TECshow ION 740z User manual

P. 1
| Tecshow ION 740z
USER MANUAL / MANUAL DE USUARIO
PLEASE READ THE INSTRUCTIONS CAREFULLY BEFORE USE
POR FAVOR LEA LAS INSTRUCCIÓNES ANTES DE USAR
I O N 74 0z
Moving head powered by 7 x 4-in-1
OSRAM® 40W LEDs

P. 2
Tecshow ION 740z |
ION 740z
Moving head powered by 7 x 4-in-1 OSRAM® 40W LEDs
ION 740z is a versatile moving head powered by 7
x 4-in-1 OSRAM® 40W LEDs with a variable zoom that
goes from 4º to 36º. Versatility and power output get
new meanings thanks to the enormous action ca-
pacity brought by its beam angle variation, the pixel
by pixel control and it’s outstanding lighting perfor-
mance, with 43,000 lux @ 15 . (4º). This moving head
is equipped with quad-color LEDs, enabling a smooth
RGBW mix with no multicolor shadows and assuring a
real long life performance. Ion 740Z comes also with
preset programs on 2700K, 3200K, 4200K, 5600K and
8000K color temperatures and it’s RDM-compatible
allowing the user to monitor and address the unit re-
motely.
Specications
Source & Optics
• Light Source: 7 x 4-in-1 OSRAM® 40W LEDs
• LEDs life: 60,000 hours
• Beam angle: 4° to 36°
Photometric data
• Luminous ux: 7000 lumen
• 4º beam angle: 43000 lux @ 3m (10 .)
• 36º beam angle: 2400 lux @ 3m (10 .)
Eects & Functions
• Pixel by Pixel control
• Dimmer: Full range 0-100%
• Strobe eect
• Quad-color LED technology: Smooth RGBW mix
with no multi colored shadows
• Vivid, saturated and uniform colors
• Color temperature presets: 2700K, 3200K,
4200K, 5600K & 8000K
Control
• DMX Channels: 19/21/22/51
• Advanced RDM Function
• Indicated temperature for base, arm & lamp
• IC backup communication
• RDM read voltage, current power consump-
tion of the lamp
• Soware update vía DMX
• Fan speed based on temperature
Movement
• Pan: 540° / 630º
• Tilt: 265°
• 3-phase motor
• 16-bit resolution
• Auto repositioning
Physical
• DMX Connectors: 2 XLR connectors (XLR-3 In/
Out) & 2 RJ45 connectors (Ethernet In/Out)
• Power supply connectors: PowerCON® In/Out
• 2.4 inches LCD graphi
• c display
• Dimensions: 324x250x456 mm. / 12.7x9.8x17.9
in.
• Weight: 12 Kg. / 26.4 Lbs
• Dimensions: 264.5x168x368 mm. /
10.4x6.6x14.4 in.
• Weight: 5.1 Kg. / 11 Lbs.
1. OVERVIEW
English version

P. 3
| Tecshow ION 740z
Before unpack the xture, pls make sure that the packing is
in good condition, following items will be found in the box:
• The xture
• This users guide
• 3m DMX cable
• 1.5m power cable with powercon
• Omega bracket for hanging installation
• Safety chain
English version

P. 4
Tecshow ION 740z |
2. DESCRIPTION OF THE DEVICE
English version
1. Project lens
2. Head
3. Arm
4. Base
5. Display
6. Foot stand
7. Operation button
8. Handel
1
2
3
4
5
6
7
8
9. Wireless indicator
10. Mic
11. Le button
12. Battery indicator
13. Up button
14. Down button
15. Enter button
16. Right button
17. Ethernet out
18. 5-pin DMX in
19. Ethernet in
20. 5-pin DMX out
21. Powercon in
22. Fuse
910 11 12
17
13
18
14
19
15
20
16
21 22

