Technical Pro PSHAKE3000 User manual

Technical Pro
User Manual for PSHAKE3000 Portable Speaker
QUESTIONS / COMMENTS CALL 888-842-6277 or email [e-mail]

WARNING!
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER ON THIS SPEAKER.
THERE ARE NO USER-SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO A QUALIFIED TECHNICIAN
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to
the presence of dangerous voltage within the product's enclosure that may be of sufficient magnitude to constitute
a risk of electric shock to humans.
Users should exhibit extra safety when this symbol appears in this instruction manual and follow all precautions
as they are stated.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of
important operating and maintenance (servicing) instructions in this manual.
1- Read these instructions.
2- Keep these instructions.
3- Heed all warnings.
4- Follow all instructions
5- WARNING: To prevent fire or electric shock, do not expose this equipment to rain or moisture. Do not store or
operate this product near any liquids.
6- Clean only with a dry cloth.
7- Do not store or operate this product near any heat sources such as radiators, heat registers, stoves, or other
apparatuses (including amplifiers) that produce heat. Keep this product in a well ventilated area.
8- Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding plug has two blades and a round grounding prong. The wide blade or third
prong is provided for your safety. If the provided plug does not fit your outlet, consult an electrician for the
replacement of the obsolete outlet.
9- Protect all the wires connected to this unit from being walked on or pinched, particularly plugs and the point
where they exit from the unit. When removing the cord from the power outlet, remove it by holding the plug, not
by pulling the cord.
10- Unplug the unit during lightning storms or when unused for long periods of time.
11- When wiring this unit and all other equipment used in connection to this unit make sure that all of your
equipment is turned OFF.
12- Once installation and wiring is complete power on all your equipment with the volume and level
controls turned DOWN. Once all the equipment in ON slowly raise the volume or level controls to their
proper positions.
13- Before Placing, Installing, rigging, or suspending any product, inspect all hardware, suspension, cabinets,
transducers, brackets and associate equipment for damage. Any missing, corroded, deformed, or non-load
rated component could significantly reduce the strength of the installation, placement or array. Any such
condition severely reduces the safety of the installation and should be immediately corrected. Use only
hardware which is rated for the loading conditions of the installation and any possible short-term, unexpected
overloading, Never exceed the rating of the hardware or equipment.
14- Consult a licensed, Professional Engineer regarding physical equipment installation, Ensure that all local,
state and national regulations regarding the safety and operation of equipment are understood and adhered to.
15- Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged
in any way, such as power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Introduction
Congratulations and thank you for your purchase of this Technical Pro Powered PA System
with wireless handheld microphone, USB & SD Card inputs. To get the most from your system, we recommend
you review all the information provided in this instruction Manual.
You will see it on page 2 (rear board)
-1-

PSHAKE3000
PSHAKE3000 REAR PANEL
1.FM Antenna.
2.AUX1 Input (RCA): Connect any stereo signal output from a DVD, CD, TAPE,
Mixer etc to this input.
3. AUX2 Input (1/8"): Connect your MP3 player or computer here.
4. Master Volume: Use this knob to adjust the master volume output.
5.TREBLE: Use this knob to increase or decrease the treble effects on the main output.
6.BASS: Use this knob to increase or decrease the bass effects on the main output.
7.Microphone Echo: Use this knob to adjust the microphone's echo.
8.Microphone Volume: Use this knob to adjust the volume of the microphones.
9.Guitar Volume: Use this knob to adjust the volume of the guitar.
10.Power Supply: Only use the power cord provided with the unit to power the unit.
When connecting and disconnecting the power cord, be sure the power of the unit is
off. Connect the cord to the rear of the unit and then connect it to the outlet.
11.Power:Press this button to power the unit on and off.
12.LED Power: Press this button to power the woofer light on and off.The unit must be
powered on for the LED function.
13.Mic. 1 Input /Mic. 2 Input: Dual 1/4” Microphone inputs.
14.Guitar Input: 1/4” Guitar input.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
-2-

