Techno Trade WT 3000 User manual

WT 3000 - Radio controlled bathroom clock
Instruction manual
OVERVIEW LCD SCREEN
FEATURES
• DCF-77 Radio controlled clock with manual setting option
• 12/24 h time display
• Time zone setting (± 12 h)
• Date and weekday display (7 languages)
• Indoor temperature display in °C/°F
• Humidity-proof, ideal for bathrooms
• Mounting with 4 suction cups, wall mounting or table standing
PUTTING INTO OPERATION
1. Twist and lift the back cover.
2. Remove the battery compartment cover.
3. Insert 1x AA battery matching the polarity (+/-).
4. Close the battery cover and the back cover.
AUTOMATICALLY
TIME SET
Once the battery is installed, the clock will begin searching for the DCF signal. Within 3-8 minutes the clock will receive the
DCF signal and set itself to the exact radio controlled time.
If a signal is not receivable, press the SIGNAL button, the clock will start to search again for the DCF signal.
MANUAL TIME SET
1. Press and hold SIGNAL key for 2 seconds, the clock will stop receive the DCF signal.
2. Press and hold SET key for 2 seconds to enter into time setting mode.
3. The figure to be set will be flashing.
4. Press ▲or to change the settings.
5. Press SET key to confirm and go to next setting. The setting order is: 12/24-hr format, Time zone, Hour, Minute Year,
Month, Day, Language.
6. Press SET again to confirm and exit setting.
Weekday display in 7 languages

TEMPERATURE DISPLAY
The indoor temperature will display within 3-8 minutes automatically after set up.
Press key to switch between the temperature display formats °C and °F.
POSITIONED METHOD
The bathroom clock can be positioned in 3 ways as desired:
A. Pull out the table stand brackets from the rear of the clock, place on table or desk as desired.
B. Hang on the wall by hanging hole.
C. Hang on the smooth place with suction cap.
RESET
Press RESET key to return to the default settings.
PRECAUTIONS
• This main unit is intended to be used only indoors.
• Do not subject the unit to excessive force or shock.
• Do not expose the unit to extreme temperatures, direct sunlight, dust or humidity.
• Do not immerse in water.
• Avoid contact with any corrosive materials.
• Do not dispose this unit in a fire as it may explode.
• Do not open the inner back case or tamper with any components of this unit.
Batteries safety warnings
• Please read all instructions carefully before use.
• Use only alkaline batteries, not rechargeable batteries.
• Install batteries correctly by matching the polarities (+/-).
• Always replace a complete set of batteries.
• Never mix used and new batteries.
• Remove exhausted batteries immediately.
• Remove batteries when not in use.
• Do not recharge and do not dispose of batteries in fire as the batteries may explode.
• Ensure batteries are stored away from metal objects as contact may cause a short circuit.
• Avoid exposing batteries to extreme temperature or humidity or direct sunlight.
• Keep all batteries out of reach from children. They are a choking hazard.
Consideration of duty according to the battery law
Old batteries do not belong to domestic waste because they could cause damages of health and environment. You can return used
batteries free of charge to your dealer and collection points. As end-user you are committed by law to bring back needed batteries to
distributors and other collecting points!
SPECIFICATIONS
Dimensions: Ø 172 x 54mm
Power requirements: 1 xAA Mignon LR06 1.5V
Temperature measuring range: -9°C to +50°C (15,8°F to 122°F)
Resolution: 0.1°C/ 0.1°F
Accuracy: ± 1°C/ 1°F