P. 5
| Tecshow ION 740z
Before operate this unit, please carefully read this users guide and keep if needed in future. It’s
necessary to respect following rules.
The disposal of the device aer lifecycle could damage the environment, need to take it to spe-
cial company for recycling or return to authorized dealer.
The products referred to in this manual conform to the European Community Directives and
are therefore marked with CE logo.
Keep this device away from children and unauthorized users, the manufacturer will not take
responsibility for the damage due to any disregard of the information provided in this manual
and wrong operation.
Before operate the device, pls make sure the xture is in good housing, ensure pan and tilt can
rotate in its complete range.
Please make sure minimal 0.5m distance need to kept between the xture to any ammable
material.
The device can only run with 100-240v voltage, 50/60Hz power, don’t connect to any other
wrong power. Disconnect the device from main power before open the shield or maintenance.
The device is designed only for indoor usage, pls keep it away from moisture. Do not expose
the device under the sun or directly to any other lighting source.
Never look directly into the projecting lens when the xture is power on, the light may trigger
epileptic seizures in photosensitive persons or persons with epilepsy. Especially at beam eect,
extreme caution and observance of these safety instructions is mandatory.
Don’t put or install the device on a surface that subject to vibration or bumps.
Ta=45°c The device is supposed to work in the temperate range -15° C and +45° C, do not use the device
when the temperate exceed this range.
The lens, shield need to be replaced when obviously broken, never use the device when the
shield is not completed closed.
Safety I class device, need to be earth connected.
When the xture is hanged overhead, the safety rope must be xed to the bottom of the device
to the appropriate xing point.
Always carry the device by the handles, do not take the head or arm directly for transportation.
3. SAFETY AND MAINTENANCE INFORMATION
English version
0,5m
Safety Info

P. 6
Tecshow ION 740z |
• Operation only allowed to qualied person,
damages due to unprofessional operation or re-
move of any parts inside will not be considered
in warranty service. There are no serviceable
parts inside the device or package, service only
leaves to authorized dealers.
• Never allow the optical components contact
with oil, fat or any other liquid.
• A regular clearance of the device is needed for
long-term usage, this is very helpful to maintain
the lifetime and brightness need to use a so
and lint-free cloth to clean the optical system,
fan and air owing tunnel.
Trouble Shooting
Maintenance
English version
Problems Possible reasons Checking or solutions
Device not power up Powercon or power cable damaged
Faulty power supply
Change a good power cable to try
Replace new power supply
Pan/Tilt error or vibrate
Faulty Pan/Tilt PCB
Faulty opto sensor
Cable loosen
Replace PT001 PCB
Replace opto sensor OP001
Check the cable connect to OP001
LED o
Temperature protection
Fan not working
Faulty LED
Dimmer and strobe set at 0
Faulty power supply
Check the temperature from menu
Check the fan speed info from menu
Replace new LED
Set dimmer and strobe channel at 255
Replace new power supply
Device not response
to DMX
Faulty communication IC
Faulty display PCB
Wrong DMX addressing
Faulty DMX cable
Replace the IC with back-up one in the
display PCB
Replace new display PCB
Check the address and setting
Change to a good DMX cable

P. 7
| Tecshow ION 740z
Need to replace with same type and rating, which
originally installed in the device.
• Step One: Unplug power cable from main
power.
• Step Two: Unscrew the fuse holder out of the
housing with a screwdriver.
• The device could be either put on a
solid and even Surface, or mounted
upside down or sideways like le
picture.
• The mounting place must be suicient
stable and be able to support a weight
of 10 times of the unit’s weight. When
the xture is hanged, always addition-
ally secure the device with the safety
chain, fasten the safety rope at a suit-
able position so that the maximum fall
of the projector will be 20 cm.
• Step Three: Remove the broken fuse and re-
place with an exact same type of new fuse.
• Step Four: Insert the fuse holder back to the
housing and screw tight and reconnect power.
Replacement of the fuse
English version
4. INSTALLATION

P. 8
Tecshow ION 740z |
English version
• Step one: Installation the clamp onto the
omega bracket;
• Step two: Install the clamp and bracket on the
bottom of panel, fasten the quick-locks;
• Step three: Install the whole device onto ap-
Meaning of the icon in menu
propriate truss and fasten the clamps, tight the
safety rope with the truss or other xing point
at a suitable position that drop down distance
not exceed 20 cm.
How to do mounting installation
5. CONTROL MENU
CONNECT LIGHT INFOMATION SET PROGRAM

