TECHWOOD TRO-1051 User manual


STAND MIXER
Instruction manual
1

IMPORTANT SAFEGUARDS
❑Please read these instructions carefully before use.
❑Keep present instructions for future references.
❑Check that your mains voltage corresponds to that stated on
the appliance.
❑Only use the appliance for domestic purposes and
household or similar applications such as:
- staff kitchen areas, in shops, offices and other working
environments;
- By clients in hotels, motels and other residential type
environments;
- Environment type like : • Farm Houses • Bed and
Breakfast.
❑Only use the appliance in the way indicated in these
instructions.
❑Never use this unit near bathtub, shower, wash-hand basins
or other containers with water.
❑Never use this apparatus near water projections.
❑Never use this apparatus with the wet hands.
❑If, unfortunately the apparatus is wet, immediately withdraw
the cord of the socket-outlet.
❑Inform potential users of these instructions.
❑Never leave the appliance unsupervised when in use.
❑The appliance must be used only for its intended purpose. No
responsibility can be taken for any possible damage caused
by incorrect use or improper handling.
❑Children and persons with disabilities are not always aware of
the danger posed by the use of appliances.
❑This appliance shall not be used by children.
❑This appliance can be used by persons with reduced
physical, sensory or mental capabilities or lack of experience
and knowledge if they have been given supervision or
2

instruction concerning use of the appliance in a safe way and
if they understand the hazards involved.
❑This device is not a toy, do not leave children or people with
disabilities to play with.
❑Cleaning and maintenance must not be made by children.
❑Keep the appliance and its cord out of reach of children.
❑In order to ensure your children‘s safety, please keep all
packaging (plastic bags, boxes, polystyrene etc.) out of their
reach.
❑Caution ! Do not allow small children to play with the foil :
THERE IS A DANGER OF SUFFOCATION !
❑From time to time check the cord for damages. Never use the
appliance if cord or appliance shows any signs of damage.
❑Never immerse the appliance in water or any other liquid for
any reason whatsoever.
❑Never place it into the dishwasher.
❑Never use the appliance near hot surfaces.
❑Do not operate the appliance with a damaged cord or plug, or
after the appliance has been damaged in any manner.
❑If the supply cord or appliance is damaged, it must be
replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
❑Never use accessories, which are not recommended by the
producer. They could constitute a danger to the user and risk
to damage the appliance.
❑Never use any other connector than the one provided.
❑Never move the appliance by pulling the cord. Make sure the
cord cannot get caught in any way.
❑Never wind the cord around the appliance and do not bend it
❑Ensure that the power cord does not come into contact with
hot parts of this unit.
❑Make sure the appliance has cooled down before cleaning
and storing it.
3

❑The temperature of accessible surfaces may be very high
when the appliance is operating. Never touch these parts, of
apparatus, to avoid burning itself.
❑Make sure the appliance never comes into contact with
flammable materials, such as curtains, cloth, etc...& the
power cord and plug do not come in contact with water.
❑Before cleaning, always unplug the appliance from the power
supply and let it cool down.
❑This appliance is not intended to be operated by means of an
external timer or separate remote-control system.
❑Always place the unit on a flat surface. Ensure, also, not to
cover the device and not to put anything on it.
❑Always remove the plug from the wall socket when the
appliance is not in use.
❑When using an extension lead always make sure that the
entire cable is unwound from the reel. Use solely CE
approved extension leads. Input power must be at least 16A,
250V, 3000W.
❑Incorrect operation and improper use can damage the
appliance and cause injury to the user.
❑This device, designed for home use, complies with standards
relating to this type of product.
❑The appliance must be used and rested on a table or flat &
stable surface.
❑The item must not be left unattended when it is connected to
main supply.
❑The item is not to be used, if it has been dropped or if there
are visible signs of damage or if it is leaking.
❑Regarding the instructions for cleaning, thanks to refer to the
below paragraph of the manual.
❑This appliance is only intended for household use.
4

(*) Competent qualified person : after sales department of the
producer or importer or any person who is qualified, approved
and competent to perform this kind of repairs.
SPECIAL WARNING FOR FOOD PROCESSOR
Caution !
● Always disconnect from power supply if it is left unattended
and before assembling, disassembling or during cleaning.
● Switch off the appliance and disconnect from supply before
changing accessories approaching parts that move in use.
● Potential injuries can occur with misuse.
● Care shall be taken when handling the sharp cutting blades,
emptying the bowl and during cleaning.
● Regarding the instructions for cleaning surfaces in contact
with food or oil, thanks to refer to the below paragraph
"cleaning" in manual.
● Regarding the instructions for the use of accessories,
operation times and speed settings, refer to the below
paragraphs.
GENERAL INFORMATION
The symbol "OPEN BOOK" means a recommendation
to read important things contained in the record.
The symbol "BIN" crossed out, abbreviation WEEE
(Waste of Electrical and Electronic Equipment) means
that at the end of life, it should not be discarded with
household waste, but filed to the sorting of the locality.
Waste recovery can help preserve our environment.
5

