.
The user can make adjustment by 1x pressing the power switch.
The volume level goes from level 1 to level 5.
Technical specifications
Camera
Image sensor CMOS 0,3MP
Camera resolution 640 x 480
Viewing angle (horizontal ) Max. 40°
Night vision range ≤2m
Working voltage DC 5V
Working current Max. 300mA
Working temperature 0°C~+40°C
Working humidity 15%~85%RH
Weight / Dimension 63g / (L) 5.7 x (W) 5.7 x (H) 10.0cm
Monitor
Display / Resolution 2.31" TFT LCD / 320 x 240
Data bandwidth 3MHz
Transmission speed 3Mbps
Working voltage DC 5V (4x AAA batteries, not included)
Working current Max. 450mA
Working temperature –10°C~+40°C
Working humidity 15~85%RH
Weight / Dimension 78g / (L) 10.6 x (W) 6.6 x (H) 2.3cm
Camera & Monitor
AF sensitivity (MIC) ≤–38dB
Working frequency 2.400–2.4835GHz
Transmitting power 79.5mW
Receiving sensitivity Min. –80dBm
Modulation/Demodulation mode GFSK
Transmission range Max. 200m (open areas)
Packaging contents 1x Camera, 1x Monitor, 2x Power
Adaptor DC 5V/1A, User manual
No additional notice will be made in case of any minor change. Our company
reserves the right of final interpretation.
Security and Disposal Hints for Batteries: Hold children off batteries.
When a child swallowed a battery go to a doctors place or bring the child
into a hospital promptly! Look for the right polarity (+) and (–) of batteries!
Always change all batteries. Never use old and new batteries or batteries
of different types together. Never short, open, deform or load up batteries!
Risk of injury! Never throw batteries into fire! Risk of explosion!
Hints for Environment Protection: Packages materials are raw materials
and can be recycled. Do not disposal old devices or batteries into the
domestic waste. Cleaning: Protect the device from contamination and
pollution (use a clean drapery). Avoid using rough, coarse-grained
materials or solvents/aggressive cleaner. Wipe the cleaned device
accurately. Distributor: Technaxx Deutschland GmbH & Co.KG, Kruppstr.
105, 60388 Frankfurt a.M., Germany
Table of contents
