Tektronix PQA600A Use and care manual

x
PQA600A Picture Quality Analyzer
Specifications
ZZZ
Technical Reference
*P077078900*
077-0789-00

PQA600A Picture Quality Analyzer
Specifications
ZZZ
Technical Reference
xx
www.tektronix.com
077-0789-00

Copyright © Tektronix. All rights reserved. Licensed software products are owned by Tektronix or its subsidiaries or suppliers, and are
protected by national copyright laws and international treaty provisions.
Tektronix products are covered by U.S. and foreign patents, issued and pending. Information in this publication supersedes that in all
previously published material. Specifications and price change privileges reserved.
TEKTRONIX and TEK are registered trademarks of Tektronix, Inc.
Contacting Tektronix
Tektronix, Inc.
14150 SW Karl Braun Drive
P.O. Box 500
Beaverton, OR 97077
USA
For product information, sales, service, and technical support:
In North America, call 1-800-833-9200.
Worldwide, visit www.tektronix.com to find contacts in your area.

Warranty
Tektronix warrants that this product will be free from defects in materials and workmanship for a period of one (1) year from the date of
shipment. If any such product proves defective during this warranty period, Tektronix, at its option, either will repair the defective
product without charge for parts and labor, or will provide a replacement in exchange for the defective product. Parts, modules and
replacement products used by Tektronix for warranty work may be new or reconditioned to like new performance. All replaced
parts, modules and products become the property of Tektronix.
In order to obtain service under this warranty, Customer must notify Tektronix of the defect before the expiration of the warranty period
and make suitable arrangements for the performance of service. Customer shall be responsible for packaging and shipping the
defective product to the service center designated by Tektronix, with shipping charges prepaid. Tektronix shall pay for the return of the
product to Customer if the shipment is to a location within the country in which the Tektronix service center is located. Customer shall
be responsible for paying all shipping charges, duties, taxes, and any other charges for products returned to any other locations.
This warranty shall not apply to any defect, failure or damage caused by improper use or improper or inadequate maintenance and
care. Tektronix shall not be obligated to furnish service under this warranty a) to repair damage resulting from attempts by personnel
other than Tektronix representatives to install, repair or service the product; b) to repair damage resulting from improper use or
connection to incompatible equipment; c) to repair any damage or malfunction caused by the use of non-Tektronix supplies; or
d) to service a product that has been modified or integrated with other products when the effect of such modification or integration
increases the time or difficulty of servicing the product.
THIS WARRANTY IS GIVEN BY TEKTRONIX WITH RESPECT TO THE PRODUCT IN LIEU OF ANY OTHER WARRANTIES,
EXPRESS OR IMPLIED. TEKTRONIX AND ITS VENDORS DISCLAIM ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE. TEKTRONIX' RESPONSIBILITY TO REPAIR OR REPLACE DEFECTIVE PRODUCTS
IS THE SOLE AND EXCLUSIVE REMEDY PROVIDED TO THE CUSTOMER FOR BREACH OF THIS WARRANTY. TEKTRONIX
AND ITS VENDORS WILL NOT BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES
IRRESPECTIVE OF WHETHER TEKTRONIX OR THE VENDOR HAS ADVANCE NOTICE OF THE POSSIBILITY OF SUCH
DAMAGES.
[W2 – 15AUG04]

Table of Contents
Table of Contents
General safety summary .............................................................................................................. iii
Preface................................................................................................................................. v
Product documentation .......................................................................................................... v
Specifications.......................................................................................................................... 1
PQA600A Specifications Technical Reference i

Table of Contents
ii PQA600A Specifications Technical Reference

General safety summary
General safety summary
Review the following safety precautions to avoid injury and prevent damage to this product or any products connected to it.
To avoid potential hazards, use this product only as specified.
Only qualified personnel should perform service procedures.
While using this product, you may need to access other parts of a larger system. Read the safety sections of the other
component manuals for warnings and cautions related to operating the system.
To avoid fire or personal injury
Use proper power cord. Use only the power cord specified for this product and certified for the country of use.
Ground the product. This product is grounded through the grounding conductor of the power cord. To avoid electric
shock, the grounding conductor must be connected to earth ground. Before making connections to the input or output
terminals of the product, ensure that the product is properly grounded.
Observe all terminal ratings. To avoid fire or shock hazard, observe all ratings and markings on the product. Consult the
product manual for further ratings information before making connections to the product.
Power disconnect. The power cord disconnects the product from the power source. Do not block the power cord; it
must remain accessible to the user at all times.
Do not operate without covers. Do not operate this product with covers or panels removed.
Do not operate with suspected failures. If you suspect that there is damage to this product, have it inspected by
qualified service personnel.
Avoid exposed circuitry. Do not touch exposed connections and components when power is present.
Do not operate in wet/damp conditions.
Do not operate in an explosive atmosphere.
Keep product surfaces clean and dry.
Provide proper ventilation. Refer to the manual's installation instructions for details on installing the product so it has
proper ventilation.
PQA600A Specifications Technical Reference iii