PSHAKE3000
PSHAKE3000 FRONT PANEL
1.USB Input: Insert your USB card into this slot. The USB flash drive only read mp3, wma. files. The maximum
storage size of the USB flash drive cannot exceed 32GB.Make sure to set the mode selector button (5) to
USB. When the unit is playing tracks from the USB flash drive the track and elapsed time will display on
the screen.
2.SD Card Input: Insert your SD card into this slot.The unit will only read mp3.,wma. files from SD card.The
maximum storage size of the SD card cannot exceed 32GB.Make sure to set the mode selector button (5)to
SD. When the unit is playing tracks from the SD Card the track and elapsed time will display on the screen.
3. Repeat: This button only control the USB/SD inputs.The unit's default setup is repeating all tracks. Press
this button once to repeat the current track, press again to repeat all tracks.
4. EQ: Press this button to adjust woofer and tweeter sound.This only work for USB/SD card inputs.There are 6
pre-set equalization modes.
5. Mode (Input) Selector: Use this button to switch between all the inputs.
6. Previous Track / - Volume / - FM CH Button: Press this button to go to the beginning of the previous track
on either USB/SD Card or Bluetooth inputs. Press and hold down this button to decrease the volume of the
USB/SD or Bluetooth input. In Tuner mode, press this button to go to the previous stored FM station.
7. Play / Pause Button: Short press to pause the signal from the USB/SD card input,Bluetooth,FM. Press
again to play. In tuner mode,long press to scan stations. The scan will not pause until the unit finds a strong
enough frequency.
8. Next Track / + Volume / + FM CH Button: Press this button to go to the beginning of the next track on either
USB/SD Card or Bbluetooth inputs.Press and hold down this button to decrease the volume of the USB/SD
or Bluetooth input. In Tuner mode,press this button to go to the previous stored FM station.
9.LED Display screen.
Making a Bluetooth Connection
1. Press “Mode” button and set the unit to Bluetooth mode.
2. Open the Bluetooth device's Bluetooth connections and search for Bluetooth
enabled devices.
3. The Bluetooth device should be able to locate a device named “Technical Pro”.
Select this device and connect to it.
4.It is ready to be paired with Bluetooth enabled device. No password and can
connect to the device.
5. Once successfully paired you will be able to play music on speaker directly.
Only one Bluetooth enabled device can successfully be paired with the unit at any
time. To connect a second device please disconnect the first Bluetooth enabled
device.
1
2
9345
678
-3-

PSHAKE3000
PSHAKE3000 WIRELESS MICROPHONE
1. Before powering on the wireless microphone, be sure to set the Wireless
Microphone Volume Knob to zero. Once the wireless microphone is powered
on, slowly turn up the wireless microphone volume knob.
2. If you notice static or distortion in the wireless microphone replace the battery
with a new battery.
3. When not in use, turn off the power of the wireless microphone.
4. If the power indicator does not illuminate properly, check the batteries power
and make sure it is installed correctly.
5.Note: the led on the microphone will flash when the microphone Is powered on
and then the led will turn off. This is the normal Function of this led.
-4-

