Techno TH387 User manual

Technos.r.l.ViaBancoraeRimoldi,27-22070Guanzate(CO)ITALY
tel+39031976445fax+39031976680webwww.techno.itemail[email protected]
Forfurtherinformationpleaserefertoproductdatasheetonourweb-site www.techno.it
Ø7.0÷9.0mm
Ø9.0÷12.0mm
ADAPTERHOLE
Ø9.0mm
≤ Ø 6.0 ÷ 7.0 mm
TH387
2-3-4-5POLES
1
6mm
20mm
6mm
20mm
3
Nosguainatura
No unsheathing
3.1
4 5
4.1
4.2
4.3
5.1
5.2
85
Ø23
20mm
Versione perforazione isolante
Piercing terminals version
Code:THP.XXX.XXX
Versione a vite standard
Screw terminals
Code:THB.XXX.XXX(THR.XXX.XXX)
1 1
2 2
3 3
4 4
4POLES
Chiave speciale di fissaggio rapido
Quick-fixing special tool
TH387
IP683bar
MADEINITALY
5 5

Technos.r.l.ViaBancoraeRimoldi,27-22070Guanzate(CO)ITALY
tel+39031976445fax+39031976680webwww.techno.itemail[email protected]
Forfurtherinformationpleaserefertoproductdatasheetonourweb-site www.techno.it
TH387
2-3-4-5POLES
Versione a parete
Panel-mounting version
Visit us on www.techno.it
Accessori su richiesta
Accessories on request
30m
3bar
Omologato e certificato secondo EN61984.
Approved and certified in accordance with EN61984.
Techno s.r.l.ViaBancoraeRimoldi,27-22070Guanzate(CO)ITALY
tel+39031976445fax+39031976680webwww.techno.itemail[email protected]
For further information please refer to product data sheet on our web-site www.techno.it

7.0 ÷ 8.5
9.0 ÷ 13.5
6.0 ÷ 7.0
25 mm
25 mm
25 mm

 8.5 ÷ 9
9.0 ÷ 10.1
6.0 ÷ 7.0
25 mm
25 mm
25 mm
Screw terminals
Screws must be closed using a torque of: 0.8 Nm for pressure wire 4 POLES
Screws must be closed using a torque of: 0.2 Nm for pressure wire 5 POLES
torque 1.0 Nm
torque 2.5 Nm
torque 2.5 Nm
20 mm
20 mm
ATTENZIONE
Verificare la corretta posizione
del gommino come da
immagine seguente