P. 9
| Tecshow ION 740z
English version
Default setting shadowed. mark with 1can be basic reloaded, 2 be program reloaded, 3 can be private
reloaded.
Menu tree
Connect
DMX Address 1XXX DMX address setting
Wireless 1(Wireless Module) Wireless Enabled
Artnet 1(Only Artnet Module) Artnet Enabled
Light
Max Temperature 180~139°C /176~282°F Lamp o if temperature continu-
ously over for 2minutes
Lamp Adjust 1PAN Adjust value of channel
Information
Time Info. Current XXXX (Hours)
Fixture Life XXXX (Hours)
Lamp Life XXXX (Hours)
Fixture boot time
Fixture total run time
Lamp total run time
Lamp Info. Voltage
Current
Power
HID Lamp Information
Temperature Near Lamp Temp (depends on
xture)
Temperature Sensors
Fans Speed Near Lamp Fan (depends on
xture)
Fan speed Sensors
Channel Value PAN Display value of channel
Error Message Pan, Tilt Error channels
Fixture Model xxxxxxxxxxxx Display model brand and model
Soware Ver 1U01 V1.0.00 Version of each IC
Set
Reset All
Pan&Tilt
:
Reset all
Reset Pan&Tilt
:
Movment Pan Reverse 1
Tilt Reverse 1
Pan Degree 1
Encoders 1
Pan/Tilt Mode 1
ON/OFF
ON/OFF
630/540
ON/OFF
Stand/Smooth
Pan Reverse
Tilt Reverse
Choose Pan Degree
Encoder wheel on/o
Choose pan/tilt mode
UI Set Mic Sens. 3
No Signal 1
Temperature. C/F
1
Fans Mode 1
Hibernation 1
Backlight 1
Flip Display 1
Display Bright 3
Brand Show 1
Key Lock 1
Language 3
0~99%,60%
Close/Hold/Auto/
Music
Fahrenheit /Celsius
Auto Speed /High
Speed
OFF, 01M~99M, 15M
02~60m 02m
ON/OFF
00~31 10
ON/OFF
ON/OFF
En/Fr/Sp/简/简
Sensitivity of Mic
Mode when no signal
Temperature at °C/°F
Fans mode
Sleeping mode
Show backlight time
Display 180°reverse
Display Brightness
Show brand or not
Key lock on/o
Language Select
Fixture Set Theater Mode ON/OFF Theater Mode
Users User Mode 1Standard
Extended
:
User
Standard mode
Extended mode
:
User program mode
Edit User 3Max Channel = XX
PAN = CH01
:
Edit users mode
Calibration 3-Password-
Pan
:
=XXX
=XXX
:
Password: 050
Calibrate channel value
Fixture ID 3Name
-Password-
PID Code
Name
Password: 050
Set PID of RDM
Wireless Set 1
(Wireless Module)
DMX On Cable
Reset Connect
ON/OFF
ON/OFF
DMX Send Out
Reset Connect
Ethernet Set 3
(Only Artnet Mod-
ule)
IP Address
IP Mask
Universe
DMX On Cable
2.x.x.x
255.0.0.0
0
ON/OFF
Ethernet Set
(Only Artnet Module)
Reload Default Basic Reload(1)
Program Reload(2)
---Password---
Private Reload(3)
All Reload
Update Fixture
ON/OFF
ON/OFF
XXX
ON/OFF
ON/OFF
ON/OFF
Basic Reload
Program Reload
Password: 050
Private Reload
All Reload
Soware upgrade
P. 9
English version | Tecshow ION 740z

P. 1 0
Tecshow ION 740z |
English version
Set Reset All
Pan&Tilt
:
Reset all
Reset Pan&Tilt
:
Movment Pan Reverse 1
Tilt Reverse 1
Pan Degree 1
Encoders 1
Pan/Tilt Mode 1
ON/OFF
ON/OFF
630/540
ON/OFF
Stand/Smooth
Pan Reverse
Tilt Reverse
Choose Pan Degree
Encoder wheel on/o
Choose pan/tilt mode
UI Set Mic Sens. 3
No Signal 1
Temperature. C/F 1
Fans Mode 1
Hibernation 1
Backlight 1
Flip Display 1
Display Bright 3
Brand Show 1
Key Lock 1
Language 3
0~99%,60%
Close/Hold/Auto/
Music
Fahrenheit /Celsius
Auto Speed /High
Speed
OFF, 01M~99M, 15M
02~60m 02m
ON/OFF
00~31 10
ON/OFF
ON/OFF
En/Fr/Sp/简/简
Sensitivity of Mic
Mode when no signal
Temperature at °C/°F
Fans mode
Sleeping mode
Show backlight time
Display 180°reverse
Display Brightness
Show brand or not
Key lock on/o
Language Select
Fixture Set Theater Mode ON/OFF Theater Mode
Users User Mode 1Standard
Extended
:
User
Standard mode
Extended mode
:
User program mode
Edit User 3Max Channel = XX
PAN = CH01
:
Edit users mode
Calibration 3-Password-
Pan
:
=XXX
=XXX
:
Password: 050
Calibrate channel value
Fixture ID 3Name
-Password-
PID Code
Name
Password: 050
Set PID of RDM
Wireless Set 1
(Wireless Module)
DMX On Cable
Reset Connect
ON/OFF
ON/OFF
DMX Send Out
Reset Connect
Ethernet Set 3
(Only Artnet Mod-
ule)
IP Address
IP Mask
Universe
DMX On Cable
2.x.x.x
255.0.0.0
0
ON/OFF
Ethernet Set
(Only Artnet Module)
Reload Default Basic Reload(1)
Program Reload(2)
---Password---
Private Reload(3)
All Reload
Update Fixture
ON/OFF
ON/OFF
XXX
ON/OFF
ON/OFF
ON/OFF
Basic Reload
Program Reload
Password: 050
Private Reload
All Reload
Soware upgrade