The symbol "CE" is the guarantee of compliance with
harmonized European standards, voluntary, reflecting
the essential requirements into technical
specifications. These standards are not mandatory
but are guarantees of compliance with essential
requirements.
The symbol "GLASS / FORK" means that the device is
compatible and can come into contact with foodstuffs.
The symbol ROHS (Restriction of use of some
Hazardous Substances) on the Environmental
Protection, certifies that for each of the five hazardous
substances • Lead • Mercury • (hexavalent) chromium •
products for protection against flames PBB and PBDE,
the peak concentration is equal to or less than 0.1% of
the weight of homogeneous material, and 0.01% for the
6th • cadmium.
The symbol "DOUBLE SQUARE" means a double
insulated. A basic insulation and supplementary
insulation. This device requires no connection to the
mass of a protective conductor grounded. The
materials are said : double insulation class II.
The symbol "TRIMAN" indicates that the consumer is
invited to dispose the product as part of a separate
collection (eg recycling bin, waste, voluntary intake
point).
For more information : http://www.quefairedemesdechets.fr
6

TO KNOW IT’S UNIT
1. Head-lift' Button
Releases the mixer head into
the open position for easy
removal and addition of
ingredients, attachments and
mixing bowl.
2. Speed control knob
3. Motor house.
4. Foot pad
5. Motor spindle
6. Bowl cover
7. Whisk
8. Flat beater
9. Kneading hook
10. 5L Mixing bowl
11. Spatula
12. Top cap


7

BEFORE FIRST USE
Before first use, remove the unit and all accessories carefully and paying attention
to the sharp accessories.
Clean with soap and water, bowls and all accessories. Rinse and dry thoroughly.
Clean the outside and inside of the machine cabinet with a damp cloth and wipe
dry.
IMPLEMENTATION
● Unroll the power cord completely.
● Check that the tension in force in the country where you are corresponds to
that indicated on the apparatus.
● Connect the apparatus in a correct socket-outlet, (and connected to the ground
if the unit is Class I), to avoid any danger.
● Disconnect the power source cable before any operation of cleaning of
maintenance and accessories assembly.
● Never modify the appliance in anyway.
Attaching the mixing bowl
1. Make sure the power cord is unplugged and the shift selector is set to '0'.
2. Press the unlock button, lift the arm until the top of the unit is in the open
position.
3. Insert the bowl on the base and turn to the right (clockwise) until it locks into
place.
4. To unblock the bowl, Press the unlock button, Lift the arm until the top of the
unit is in the open position.
1. Turn the bowl to the left (counter clockwise) to release it from the base.
8

Attaching flat beater, whisk or dough hook
The device in open position:
1. To use the mixing hook, place the splashguard on the attachment as shown in
the image and mount it on the spindle.
2. For the other 2 accessories, simply mount them on the axle (under the arm of
the device).
3. Press the lock button and lower the beater head until it locks into the closed
position.
4. Turn the attachment to snap it onto the spindle.
5. Press the attachment upward against the swivel arm and turn it counter
clockwise (To the left) at the same time, until the attachment snaps into place.
NOTES: The accessory must not be loose and it must not be possible to remove
it.
The kneading hook is used for heavy dough, minced meat or other
kneading work.
The flat beater is used to mix lighter types of pasta.
Whisk is used to whip cream, egg whites, etc.
Removing flat beater, whisk or dough hook
1. Make sure the power cord is unplugged and the shift selector is set to '0'.
2. Press the unlock button, lift the arm until the top of the unit is in the open
position.
3. Push the attachment upwards and turn clockwise (to the right) until the
attachment is released from the shaft.
4. Remove attachment from attachment shaft.
To turn the mixer on
Check that the speed selector is in position '0'.
1. Plug the unit into a wall outlet.
2. Turn the selector dial to the desired speed.
3. Once the speed is set, the mixer starts working.
Note: It is recommended to always start at the lowest speed, then increase the
speed as you go.
Place the lid on the bowl to prevent splashing.
9

10

To turn stand mixer off
1. Turn the selector dial to position '0'- the robot stops.
2. Disconnect the robot.
Speeds & mixing accessories
The guide below offers suggestions for speed settings. Start at speed MIN and
then increase speed in accordance with the recipe.
Accessori
es
Picture
Speed setting
Time
Capacity
Kneading
Hook
1-2
30sec at speed1
and 3-5min at
speed 3
1000 g flour and
600 ml water
Flat beater
2-4
5-7min
Whisk
5-6
5-7min
At least egg white of
3 eggs
USE
Put all liquid ingredients in the bowl and then add the dry ingredients.
Always stay near the machine during use.
Always add ingredients as close to the sides of the bowl as possible and not
directly into the rotating accessories.
If the lid is not mounted during whipping, start at low speed until the ingredients
are well mixed. This will reduce the risk of the contents splashing from the
bowl. Always add ingredients as close to the sides of the bowl as possible and
not directly into the rotating tool.
When preparing cake mixtures, use speed level 2 for low speed, speed level 4
for medium speed, and speed level 6 for high speed. To obtain the best results,
mixtures should be processed for the amount of time stated on the package.
Mixtures containing large amounts of liquid must be processed at low speed to
avoid splashing. Increase speed when the mixture has thickened.
For mixing thin types of dough choose the medium speed. Switch off the
machine regularly to clean the sides by using a rubber spatula.
11