PSHAKE3000
PSHAKE3000 REMOTE CONTROL
1. Standby.
2."0-9" songs select button,to select songs on USB/SD Card,FM only. In USB/SD mode,press those
buttons to select stored songs according to tracks, sequentially short press two or more buttons
one time to select 2 or more digits tracks.In FM mode,press those buttons to select stored station,
sequentially short press two or more buttons one time to select 2 or more digits station stored.
3. Mode (Input) Selector: Use this button to switch between all the inputs.
4. MUTE Key.
5. EQ Mode Button: Press this button to adjust woofer and tweeter sound,and there are 6 pre-set
modes to select.This only work for USB/SD card inputs.
6. In USB / SD Card Mode, Press this button to repeat the current track, all tracks on the USB/SD
Card.The unit's default setup is repeating all tracks. Press repeat the current track, press again
back to default setup.
7.USB/SD mode.
8. Next Track Button: Press this button to go to the beginning of the next track on USB/SD Card
or Bluetooth.Long Press to Fast Forward USB/SD or Bluetooth. In Tuner mode, press this button
to go to the next stored FM station.
9.Previous Track Button: Press this button to go to the beginning of the previous track on USB/SD
Card or Bluetooth inputs.Long Press to Fast Backward USB/SD or Bluetooth input. In Tuner mode,
press this button to go to the previous stored FM station.
10.Play / Pause Button: Short press to pause the signal from the USB/SD card or Bluetooth,FM.
Press again to play.In tuner mode,long press to scan stations. The scan will not pause until the
unit finds a strong enough frequency.
11.MP3 Volume up control.Only control USB/SD/AUX,FM.
12.MP3 Volume down control,Only control USB/SD/AUX,FM.
1
2
3
4
5
67
89
10
11
12
-5-

PSHAKE3000
The Bluetooth word mark and logos are registered trademarks owned by SIG,Inc. and any use of such marks by
Technical Pro is under license. Other trademarks and trade name are those of their respective owners.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES.OPERATION IS SUBJECT TO THE FOLLOWING
TWO CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL INTERFERENCE AND (2) THIS DEVICE
MUST ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT MAY CAUSE
UNDESIRED OPERATION.
Federal Communications Commission Requirements: The equipment has been tested and found to
comply with the limits for Class B Digital Device, pursuant to part 15 of the FCC Rules.These limits are designed to
provide reasonable protection against harmful interference in a residential installation. This equipment generates
uses and can radiate radio frequency energy and, if not installed and used in accordance with the instruction, may
cause harmful interference to radio communication. However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful interference to radio or television reception, which
can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by
one or more of the following measures:
●Increase the separation between the equipment and receiver.
●Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
●Consult the dealer or an experienced radio/TV technician for help.
THE CHANGES OR MODIFICATIONS NOT EXPRESSLY APPROVED BY THE PARTY RESPONSIBLE FOR
COMPLIANCE COULD VOID THE USER’S AUTHORITY TO OPERATE THE EQUIPMENT. FCC
Radiation Exposure Statement The equipment complies with FCC radiation exposure limits set forth for uncontrol-
led equipment and meets the FCC radio frequency (RF) Exposure Guidelines in Supplement C to OET65. The equip-
ment has very low levels of RF energy that it is deemed to comply without testing of specific absorption ratio (SAR).
The Bluetooth word mark and logos are registered trademarks owned by SIG, Inc. and any use of such marks by
Technical Pro is under license. Other trademarks and trade name are those of their respective owners.
-6-
U S b USB
This will display when the unit is reading the USB flash drive.
S d SD
This will display when the unit is reading the SD flash drive.
0001 02:11 0001 02:11
This will display when the unit is playing tracks from USB or SD card.
The track No. Is 1 and the elapsed time is 2 min 8 sec.
ONE ONE
This will display when the unit is set to repeat current track.
ALL ALL
This will display when the unit is set to repeat all tracks.
LINE LINE
This will display when the unit no signal input .
98.3 98.3
This will display when the unit is playing FM tuner and station frequency is 98.3MHz.
BLUE BLUE
This will display when the input selected is bluetooth.
0002
When the current track No. is 3, pressing the “Previous” button or symbol shows it.
When the current track No. is 1, pressing the “Next” button or symbol shows it.
“Eq 0”“Eq 1”“Eq 2”“Eq 3”“Eq 4”“Eq 5”
This will display when sequentially short pressing“EQ”button or key.
PRU PAU
This will display when pressing the “Pause” button or symbol.
U 30 V 30
This will display when the volume level is det to 30
PSHAKE3000 SCREEN DISPLAY