P. 11
| Tecshow ION 740z
English version
Program
Play 1DMX Receive
Slave Receive
Sequence
Music
Slave Receive 1,2,3
Master / Alone
Master / Alone
DMX Receive
Choose slave posi-
tion
Run Sequence
Music mode
Select Chase 2Chase Part 1
Chase Part 2
Chase Part 3
Chase 1 ~ 8 Chase 1
Chase 1 ~ 8 Chase 2
Chase 1 ~ 8 Chase 3
Select and run auto
program
Edit Chase 2Chase 1
:
Chase 8
Chase Test
Step 01
Step 64
=SCxxx
=SCxxx
Test
Beginning scene
Ending scene
Edit Scenes 2Edit Scene 001
~ Edit Scene 250
Pan,Tilt,……
--Fade Time--
--Secne Time--
DMX Input
=xxx
=xxx
=xxx
Input manual scene
Modify manually
fading time
Modify manually
scene time
Input scene from
exterior controller
Scenes Record ScXX=>ScXX Auto Input scenes
6. DMX CONNECTION AND DMX PROTOCOL
DMX addressing
• The device is controlled by universal DMX 512
protocol, DMX address is the start channel
used to receive instructions from the exter-
nal controller. For independent control, each
xture must be assigned its unique address
control channels. For example, this device has
four channel modes: 22/51/19/21, if we set
the mode at standard 22 channels mode, and
there are several models need to be inde-
pendently controlled, we just simply address
rst xture at 1, and second xture at 23, third
one at 45, etc.
• If the devices have the same address, they will
behave synchronically.
• DMX addressing is limited, don’t set the address
so high that without enough control channels
for the xtures.
• Display is ashing when no DMX signal is re-
ceived.

P. 12
Tecshow ION 740z |
English version
This device is equipped with 3-pins DMX in and out sockets only.
The termination is prepared by soldering a 120Ω resistor between pins 2 and 3
Pin1: GND
Pin2: SIG (-)
PIN3: SIG (+)
Pin4: N.A.
Pin5: N.A.
Connection: use DMX cable with 5 pin XLR-plugs to connect the controller with the xture or one xture with
another.

P. 13
| Tecshow ION 740z
English version
DMX chart
Channel Name Function Min
DMX
Max
DMX
St Ex Ba1 Ba2
1 1 1 1 Pan Pan Coarse 0255
2 2 2 Pan ne Pan Fine 0 255
3 3 2 3 Tilt Tilt Coarse 0255
4 4 4 Tilt ne Tilt Fine 0 255
5 5 3 5 Movment Speed fastest to Slowest 0255
6Movment Function
Normal 015
Movement With Backout 16 31
TBD 32 255
6 7 Shutter Function
Normal Shutter Functions 0 15
Pulse-eect Forward 16 31
Pulse-eect Reverse 32 47
Random Strobe 48 63
TBD 64 255
7 8 Shutter
Normal Shutter Functions
Close 031
Strobe Rate (slow to fast) 32 223
Open 224 255
Pulse-eect Forward
Close 031
Strobe Rate (slow to fast) 32 223
Open 224 255
Pulse-eect Reverse
Close 031
Strobe Rate (slow to fast) 32 223
Open 224 255
Random Strobe
Close 031
Strobe Rate (slow to fast) 32 223
Open 224 255

