Teka Intra VK50inset User manual

POLISHED
Art. no.
GTIN
VK50NF
7393069022216
Overall dimension in mm 555 x 455 x 230
Depth in mm 230
Bowl dim. in mm 500 x 400 x 230
Cut-out dimension, inset
model 520 x 420, R80
Waste hole dim. in mm Ø52
Volume in 34
Material AISI 304
Material thickness in mm 0,9
Gross weight in kg 4.00
Weight, pallet 96.00
Pcs per pallet 24
Description
Utility sink in st inless steel, for inset. Supplied with
fixing clips nd hole for overflow.
Installation
Cut hole in the t ble top using the enclosed 1:1
templ te. Pl ce the sink in the hole. F sten the sink to
the t ble top from underne th with the fixing clips.
Utility sink VK50inset
FDV Revision 20200507www.intra-teka.com

Installation VK50inset
ASSEMBLY:
Included in the box:
* Wash basin
* Clips
* Cutting template 1: 1
Addition: alve with overflow
Make sure all parts are in place before assembly
commences.
When placing the sink in the worktop, space should
be used for bench mounting of the mixer between the
wall and the wash basin.
Cut holes in worktop according to 1: 1 cutout
template. Place the sink in the worktop and screw the
fixing screws that are located in the clips along the
side of the tub.
For maximum leg thickness 40mm.
SPARE PARTS:
Klips: 1926001
2
FDV Revision 20200507www.intra-teka.com

Maintenance VK50inset
Maintenance of Intra products in stainless steel
Congratulations on your purchase of an Intra product
that has been produced with care and to a high
quality. Many of our products are supplied with a
plastic film. This film protects the product during the
transport and has to be removed before use.
To keep the original quality of your Intra product in
AISI 04 stainless steel, we recommend regular
cleaning. Use washing
up liquid and clean water to clean the product after
use. Rinse carefully and dry.
Don’t forget to clean all loose parts, e g the drain
grating.
Please have the following in mind
• Don’t let water or other liquids dry on the product.
In this way you avoid that a grey coating builds up on
the steel.
• Stainless steel can stand hard treatment but sharp
objects can easily scratch the surface. These scratches
are more visible
when the product is new. After a period of use these
marks will be smoothed out, without the product
loosing its lustre.
• Never use scouring powder or steel wool to clean
the surface. Apart from the risk of scratches, there is
also a risk that rust stains will attack the steel.
• Avoid Chlorine based solutions coming into contact
with the stainless steel.
• Silver polish leaves spots that cannot be
removed.
• Food-stuffs that contain acid or other substances
must quickly be removed (e.g. juices, salt, mustard,
mayonnaise).
Discoloration
More stubborn spots are often caused by impurities
in the water or household substances. These can be
removed with special polish agents for stainless steel.
We recommend the use of Intra Shining Kit. Dull
spots can become lustrous again if rubbed with chalk
on a soft cloth.
3
FDV Revision 20200507www.intra-teka.com