Short crust pastry is one of the thickest types of dough, but you can make the
mixing easier by:
● Adding butter or margarine of room temperature
● Adding the ingredients one at a time and mixing the ingredients well before
adding a new ingredient
● Adding one cup of flour at a time
If there are difficulties in mixing the dough, increase the speed.
If by mistake something gets stuck in the tool, or the motor stops, switch off the
machine and remove the plug from the power socket. Solve the problem or
reduce the amount in the bowl. Let the motor cool off for 5 minutes before the
machine is switched on again.
Use the whisk for whipping egg whites, cream, and similar. The whisk is not
suited for thick mixtures such as dough and mashed potatoes.
The machine can whip a minimum of 2 large egg whites / 1 cup of cream.
Whipping is more efficient when the whisk is completely submerged in the
liquid. A hand mixer is recommended for smaller amounts.
Egg whites
Put the egg whites into the completely clean bowl. Attach the bowl to the bowl
bracket and whip the egg whites. Avoid splashing by gradually increasing the
speed to the wanted speed level. See guide below.
Amount Speed Time
2-4 egg whites 6 - MAX 2min
8 egg whites 6 2min
Egg whites are whipped quickly. Keep an eye on the egg whites to avoid
whipping them for too long.
Whipped cream
Pour cold cream into the cooled bowl. Put the bowl into the bowl bracket and
whip. Avoid splashing by gradually increasing the speed to the wanted rate.
Amount Speed Time
1 cup 5-6 1min
½ litre 6-MAX 1min
Cream is whipped fast. Keep an eye during whipping.
12


APPLICATION EXAMPLES
Beating of egg-white
8 egg-white in the BOWL with the WHISK at speed 6.
Beating of cream
600g cream with the FLAT BEATER in the BOWL at speed 4.
Kneading of dough
700g flour
200g chopped almonds
15g salt
28g butter
28g sugar
App.500g water (Temperature 40+/-5℃.)
CLEANING AND MAINTENANCE
Before cleaning, always: switch off the appliance, disconnect the apparatus and
let it cool.
Clean the outside of the apparatus with a sponge or slightly wet linen.
The parts (removable) in contact with food like plate, bowl, forks, Spatula etc. can
be washed in hot water with sponge and soft detergent or put in the dishwasher.
Never plunge the apparatus in water or all other liquid !
Do not use abrasive cleaners, gritting, or metal brush or another cutting object.
STORAGE
-Ensure the unit is completely cool and dry.
-Do not wrap the cord around the appliance, as this will cause damage.
-Keep the appliance in a cool, dry place and out of reach from children.
13

GUARANTEE
Before being delivered, all our products are subjected to a rigorous control.
This apparatus is guaranteed 24 months starting from the date of purchase by the
consumer.
The documents in proof of guarantee are :
• The invoice and
• The filled and stamped warrantee plate (located on side or bottom of the gift
box). Without these documents in proof, no free replacement, nor no free repair,
can be carried out.
During the warranty period, we deal for free, the defects of the apparatus or the
accessories, rising from a defect of materials or manufacture by repair or,
replacement. The services within the framework of the guarantee do not involve
any extension of the warranty period and does not give right to a new guarantee !
In the event of recourse to the guarantee, bring back the complete apparatus to
your retailer, in its original packing, accompanied by the proofs of purchase.
The breakage of parts out of glass or plastic is, in all the cases, not warranted.
Defects on the accessories or the wearing parts (for example: coals of engines,
hooks, drive belts, remote control of replacement, teeth brushes of replacement,
webs etc) as well as cleaning, maintenance or it replacement of wearing parts are
not guaranteed and are thus to pay !
In the event of foreign intervention, the guarantee becomes null and void.
After flow of the warranty period, repairs can be carried out, against payment, by a
specialized trade or a repair service.
14

SPECIFICATIONS

Power supply 220-240V~ 50/60Hz
Power 1000W
Norm Class II
Bowl Capacity 5 L (1Kg of flour 600ml of water)
Made in PRC
The characteristics can change without preliminary preventing
This device complies with EC directives, it was controlled according to all current
European directives, applicable such as: electromagnetic compatibility (EMC) and
low voltage (LVD).
This device has been designed and manufactured in compliance with the latest
regulations and technical requirements for safety.
CAUTION: In order to minimize the risks of electric shock, In the event of
breakdown, not to open the case but to call upon a qualified technician
for repairs.
Imported by Sotech International
" LE PERIPOLE " N°A107
33, Avenue du Marechal de Lattre de Tassigny
94120 Fontenay-sous-Bois - France

15