P. 14
Tecshow ION 740z |
English version
4 6 Shutter
Shutter closed 031
No function (shutter open) 32 63
Strobe eect slow to fast 64 95
No function (shutter open) 96 127
Pulse-eect in sequences 128 159
No function (shutter open) 160 191
Random strobe eect slow
to fast
192 223
No function (shutter open) 224 255
8 9 5 7 Dimmer Dimmer (0->100%) 0255
910 6 8 Virtual Color
Function
On Function 0 15
CTC Function 16 31
Forward Spin 32 47
Reverse Spin 48 63
Continuous 64 79
Color Bounce 80 111
TBD 112 255
10 11 7 9 Virtual Color 1
CTC Function
Colour Temperature Correc-
tion 2000K->2700K
0223
White 3200K 224 231
White 4200K 232 239
White 5600K 240 247
White 8000K 248 255
Forward Spin
Rainbow Eect (Slow->Fast) 0255
Reverse Spin
Rainbow Eect (Slow->Fast) 0255
Continuous & Color Bounce
Black 0 0
Red 1 1
Green 2 2
Blue 3 3
White 4 4
Red=0, Green->up,Blue=-
full,White=0
546
Red=0, Green=full,-
Blue->down,White=0
47 88

P. 15
| Tecshow ION 740z
English version
Red->up, Green=full,-
Blue=0,White=0
89 130
Red=full, Green->down,-
Blue=0,White=0
131 172
Red=full, Green=0,-
Blue->up,White=0
173 214
Red->down, Green=0,Blue=-
full,White=0
215 255
11 12 810 Virtual Color 2
(Only On Color
Bounce)
Color Bounce
Black 0 0
Red 1 1
Green 2 2
Blue 3 3
White 4 4
Red=0, Green->up,Blue=-
full,White=0
546
Red=0, Green=full,-
Blue->down,White=0
47 88
Red->up, Green=full,-
Blue=0,White=0
89 130
Red=full, Green->down,-
Blue=0,White=0
131 172
Red=full, Green=0,-
Blue->up,White=0
173 214
Red->down, Green=0,Blue=-
full,White=0
215 255
12 13 911 Red-All Red 0->100% 0255
13 14 10 12 Green-All Green 0->100% 0 255
14 15 11 13 Blue-All Blue 0->100% 0255
15 16 12 14 White-All White 0->100% 0 255
16 17 13 15 Zoom Big angle -> small angle 0 255
17 18 14 16 Foreground No Function 0 15
Foreground Color 16 255
18 19 15 17 Background No Function 0 15
Background color 16 255
19 20 16 18 Pattern
On Pattern 0 15
Pattern control 16 31
Pattern Eect 1~14 32 255
20 21 17 19 Pattern Speed Pattern control

P. 1 6
Tecshow ION 740z |
English version
Picture Eect 1-250 3252
Pattern Eect
Slow-> Fast 0255
21 22 18 20 Dimmer Fade 0->100% 0255
23 Red 1 Red 0->100% 0255
24 Green 1 Green 0->100% 0 255
25 Blue 1 Blue 0->100% 0255
26 White 1 White 0->100% 0 255
47 Red 7 Red 0->100% 0255
48 Green 7 Green 0->100% 0 255
49 Blue 7 Blue 0->100% 0255
50 White 7 White 0->100% 0 255
22 51 19 21 Control
Normal 0 7
Reset All 815
Pan&Tilt Reset 16 23
TBD 24 47
Other Reset 48 55
Display O 56 63
Display On 64 71
TBD 72 79
TBD 80 87
Hibernation 88 95
TBD 96 255

P. 17
| Tecshow ION 740z
English version
7. UNIQUE FEATURES
8. DIMENSIONS DRAWING
• RDM, stand for “Remote Device Management”,
with this function, users can realize remote
control of the device, such as remotely chang-
ing DMX address, reverse pan/tilt setting,
check a lot of useful information such as tem-
perature, power consumption, fan speed. Etc.
Every single device has a unique RDM code
before le factory to distinguish from each
other, usually not suggest users change this
code freely.
• Soware upgrade function via DMX cable, if
there is any new rmware for this device come
out, it can be upgraded simply via a soware
upgrade box, no need to change any mechan-
ical parts. The upgrade box is not included in
the package, if need any further assistance pls
just contact authorized dealers.
• Hibernation, the device will enter sleeping
mode if activated aer a period of disconnect-
ing DMX signal to save the power consumption,
and will return immediately as soon as the DMX
signal is sent again.
• Display back-up communication IC, there is
a back-up communication IC installed in the
display PCB, so users could replace at once if
the working one is broken, no need to wait long
time from service.
• Display ip, by press up and down button for
more than 3 seconds, the display will ip auto-
matically, this function is useful to read menu
conveniently when device is hanged.