General safety summary
Termsinthismanual
These terms may appear in this manual:
WARNING. Warning statements identify conditions or practices that could result in injury or loss of life.
CAUTION. Caution statements identify conditions or practices that could result in damage to this product or other property.
Symbols and terms on the product
These terms may appear on the product:
DANGER indicates an injury hazard immediately accessible as you read the marking.
WARNING indicates an injury hazard not immediately accessible as you read the marking.
CAUTION indicates a hazard to property including the product.
The following symbol(s) may appear on the product:
iv PQA600A Specifications Technical Reference

Preface
Preface
This document provides the specifications for the PQA600A Picture Quality Analyzer.
Product documentation
All of the following documents can be found on the Tektronix Web site (www.tektronix.com/manuals).
To read about Use this document (Tektronix part number)
Installation and safety information PQA600A and PQASW Quick Start User Manual (071-3119-XX).
This printed manual contains information about product safety and
compliance and describes how to install the instrument. Also included are
basic instructions on how to start using the PQA analyzer.
In-depth operating and reference information PQA600A and PQASW User Technical Reference (077-0812-XX).
This PDF manual contains detailed information about operating the
instrument, including how measurements are calculated and displayed.
Also included are instructions for reconfiguring the PQA600A system to
recover from a system failure.
Preconfigured measurements PQA600A and PQASW Measurements Reference (071-3157-XX).
This printed manual contains information about using the preconfigured
measurements provided with the product.
PQA600A specifications PQA600A Specifications Technical Reference (077-0789-XX).
This PDF manual contains the specifications for the PQA600A hardware.
PQA600A data security PQA600A Declassification and Security Instructions (077-0788-XX).
This PDF manual contains the Dell Statement of Volatility for the Dell
Precision Workstation T7600, which provides information for securing data
on the product.
Known issues with the product PQA600A and PQASW Release Notes (077-0787-XX).
This PDF manual contains information about new features and known
issues with the PQA software.
PC platform information Refer to the PC platform documentation for information about the PC
platform hardware and software. The PC platform documentation is
available at the Dell Web site (www.dell.com).
PQA600A Specifications Technical Reference v

Specifications
Specifications
Performance conditions
The Performance Requirements are valid if the instrument has been adjusted at approximately 25 °C, is being operated
within environmental limits (see Table 2), and has had a minimum warm-up of 20 minutes.
General characteristics
Table 1: Power consumption
Characteristic Performance requirements Supplemental information
Power rating 100 V (4.0 A) – 240 V (2.0 A)
AC Input Voltage Range 100 – 240 VAC
AC input frequency 50/60 Hz
Minimum Efficiency (Energy Star
Qualified)
65%
85% efficient power supply Yes
WARNING. To reduce the risk of fire and shock, verify that mains supply voltage fluctuations do not exceed 10% of the
operating voltage range.
Table 2: Environmental characteristics
Characteristics Information Supplemental information
Temperature
Operating
Non-operating
+10°Cto+35°C(+50°Fto+95°F)
–40 °C to +65 °C (–40 °F to +149 °F)
Humidity
Operating and Non-operating 20% to 80%, non-condensing
Shock
Operating
Non-operating
40 G ±5% with pulse duration of 2 ms ±10%
105 G ±5% with pulse duration of 2 ms ±10%
Vibration
Operating
Non-operating
5 Hz to 350 Hz at 0.0002 G2/Hz 1
5 Hz to 500 Hz at 0.001 G2/Hz
Altitude
Operating
Non-operating
–15.2 m to 3,048 m (-50 ft to 10,000 ft)
–15.2 m to 10,668 m (-50 ft to 35,000 ft)
Airborne contaminant level G1 as defined by ISA-S71.04-1985
1The data stream to and from the RAID disks may be interrupted at 60 Hz and above.
1PQA600A Specifications Technical Reference