Tekmand D User manual

Other Functions
1.Support several languages (simplified Chinese, Traditional Chinese, English,
Japanese, Korea, French)
2.Support several input languages (Chinese, English, Korean)
3.Brand-new design, easy to understand
4.Support several PC backup
5.Support LTP&HTP, available to offer ways for switching between LTP & HTP
6.Support CITP available to preview the media sever video
7.Support MIDI/LTC (SMPTE) music time code, for the convenience of
synchronizing recording and triggering
8.Support IOS/ANDROID system
9.Powerful and vivid 3D stage animating effect, easy for off-line programming
10.Powerful layout, several operation modes are available
11.Support several network protocol: Artnet, ACN, etc
12.Support several users to operate, each user's permission can be set.
13.Support RDM remote control on the fixture
14.Built in media player clear and smooth play
,
-,
--8
Note: The remark of “Only adapted in the area that is below the altitude height of
2000m” or similar warning remarks should be pasted in the obvious place on the
equipment which can only be used under the altitude height of 2000m, such as the
following:

--11
Brief introduction
1.Connect the lighting console to the power and switch on the power. Press SETUP
button on the operation panel after 3 screens are on normal display, then the user can
operate the console, such as setup, detecting the hardware, correcting the screen,
etc.
2.Concept: User interface
The tekmand D's touch screens offer powerful operation interface for the user. The
little screens displayed on the controller can show more info. The user can click
these little screens to realize different functions. The user defined zone allows the
user to manage the windows by themselves.
3.Concept: executor
The executor is used to control and executed stored contents. On most cases, most
executors are used to connect to sequences and work as a replay tool.
The executor can be also used to allocate others, like micro, cue, etc.

--12
1. The user should read the user manual before operation.
2. The ambient temperature should not exceed 40 ° when using the console. Avoid to use it
under the humid or dusty environment.
3. Store it in the clean and dry environment. Keep the power cable in good condition and do
not let the power cable crack.
4. Pay attention to heat dissipation after operation for a long time.
5.This manual just offers the basic info. For any other questions, please refer to
.www.fineart-light.com
1.Press the TOOLs button and a login window will pop up. Then enter user
name and password.
Note: