Tecsun DTR-762 User manual

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
www.tecsunradios.com.au
English
DAB+/FM Digital Radio Receiver
User Manual

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Safety Instructions:
1. Do not use this radio near water.
2. Clean with dry cloth.
3. Do not block any ventilation
openings.
4. Do not use near heat objects.
5. Use accessories provided by
manufacturer.
6. Do not allow this unit to be exposed
to water, steam, sand or other
environmental hazards.
7. Do not leave your radio where
excessive heat could cause damage
such as expose to direct sunlight in a
1

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
parked car where the heat from the
sun can easily build up to extreme
levels and damage the unit
Specification:
Model: DTR-762
Radio: Digital DAB+ & FM
Dimension: 113x69x25mm
Weight(Net): Approx. 120g (Included
battery)
DAB+ Frequency: Band III
(174.0-239.0MHz)
FM Frequency: 87.5-108MHz with RDS
Number of Presets: 99 for DAB+ and 30
for FM
Speaker: 4 Ω1.5W (RMS)
2

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Output Power: 32Ω0.1W (headphone)
Power Source: DC Adaptors (5V, 0.5A)
Charging Time: Approx. 7 Hours
Usage Time: Approx 10Hours (Speaker
mode) / 18Hours (Headphone mode)
Approvals: CE marked. RoHS marked.
Compliant with the EMC and Low Voltage
Directives (2004/108/EC and 2006/95/EC),
ETSI EN300 401 compliant
3

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
4

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
（1）Ear Phone Jack
（2）Speaker
（3）Charge Socket
（4）LCD Display
（5）Power/Band Button
（6）Sleep/Display(Backlight)Button
（7）Channel+ Button
（8）Channel- Button
（9）Volume+ Button
（10）Volume- Button
（11）Tune- Button
（12）Tune+ Button
（13）Memory/Preset Button
（14）Scan/Stereo or Mono Button
（15）Telescopic Antenna
（16）Reset
CONTROLS:
5

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Charging the radio:
The DTR-762 features a 3.7V, 2000mAh
rechargeable Lithium battery.
The DTR-762 is supplied with a USB
power cable for charging.
Before first time to operate, please fully
charge the battery.
1. Plug the USB power cable into the
socket of the radio, connect USB to
power supply such as computer or
USB DC adaptors.
2. The radio will begin charging the
battery. Charging time is
approximately 7 hours.
3. The charging icon will flash during
charging and stop charging when the
radio is fully charged.
6

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Speaker:
The DTR-762 features a high-quality 4 Ω
2W speaker.
Headphones:
The DTR-762 features a pair of
high-quality earpieces.
The 3.5mm jack is located on the
left-hand side of the radio, it is provided
for use with stereo headphones or
earpieces.
Important:
Excessive volume from earpieces or
headphone may cause damage to your
ears.
7

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Operating your radio:
1. Make sure the battery is charged.
2. Press and hold the
button to turn on the radio.
3. The display will show ‘CORUS’ logo
and enter DAB mode ( or FM mode if
you selected FM before turning off).
4. Adjust the volume to comfortable
level (Volume Level: 0-32).
DAB+/FM Band Select:
1. Press button to
select DAB+ or FM mode.
2. When you turn off the radio, band
mode will be memorized.
8

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Search and select channels : DAB+
mode
1. Make sure the radio is in DAB+
mode.
2. Press once the “SCAN/ST” button to
activate the quick scan function.
3. Press and hold the “SCAN/ST”
button to activate the full scan of all
available radio channels and all the
scanned channels will be saved in a
channel list.
4. Press the “CH+” or “CH-” button to
select the desired channels from the
list.
9

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Presets: DAB+ mode
1. Press and hold the “MEM/PRE”
button, then “Null Memory 01” will
show on the display if the position is
empty whereas it will show the
name of the channel if it is already
occupied. Press the “CH+” or “CH-”
button to select the position to save,
then press “MEM/PRE” button again
to confirm.
2. To play the preset channels, press
once the “MEM/PRE” button and
select the preset channel(the name
of channel will be displayed) by
pressing the “CH+” or “CH-” button,
then press “MEM/PRE” button again
to confirm.
10

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
3. Max. 99 preset channels for DAB+
radio mode.
Service Information: DAB+ mode
The Service Information display -
Technical information on the current
status of the station being broadcast
While listening to DAB+, the display will
show the followings if applicable
1. Program type
2. Multiplex Name
3. Time
4. Channel Name
5. Frequency
6. Volume level
7. Signal Strength
11

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Search and select channels : FM
mode
1. Press and hold the
button to turn on the radio.
2. Press once the
button to switch to FM Mode.
3. Press and hold “TUNE+” and
“TUNE-“ to search the nearest
channel automatically.
Changing audio mode:
1. Press once the “SCAN/ST” button to
change Stereo or Mono audio mode,
“ST” will be displayed when Stereo
mode is selected.
12

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Manual tuning: FM mode
1. Press once the “TUNE+” or TUNE-”
button to search the channel
manually.
Service Information: FM mode
While listening to FM radio, the display
will show the followings if applicable
1. Program type
2. Frequency
3. Channel Name
4. Volume level
5. Signal Strength
6. Stereo / Mono
13

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Presets: FM mode
1. Press and hold the “MEM/PRE”
button, then “Null Memory 01” will
show on the display, press the “CH
+” or “CH -” button to select the
position to save, then press
“MEM/PRE” button again to confirm.
2. To play the preset channel, press
once the “MEM/PRE” button and
select the preset station by press the
“CH +” or “CH -” button, then press
“MEM/PRE” button again to confirm.
3. Max. 30 preset channels for FM
radio mode.
14

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Radio Antenna:
1. For DAB+ and FM reception there is
a built-in telescopic antenna at the
rear of the unit.
2. Extend the antenna and move it
around to obtain the best reception.
3. If the reception is still unsatisfactory,
pull the antenna as long as possible.
Sleep mode:
1. In the DAB+ or FM Mode, press
“SLP/DISP” button will activate the
sleep function. - The initial sleep
time is 5 minutes, each press will
increase 5 minutes (from 5 minutes
to OFF), sleep time in red will be
shown on the middle top of the
display.
15

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
2. Press the “SLP/DISP” button until the
sleep time in red disappeared to
cancel the sleep function.
3. The radio will be powered off when
the timer reduces to 0 of sleep time.
Select Language:
1. Set the display language.
2. Press and hold the “MEM/PRE” and
“VOL+” button simultaneously, then
“ LANGUAGE ” menu will show on
the display, press the “CH+” or “CH-”
button to select Language.
3. Press once the “SLP/DISP” button to
save.
16

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Backlighting:
1. Set how long backlighting remains
on.
2. Press and hold the “SLP/DISP”
button, then “BACKLIGHT” menu will
show on the display, press the “CH+”
or “CH-” button to select backlight
timeout period.
3. Press once the “SLP/DISP” button to
save.
Soft Reset:
1. If the device does not function or
you experience some sluggishness
with your device, you can press
“RESET” button at the back of the
device with thin-shaped
insulator(such as toothpick) to
restart the device.
17

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
Factory Reset:
1. Press and hold the “SLP/DISP”
button and press the “SCAN/ST”
button at the same time to activate
the factory reset function.
2. Factory reset function will clear all
the preset radio channels.
Power Off and Maintenance:
1. Please shut down the power when
not in use.
2. Please do not wipe it with rough
materials.
3. Please do not attempt to open the
product or change inner parameter.
*Information of this user manual is subject to
change without prior notice.
18

24/9 Powells Road, Brookvale NSW Australia 2100 [email protected]
www.tecsunradios.com.au