P. 18
Tecshow ION 740z |
Vesión Español
1. DESCRIPCIÓN
ION 740z
Cabezal móvil que tiene 7 LEDs OSRAM® 4-en-1 de 40W
ION 740z es un compacto y versátil cabezal móvil que
tiene 7 LEDs OSRAM® 4-en-1 de 40W con un ángulo de
zoom variable de 4º a 36º. Con la capacidad de acción
que le da su amplia variación del haz, su control pixel
por pixel y un ujo luminoso de 43.000 lux a 3M (4º),
este cabezal llegó para redenir la versatilidad y
potencia de los equipos de su tipo. Con su tecnología
LED de cuatro colores, por otra parte, el equipo
habilita una mezcla RGBW suave sin sombras multi-
color, garantizando una larga durabilidad y una repro-
ducción del color óptima. Ion 740Z cuenta, además,
con programas preestablecidos en temperaturas de
color de 2700K, 3200K, 4200K, 5600K y 8000K y posee
función RDM, haciendo posible su monitoreo y direc-
cionamiento remoto.
Specicaciones
Fuente & Ópticas
• Fuente de luz: 7 LEDs 4-en-1 OSRAM® de 40W
• Vida útil promedio: 60,000 horas
• Ángulo de haz: 4° a 36°
Información fotométrica
• Flujo luminoso: 7000 lumen
• 4º Ángulo de haz: 43000 lux @ 3m (10 pies)
• 36º Ángulo de haz: 2400 lux @ 3m (10 pies)
Efectos y Funciones
• Control pixel por pixel
• Dimmer: Rango completo 0-100%
• Efecto estrobo
• Tecnología LED 4-en-1: Mezcla RGBW suave sin
sombras
• Colores vividos, saturados e uniformes
• Preseteos de temperatura de color: 2700K,
3200K, 4200K, 5600K & 8000K
Control
• Canales DMX: 19/21/22/51
• Función RDM avanzada
• Indica temperatura de la base, brazo & lámpara.
• Comunicación de respaldo IC
• Lectura de voltaje RDM, consumo de corriente
actual de la lámpara
• Actualización soware vía DMX
• Velocidad del ventilador acorde a la
temperatura
Movimiento
• Pan: 540° / 630º
• Tilt: 265°
• Motor de 3 fases
• Resolución de 16-bit
• Reposicionamiento automático
Físico
• Conectores DMX: 2 conectores XLR (XLR-3 de
entrada & salida) y 2 conectores RJ45 (Ethernet
de entrada & salida)
• Conectores de alimentación: PowerCON® Entra-
da/Salida
• Display LCD de 2.4 pulg.
• Dimensiones: 324x250x456 mm. / 12,7x9,8x17,9
pulg.
• Peso: 12 Kg. / 26,4 Lbs.

P. 1 9
| Tecshow ION 740z
Versión Español
Antes de abrir el embalaje, revise que se encuentre en buen
estado. La caja contiene:
• 1 equipo.
• 1 manual del usuario.
• 1 cable DMX de 3m.
• 1 cable de suministro eléctrico, conector
powerCON de 1.5m.
• Soporte Omega para instalación.
• Cable de seguridad.

P. 2 0
Tecshow ION 740z |
Versión Español
2. DESCRIPCIÓN DEL EQUIPO
1. Lente
2. Cabezal
3. Brazo
4. Base
5. Pantalla LCD
6. Soporte
7. Teclas de operación
8. Manija
1
2
3
4
5
6
7
8
9. Indicador inalámbrico
10. Micrófono
11. Tecla de desplazamiento hacia la izquierda
12. Indicador de batería
13. Tecla de desplazamiento hacia arriba
14. Tecla de desplazamiento hacia abajo
15. Tecla Enter
16. Tecla de desplazamiento hacia la derecha
17. Salida Ethernet
18. Entrada DMX de 5 pines
19. Entrada Ethernet
20. Salida DMX de 5 pines
21. Conector Powercon de entrada
22. Fusible
910 11 12
17
13
18
14
19
15
20
16
21 22